Has anyone found a suitable replacement ear pad. Mine are worn out. Otherwise the headset is good and hate to discard it. Did not find anything in the archives.
73, George NC5G |
For the price of the headset...............order a new
one...........trash the old one. I'd expect cost of the ear pads plus shipping is ........... 1/2 the cost of a new headset. 73 Bob, K4TAX On 7/30/2017 10:18 PM, George Winship, NC5G wrote: > Has anyone found a suitable replacement ear pad. Mine are worn out. Otherwise > the headset is good and hate to discard it. Did not find anything in the > archives. > > 73, George NC5G > > > > -- > View this message in context: http://elecraft.365791.n2.nabble.com/OT-Yamaha-CM-500-ear-pads-tp7632896.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by George Winship, NC5G
Bob, K4TAX, Isis probably right. You could try getting a set of Koss SB40 pads but it's probably not worth the trouble.
https://www.koss.com/headphones/headsets/sb40 73, Gary K9GS -------- Original message --------From: Bob McGraw K4TAX <[hidden email]> Date: 7/30/17 10:24 PM (GMT-06:00) To: [hidden email] Subject: Re: [Elecraft] OT Yamaha CM-500 ear pads For the price of the headset...............order a new one...........trash the old one. I'd expect cost of the ear pads plus shipping is ........... 1/2 the cost of a new headset. 73 Bob, K4TAX On 7/30/2017 10:18 PM, George Winship, NC5G wrote: > Has anyone found a suitable replacement ear pad. Mine are worn out. Otherwise > the headset is good and hate to discard it. Did not find anything in the > archives. > > 73, George NC5G > > > > -- > View this message in context: http://elecraft.365791.n2.nabble.com/OT-Yamaha-CM-500-ear-pads-tp7632896.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
If any of these Koss options will fit, they sell them for $5 and have a
free ground shipping option. https://www.koss.com/accessories/cushions 73, Josh W6XU On 7/30/2017 8:55 PM, GaryK9GS wrote: > Bob, K4TAX, Isis probably right. You could try getting a set of Koss SB40 pads but it's probably not worth the trouble. > https://www.koss.com/headphones/headsets/sb40 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by George Winship, NC5G
Might try musical instrument vendors. Good sources for foot switches, etc.
Maybe an inquiry on Amazon would turn them up. It has "everything"! (:-)) 73 K0PP On Jul 30, 2017 21:18, "George Winship, NC5G" <[hidden email]> wrote: > Has anyone found a suitable replacement ear pad. Mine are worn out. > Otherwise > the headset is good and hate to discard it. Did not find anything in the > archives. > > 73, George NC5G > > > > -- > View this message in context: http://elecraft.365791.n2. > nabble.com/OT-Yamaha-CM-500-ear-pads-tp7632896.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by Gary K9GS
Yup, just looked ... Amazon has several vendors offering the ear pads.
73 K0PP On Jul 30, 2017 21:57, "GaryK9GS" <[hidden email]> wrote: > Bob, K4TAX, Isis probably right. You could try getting a set of Koss SB40 > pads but it's probably not worth the trouble. > https://www.koss.com/headphones/headsets/sb40 > > > 73, > Gary K9GS > -------- Original message --------From: Bob McGraw K4TAX < > [hidden email]> Date: 7/30/17 10:24 PM (GMT-06:00) To: > [hidden email] Subject: Re: [Elecraft] OT Yamaha CM-500 ear pads > For the price of the headset...............order a new > one...........trash the old one. I'd expect cost of the ear pads plus > shipping is ........... 1/2 the cost of a new headset. > > 73 > > Bob, K4TAX > > > On 7/30/2017 10:18 PM, George Winship, NC5G wrote: > > Has anyone found a suitable replacement ear pad. Mine are worn out. > Otherwise > > the headset is good and hate to discard it. Did not find anything in the > > archives. > > > > 73, George NC5G > > > > > > > > -- > > View this message in context: http://elecraft.365791.n2. > nabble.com/OT-Yamaha-CM-500-ear-pads-tp7632896.html > > Sent from the Elecraft mailing list archive at Nabble.com. > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[hidden email] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to [hidden email] > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by Gary K9GS
Search on eBay.
