First post, and sorry it's off topic.
I have been fruitlessly searching for a convenient way to switch HRD v6 between locations and rigs/antennas. Any help? As I approach my 72nd birthday, sitting on the ground after throwing a randomwire into a tree is difficult. I'd like to find an integral lightweight chair/table/sunshade combo to supplement the KX2 go kit. Any help there? Thanks in advance. Expecting good results from the many contributors I've observed while lurking. 73 from Greenville, SC, Jim, N3SZ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Well....
Tools-->Configure-->My Station You can create as many stations as necessary to handle different locations and equipment setups... Note: If you are using LoTW, you'll need to pay attention to the station distance rules, et al to decide if you need more than one set of TQSL credentials... ______________________ Clay Autery, KY5G MONTAC Enterprises (318) 518-1389 On 5/12/2017 3:34 PM, Jim Sr Sturges wrote: > First post, and sorry it's off topic. > > I have been fruitlessly searching for a convenient way to switch HRD v6 > between locations and rigs/antennas. Any help? > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by Jim Sr Sturges
Jim,
I am not an HRD expert, but I have used the feature in DM780 that sets up multiple Log Entry profiles to do just what you want. All you have to do is put in a profile and a Locator combination for where you are and each rig you might use at that location. I have 8 combinations now that I can select depending on the situation. Once you have opened DM780 and the Logbook in HRD, go to the Logbook Menu, select My Station, and you will find the editor that lets you create or remove as many locations as you need. Jack KD4IZ Sent from my iPhone > On May 12, 2017, at 16:34, Jim Sr Sturges <[hidden email]> wrote: > > First post, and sorry it's off topic. > > I have been fruitlessly searching for a convenient way to switch HRD v6 > between locations and rigs/antennas. Any help? > > As I approach my 72nd birthday, sitting on the ground after throwing a > randomwire into a tree is difficult. I'd like to find an integral > lightweight chair/table/sunshade combo to supplement the KX2 go kit. Any > help there? > > Thanks in advance. Expecting good results from the many contributors I've > observed while lurking. > > 73 from Greenville, SC, > > Jim, N3SZ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Free forum by Nabble | Edit this page |