P3 Beta software Bug?

classic Classic list List threaded Threaded
9 messages Options
Reply | Threaded
Open this post in threaded view
|

P3 Beta software Bug?

Harry_Yingst
I am new to having a P3 (with SVGA).

I loaded the new beta and now there is a red background while in data mode
Is that the Transmit cursor (I do not recall seeing it before)?


I noticed on the VGA monitor the Red will go from Low intensity Red to High
intensity Red when you change the Waterfall Colors form Default to Grey scale.

Reply | Threaded
Open this post in threaded view
|

Re: P3 Beta software Bug?

Rick WA6NHC
Mine too.  Not in CW mode but in data mode.  Didn't check SSB.

73,
Rick wa6nhc

Tiny iPhone 5 keypad, typos are inevitable

> On Apr 25, 2014, at 5:37 PM, Harry_Yingst via Elecraft <[hidden email]> wrote:
>
> I am new to having a P3 (with SVGA).
>
> I loaded the new beta and now there is a red background while in data mode
> Is that the Transmit cursor (I do not recall seeing it before)?
>
>
> I noticed on the VGA monitor the Red will go from Low intensity Red to High
> intensity Red when you change the Waterfall Colors form Default to Grey
> scale.
>
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/P3-Beta-software-Bug-tp7587926.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: P3 Beta software Bug?

Alan Bloom
In reply to this post by Harry_Yingst
One change in the beta firmware is to make the width of the transmit
cursor in "Data A" mode equal to 2.7 kHz.  The reason is that in Data A
mode there is no way for the firmware to know what the actual bandwidth
is - it can be whatever is coming out the PC's sound card.  So rather
than assume narrow-FSK as in the old firmware, the new firmware makes
the cursor width equal to the SSB bandwidth.

Alan N1AL


On 04/25/2014 05:37 PM, Harry_Yingst via Elecraft wrote:

> I am new to having a P3 (with SVGA).
>
> I loaded the new beta and now there is a red background while in data mode
> Is that the Transmit cursor (I do not recall seeing it before)?
>
>
> I noticed on the VGA monitor the Red will go from Low intensity Red to High
> intensity Red when you change the Waterfall Colors form Default to Grey
> scale.
>
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/P3-Beta-software-Bug-tp7587926.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: P3 Beta software Bug?

Elecraft mailing list



The question on weather or not it is a bug is the change in intensity of the Red on the
External monitor when going from default to Grey scale (I may have not made that clear).







________________________________
 From: Alan Bloom <[hidden email]>
To: [hidden email]
Sent: Friday, April 25, 2014 8:59 PM
Subject: Re: [Elecraft] P3 Beta software Bug?
 

One change in the beta firmware is to make the width of the transmit
cursor in "Data A" mode equal to 2.7 kHz.  The reason is that in Data A
mode there is no way for the firmware to know what the actual bandwidth
is - it can be whatever is coming out the PC's sound card.  So rather
than assume narrow-FSK as in the old firmware, the new firmware makes
the cursor width equal to the SSB bandwidth.

Alan N1AL


On 04/25/2014 05:37 PM, Harry_Yingst via Elecraft wrote:

> I am new to having a P3 (with SVGA).
>
> I loaded the new beta and now there is a red background while in data mode
> Is that the Transmit cursor (I do not recall seeing it before)?
>
>
> I noticed on the VGA monitor the Red will go from Low intensity Red to High
> intensity Red when you change the Waterfall Colors form Default to Grey
> scale.
>
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/P3-Beta-software-Bug-tp7587926.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: P3 Beta software Bug?

Mike K2MK
In reply to this post by Alan Bloom
Hi Alan,

I think you should go a bit deeper and read the data sub mode and the DSP bandwidth and have the transmit cursor agree more closely to how the operator is listening to signals. When I'm operating split in RTTY the last thing I want to see is a 2.7KHz wide red cursor cluttering up the screen. If you can't do this then there could be a menu option to adjust the red cursor width.

73,
Mike K2MK

Alan Bloom wrote
One change in the beta firmware is to make the width of the transmit
cursor in "Data A" mode equal to 2.7 kHz.  The reason is that in Data A
mode there is no way for the firmware to know what the actual bandwidth
is - it can be whatever is coming out the PC's sound card.  So rather
than assume narrow-FSK as in the old firmware, the new firmware makes
the cursor width equal to the SSB bandwidth.