Try a couple different words if it doesn't show the results you want. I'll bet you'll find some Chicom stuff cheap with free shipping & no tax. It may take a week or two to get here, but the price is right. And before you send me an "All 'Made in China' stuff is junk" email, I have had the opposite experience. I've bought lots of little stuff, connectors, misc parts, etc., that way and have yet to be disappointed in the quality. 73, Charlie k3ICH -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of GaryK9GS Sent: Sunday, July 30, 2017 11:56 PM To: Bob McGraw K4TAX <[hidden email]>; [hidden email] Subject: Re: [Elecraft] OT Yamaha CM-500 ear pads Bob, K4TAX, Isis probably right. You could try getting a set of Koss SB40 pads but it's probably not worth the trouble. https://www.koss.com/headphones/headsets/sb40 73, Gary K9GS -------- Original message --------From: Bob McGraw K4TAX <[hidden email]> Date: 7/30/17 10:24 PM (GMT-06:00) To: [hidden email] Subject: Re: [Elecraft] OT Yamaha CM-500 ear pads For the price of the headset...............order a new one...........trash the old one. I'd expect cost of the ear pads plus shipping is ........... 1/2 the cost of a new headset. 73 Bob, K4TAX On 7/30/2017 10:18 PM, George Winship, NC5G wrote: > Has anyone found a suitable replacement ear pad. Mine are worn out. Otherwise > the headset is good and hate to discard it. Did not find anything in the > archives. > > 73, George NC5G > > > > -- > View this message in context: http://elecraft.365791.n2.nabble.com/OT-Yamaha-CM-500-ear-pads-tp7632896.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by George Winship, NC5G
I have both the CM-500 and the Koss SB45, I get the same reports on the air. The Koss is $25 shipped from Amazon which to me makes it a throwaway....
73 Tex |
In reply to this post by George Winship, NC5G
Not a replacement ear pad, but if you get a new headset, you might want
to cover them with a "Garfield Headphone Softie." These covers protect the original ear pad and, IMHO, make the headphones more comfortable on the ear. I use them on my CM500 headset and my Sony MDR-7506 headphones. https://www.bhphotovideo.com/c/product/368310-REG/Garfield_SGARHS1_Headphone_Softie_Earpad.html 73, Dan ********** *George Winship, NC5G* gwwa5uih at hotmail.com <mailto:elecraft%40mailman.qth.net?Subject=Re%3A%20%5BElecraft%5D%20OT%20Yamaha%20CM-500%20ear%20pads&In-Reply-To=%3C1501471086268-7632896.post%40n2.nabble.com%3E> /Sun Jul 30 23:18:06 EDT 2017/ ------------------------------------------------------------------------ Has anyone found a suitable replacement ear pad. Mine are worn out. Otherwise the headset is good and hate to discard it. Did not find anything in the archives. 73, George NC5G ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Yeah, but really nice velour* replacement pads for the Sony's can be had for
not much more than the $17 they want for those covers. Charlie k3ICH *Sweetwater has the best Beyerdynamic velour pads. These are much more comfortable than the OEM, AND they won't flake off like the originals. I have them on several Sony MDR7506's, which by the way, have much better hi freq response than the CM-500, but obviously do not have a boom mike. Try the Sony's. You'll hear stuff you didn't know was there in your music collection. Great for all us aging types that are losing our high-end hearing too. -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Dan Atchison via Elecraft Sent: Monday, July 31, 2017 7:47 AM To: [hidden email] Subject: Re: [Elecraft] OT Yamaha CM-500 ear pads Not a replacement ear pad, but if you get a new headset, you might want to cover them with a "Garfield Headphone Softie." These covers protect the original ear pad and, IMHO, make the headphones more comfortable on the ear. I use them on my CM500 headset and my Sony MDR-7506 headphones. https://www.bhphotovideo.com/c/product/368310-REG/Garfield_SGARHS1_Headphone _Softie_Earpad.html 73, Dan ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by George Winship, NC5G
Thanks, everyone, for your suggestions. I'll check them out.
