OT: Smart Tweezers

[Ken G Kopp]

This is really slick.  Not cheap........but if you work with micro components,
it might be worth it.

http://www.smarttweezers.com/Smart_Tweezers_LCR_Meter.htm

73! Ken - K0PP
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[wb4jfi]

I have had one of these for a while now.  Getting the wrong parts from
Digikey one time pushed me over the edge to get them.  Highly recommended,
but not cheap.
Terry, WB4JFI


-----Original Message-----
From: Ken G Kopp
Sent: Thursday, September 27, 2012 5:44 PM
To: [hidden email]
Subject: [Elecraft] OT: Smart Tweezers

This is really slick.  Not cheap........but if you work with micro
components,
it might be worth it.

http://www.smarttweezers.com/Smart_Tweezers_LCR_Meter.htm

73! Ken - K0PP
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bill K9YEQ]

I have the older version.  I test every component just to be sure.  They are
super.  If you have the cash, do get one.  Amazing device.

73,
Bill
K9YEQ


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Ken G Kopp
Sent: Thursday, September 27, 2012 4:44 PM
To: [hidden email]
Subject: [Elecraft] OT: Smart Tweezers

This is really slick.  Not cheap........but if you work with micro
components, it might be worth it.

http://www.smarttweezers.com/Smart_Tweezers_LCR_Meter.htm

73! Ken - K0PP
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

I have the AADE LC meter, and I have my DMM for resistance.  I
constructed "tweezers" from PC board material that terminate in clip
leads so I can connect the above mentioned devices to the tweezers.
Almost zero cost and it works well for me.

73,
Don W3FPR

On 9/27/2012 6:55 PM, Bill K9YEQ wrote:
> I have the older version.  I test every component just to be sure.  They are
> super.  If you have the cash, do get one.  Amazing device.
>
> 73,
> Bill
> K9YEQ
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html