Alan N1AL


On 04/25/2014 05:37 PM, Harry_Yingst via Elecraft wrote:
> I am new to having a P3 (with SVGA).
>
> I loaded the new beta and now there is a red background while in data mode
> Is that the Transmit cursor (I do not recall seeing it before)?
>
>
> I noticed on the VGA monitor the Red will go from Low intensity Red to High
> intensity Red when you change the Waterfall Colors form Default to Grey
> scale.
>
Reply | Threaded
Open this post in threaded view
|

Re: P3 Beta software Bug?

Joe Subich, W4TV-4

I agree here ... FSK D, AFSK A, and PSK D should show 400, 400 and 100
Hz, while only DATA A should show the full 2.7 or 2.8 KHz.

It would also be very nice if *NORM* would default to 2.8 KHz in DATA A
on the K3 rather than 400 Hz (which is only appropriate for FSK D and
AFSK A).

73,

    ... Joe, W4TV


On 4/26/2014 9:02 AM, Mike K2MK wrote:

> Hi Alan,
>
> I think you should go a bit deeper and read the data sub mode and the DSP
> bandwidth and have the transmit cursor agree more closely to how the
> operator is listening to signals. When I'm operating split in RTTY the last
> thing I want to see is a 2.7KHz wide red cursor cluttering up the screen. If
> you can't do this then there could be a menu option to adjust the red cursor
> width.
>
> 73,
> Mike K2MK
>
>
> Alan Bloom wrote
>> One change in the beta firmware is to make the width of the transmit
>> cursor in "Data A" mode equal to 2.7 kHz.  The reason is that in Data A
>> mode there is no way for the firmware to know what the actual bandwidth
>> is - it can be whatever is coming out the PC's sound card.  So rather
>> than assume narrow-FSK as in the old firmware, the new firmware makes
>> the cursor width equal to the SSB bandwidth.
>>
>> Alan N1AL
>>
>>
>> On 04/25/2014 05:37 PM, Harry_Yingst via Elecraft wrote:
>>> I am new to having a P3 (with SVGA).
>>>
>>> I loaded the new beta and now there is a red background while in data
>>> mode
>>> Is that the Transmit cursor (I do not recall seeing it before)?
>>>
>>>
>>> I noticed on the VGA monitor the Red will go from Low intensity Red to
>>> High
>>> intensity Red when you change the Waterfall Colors form Default to Grey
>>> scale.
>>>
>
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/P3-Beta-software-Bug-tp7587926p7587946.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: P3 Beta software Bug?

Alan Bloom

On 04/26/2014 06:42 AM, Joe Subich, W4TV wrote:
>
> I agree here ... FSK D, AFSK A, and PSK D should show 400, 400 and 100
> Hz, while only DATA A should show the full 2.7 or 2.8 KHz.

Yes, that's how it works.

Alan N1AL

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: P3 Beta software Bug?

Joe Subich, W4TV-4

Except PSK D does not show anything since split is disabled.

73,

    ... Joe, W4TV


On 4/26/2014 11:00 AM, Alan Bloom wrote:

>
> On 04/26/2014 06:42 AM, Joe Subich, W4TV wrote:
>>
>> I agree here ... FSK D, AFSK A, and PSK D should show 400, 400 and 100
>> Hz, while only DATA A should show the full 2.7 or 2.8 KHz.
>
> Yes, that's how it works.
>
> Alan N1AL
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: P3 Beta software Bug?

Mike K2MK
In reply to this post by Alan Bloom
Hi Alan,

My apologies. I misread your prior posting. You said Data A and I misread it as just Data. Please disregard my comments. You've got all of the bases well covered.

73,
Mike K2MK

Alan Bloom wrote
On 04/26/2014 06:42 AM, Joe Subich, W4TV wrote:
>
> I agree here ... FSK D, AFSK A, and PSK D should show 400, 400 and 100
> Hz, while only DATA A should show the full 2.7 or 2.8 KHz.

Yes, that's how it works.

Alan N1AL