|
In reply to this post by George Winship, NC5G
I ordered Koss UR40 cushions from Koss and they were $5.00 + $0.35 Tax (S+H
FREE) to my Winter Home in Florida. Perfect fit but snug and awkward to install. I looked how to do them on Youtube. There are several screws to loosen under the rim of the old ones. They were mail delivered in less than a week. Much cheaper than a new headset. Mike VE3EQP .....> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Bob, et al,
I installed the Koss UR40 pads on the CM-500 headset. I can't remember which video but the Yamaha and Koss are the same size pads. 73 Mike VE3EQP .....> > ---------- Original Message ---------- > From: "Bob Wilson, N6TV" <[hidden email]> > Date: August 4, 2017 at 9:45 PM > > > Mike, > > Which video? Are you installing the new UR40 pads on a CM500 or on a KOSS? > > 73, > Bob, N6TV > > On Fri, Aug 4, 2017 at 5:10 PM, mpupeza mpupeza <[hidden email]> > wrote: > > > I ordered Koss UR40 cushions from Koss and they were $5.00 + $0.35 Tax (S+H > > FREE) to my Winter Home in Florida. Perfect fit but snug and awkward to > > install. > > I looked how to do them on Youtube. There are several screws to loosen > > under the > > rim of the old ones. They were mail delivered in less than a week. Much > > cheaper > > than a new headset. > > Mike VE3EQP .....> Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
If you get a set of Beyerdynamics velour pads, you'll never go back to that
flaky vinyl surface that OEM Yamaha and Sony use. They may even be to exact same size too , so I'd bet the Sony type will fit the CM-500. I have both and they look identical. They're a tad pricier at about $23 than the cheap Chicom replacements and best price I've found on them is from Sweetwater Music. As a side note, I bought a cheap set of pads for a couple bucks, and they ruined the sound of the Sony's, because they were too small and didn't fit my ears properly. They are now in the trash. The Beyerdynamics fit perfectly and are very comfortable. 73, Charlie k3ICH -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of mpupeza mpupeza Sent: Friday, August 04, 2017 11:47 PM To: Bob Wilson, N6TV <[hidden email]>; elecraft <[hidden email]> Subject: Re: [Elecraft] OT Yamaha CM-500 ear pads Bob, et al, I installed the Koss UR40 pads on the CM-500 headset. I can't remember which video but the Yamaha and Koss are the same size pads. 73 Mike VE3EQP .....> > ---------- Original Message ---------- > From: "Bob Wilson, N6TV" <[hidden email]> > Date: August 4, 2017 at 9:45 PM > > > Mike, > > Which video? Are you installing the new UR40 pads on a CM500 or on a KOSS? > > 73, > Bob, N6TV > > On Fri, Aug 4, 2017 at 5:10 PM, mpupeza mpupeza <[hidden email]> > wrote: > > > I ordered Koss UR40 cushions from Koss and they were $5.00 + $0.35 > > Tax (S+H > > FREE) to my Winter Home in Florida. Perfect fit but snug and awkward > > to install. > > I looked how to do them on Youtube. There are several screws to > > loosen under the rim of the old ones. They were mail delivered in > > less than a week. Much cheaper than a new headset. > > Mike VE3EQP .....> Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
On 8/5/2017 8:07 AM, Charlie T, K3ICH wrote: > If you get a set of Beyerdynamics velour pads, you'll never go back > to that flaky vinyl surface that OEM Yamaha and Sony use. What model number and have you actually tried them on the CM-500? I tried a couple of the generic replacements with the CM-500 and was never able to make them fit properly. Still have my original CM-500 without earpads in the junk box until I find replacements that will fit. I'm about to order the Koss replacements, but if I could get a higher quality version that *is known to fit*, I'd jump on them. 73, ... Joe, W4TV On 8/5/2017 8:07 AM, Charlie T, K3ICH wrote: > If you get a set of Beyerdynamics velour pads, you'll never go back to that > flaky vinyl surface that OEM Yamaha and Sony use. > > They may even be to exact same size too , so I'd bet the Sony type will fit > the CM-500. I have