[P3][K3][KRX3] Viewing cursors for both receivers on P3

When using the second receiver w/ the K3 and P3, is there a way to have
a second cursor representing the frequency of the 2nd rx on the P3?  
Currently the  only way I have been able to get this to work is to
engage "Split", but my goal is to be able to tune around the same band
with the second rx  (within the current passband of the P3) while
listening to a station on the main RX, and be able to view both VFO's on
the P3 -- while not being in 'split' mode.

73, Dale
WA8SRA

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike K2MK]

Hi Dale,

I always see the VFO-B cursor on my P3. VFO-A is green, VFO-B is magenta, and when in split, the actual transmit frequency is in red. If you don't see the magenta cursor then you may have the VFO-B cursor turned off. Press the P3 menu button and turn the knob until you see VFO B. Press the knob and the cursor should appear.

A secondary problem might be that VFO-B is tuned too far away from VFO-A to still be on the screen. When that happens you will see a magenta arrow pointing in the direction of VFO-B. You might be able to make it visible by increasing the frequency scale of the P3.

73,
Mike K2MK

Dale Boresz wrote

When using the second receiver w/ the K3 and P3, is there a way to have
a second cursor representing the frequency of the 2nd rx on the P3?  
Currently the  only way I have been able to get this to work is to
engage "Split", but my goal is to be able to tune around the same band
with the second rx  (within the current passband of the P3) while
listening to a station on the main RX, and be able to view both VFO's on
the P3 -- while not being in 'split' mode.

73, Dale
WA8SRA

[Eduardo González]

Turn on VFO B menu item of P3

Edu YY4GMJ

On Fri, Sep 28, 2012 at 8:11 AM, Dale Boresz <[hidden email]> wrote:

> When using the second receiver w/ the K3 and P3, is there a way to have
> a second cursor representing the frequency of the 2nd rx on the P3?
> Currently the  only way I have been able to get this to work is to
> engage "Split", but my goal is to be able to tune around the same band
> with the second rx  (within the current passband of the P3) while
> listening to a station on the main RX, and be able to view both VFO's on
> the P3 -- while not being in 'split' mode.
>
> 73, Dale
> WA8SRA
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html