both and they look identical. > > They're a tad pricier at about $23 than the cheap Chicom replacements and > best price I've found on them is from Sweetwater Music. > > As a side note, I bought a cheap set of pads for a couple bucks, and they > ruined the sound of the Sony's, because they were too small and didn't fit > my ears properly. > They are now in the trash. The Beyerdynamics fit perfectly and are very > comfortable. > > 73, Charlie k3ICH > > > > -----Original Message----- > From: [hidden email] > [mailto:[hidden email]] On Behalf Of mpupeza mpupeza > Sent: Friday, August 04, 2017 11:47 PM > To: Bob Wilson, N6TV <[hidden email]>; elecraft <[hidden email]> > Subject: Re: [Elecraft] OT Yamaha CM-500 ear pads > > Bob, et al, > I installed the Koss UR40 pads on the CM-500 headset. I can't remember which > video but the Yamaha and Koss are the same size pads. > 73 > Mike VE3EQP .....> > >> ---------- Original Message ---------- >> From: "Bob Wilson, N6TV" <[hidden email]> >> Date: August 4, 2017 at 9:45 PM >> >> >> Mike, >> >> Which video? Are you installing the new UR40 pads on a CM500 or on a > KOSS? >> >> 73, >> Bob, N6TV >> >> On Fri, Aug 4, 2017 at 5:10 PM, mpupeza mpupeza <[hidden email]> >> wrote: >> >>> I ordered Koss UR40 cushions from Koss and they were $5.00 + $0.35 >>> Tax (S+H >>> FREE) to my Winter Home in Florida. Perfect fit but snug and awkward >>> to install. >>> I looked how to do them on Youtube. There are several screws to >>> loosen under the rim of the old ones. They were mail delivered in >>> less than a week. Much cheaper than a new headset. >>> Mike VE3EQP .....> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Message > delivered to [hidden email] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
News flash! If you don't complete your order at Koss and then wait a bit,
you will get an email from them offering free shipping. So I turned around and ordered 2 set's for $10.00 with free shipping.... 73 Jeff kb2m -----Original Message----- From: Jeff Griffin [mailto:[hidden email]] Sent: Saturday, August 5, 2017 9:38 AM To: '[hidden email]' Subject: RE: [Elecraft] OT Yamaha CM-500 ear pads I was also going to order a replacement set from Koss. The $5.00 I had no problem with, but the $12.95 to ship was a bit much. Now I'm also interested in a set of Beyerdynamics velour pads... 73 Jeff kb2m -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Joe Subich, W4TV Sent: Saturday, August 5, 2017 9:12 AM To: [hidden email] Subject: Re: [Elecraft] OT Yamaha CM-500 ear pads On 8/5/2017 8:07 AM, Charlie T, K3ICH wrote: > If you get a set of Beyerdynamics velour pads, you'll never go back to > that flaky vinyl surface that OEM Yamaha and Sony use. What model number and have you actually tried them on the CM-500? I tried a couple of the generic replacements with the CM-500 and was never able to make them fit properly. Still have my original CM-500 without earpads in the junk box until I find replacements that will fit. I'm about to order the Koss replacements, but if I could get a higher quality version that *is known to fit*, I'd jump on them. 73, ... Joe, W4TV On 8/5/2017 8:07 AM, Charlie T, K3ICH wrote: > If you get a set of Beyerdynamics velour pads, you'll never go back to > that flaky vinyl surface that OEM Yamaha and Sony use. > > They may even be to exact same size too , so I'd bet the Sony type > will fit the CM-500. I have both and they look identical. > > They're a tad pricier at about $23 than the cheap Chicom replacements > and best price I've found on them is from Sweetwater Music. > > As a side note, I bought a cheap set of pads for a couple bucks, and > they ruined the sound of the Sony's, because they were too small and > didn't fit my ears properly. > They are now in the trash. The Beyerdynamics fit perfectly and are > very comfortable. > > 73, Charlie k3ICH > > > > -----Original Message----- > From: [hidden email] > [mailto:[hidden email]] On Behalf Of mpupeza mpupeza > Sent: Friday, August 04, 2017 11:47 PM > To: Bob Wilson, N6TV <[hidden email]>; elecraft > <[hidden email]> > Subject: Re: [Elecraft] OT Yamaha CM-500 ear pads > > Bob, et al, > I installed the Koss UR40 pads on the CM-500 headset. I can't remember > which video but the Yamaha and Koss are the same size pads. > 73 > Mike VE3EQP .....> > >> ---------- Original Message ---------- >> From: "Bob Wilson, N6TV" <[hidden email]> >> Date: August 4, 2017 at 9:45 PM >> >> >> Mike, >> >> Which video? Are you installing the new UR40 pads on a CM500 or on a > KOSS? >> >> 73, >> Bob, N6TV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
They offer free shipping, so dont need to wait, just change shipping options
73, Jorge CX6VM/CW5W <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> Libre de virus. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> 2017-08-05 12:15 GMT-03:00 Jeff Griffin <[hidden email]>: > News flash! If you don't complete your order at Koss and then wait a bit, > you will get an email from them offering free shipping. So I turned around > and ordered 2 set's for $10.00 with free shipping.... > > > 73 Jeff kb2m > > > -----Original Message----- > From: Jeff Griffin [mailto:[hidden email]] > Sent: Saturday, August 5, 2017 9:38 AM > To: '[hidden email]' > Subject: RE: [Elecraft] OT Yamaha CM-500 ear pads > > I was also going to order a replacement set from Koss. The $5.00 I had no > problem with, but the $12.95 to ship was a bit much. Now I'm also > interested > in a set of Beyerdynamics velour pads... > > 73 Jeff kb2m > > -----Original Message----- > From: [hidden email] > [mailto:[hidden email]] On Behalf Of Joe Subich, W4TV > Sent: Saturday, August 5, 2017 9:12 AM > To: [hidden email] > Subject: Re: [Elecraft] OT Yamaha CM-500 ear pads > > > On 8/5/2017 8:07 AM, Charlie T, K3ICH wrote: > > If you get a set of Beyerdynamics velour pads, you'll never go back to > > that flaky vinyl surface that OEM Yamaha and Sony use. > > What model number and have you actually tried them on the CM-500? > > I tried a couple of the generic replacements with the CM-500 and was never > able to make them fit properly. Still have my original CM-500 without > earpads in the junk box until I find replacements that will fit. I'm about > to order the Koss replacements, but if I could get a higher quality version > that *is known to fit*, I'd jump on them. > > 73, > > ... Joe, W4TV > > > On 8/5/2017 8:07 AM, Charlie T, K3ICH wrote: > > If you get a set of Beyerdynamics velour pads, you'll never go back to > > that flaky vinyl surface that OEM Yamaha and Sony use. > > > > They may even be to exact same size too , so I'd bet the Sony type > > will fit the CM-500. I have both and they look identical. > > > > They're a tad pricier at about $23 than the cheap Chicom replacements > > and best price I've found on them is from Sweetwater Music. > > > > As a side note, I bought a cheap set of pads for a couple bucks, and > > they ruined the sound of the Sony's, because they were too small and > > didn't fit my ears properly. > > They are now in the trash. The Beyerdynamics fit perfectly and are > > very comfortable. > > > > 73, Charlie k3ICH > > > > > > > > -----Original Message----- > > From: [hidden email] > > [mailto:[hidden email]] On Behalf Of mpupeza mpupeza > > Sent: Friday, August 04, 2017 11:47 PM > > To: Bob Wilson, N6TV <[hidden email]>; elecraft > > <[hidden email]> > > Subject: Re: [Elecraft] OT Yamaha CM-500 ear pads > > > > Bob, et al, > > I installed the Koss UR40 pads on the CM-500 headset. I can't remember > > which video but the Yamaha and Koss are the same size pads. > > 73 > > Mike VE3EQP .....> > > > >> ---------- Original Message ---------- > >> From: "Bob Wilson, N6TV" <[hidden email]> > >> Date: August 4, 2017 at 9:45 PM > >> > >> > >> Mike, > >> > >> Which video? Are you installing the new UR40 pads on a CM500 or on a > > KOSS? > >> > >> 73, > >> Bob, N6TV > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > -- 73, Jorge CX6VM/CW5W ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Free forum by Nabble | Edit this page |