Elecraft › [K3]

[P3] Missing Part: The Hole Cover

Classic

List

Threaded

14 messages Options

Phil Hystad-3

[P3] Missing Part: The Hole Cover

Am I the only one who is missing the hole cover strip that was added to the parts list and assembly instructions in the latest errata to the P3 manual?

I looked everywhere and this is my second inventory of parts. It is not critical and will not hold up my assembly but I was curious if anyone else has it.

73, phil, K7PEH

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

KK7P

Re: [P3] Missing Part: The Hole Cover

It was just received at the factory and added to the product. I
suspect everyone will get one as amatter of course. If there isn't an
announcemnt or a contact in the next few days, you might send an email
requesting one.

Mine doesn't have one, either :-)

73,

Lyle kK7P
> Am I the only one who is missing the hole cover strip that was added to the parts list and assembly instructions in the latest errata to the P3 manual?...
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Dick Dievendorff

Re: [P3] Missing Part: The Hole Cover

In reply to this post by Phil Hystad-3

Most of us don't yet have the hole cover.

Dick, K6KR

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Phil Hystad
Sent: Thursday, August 12, 2010 6:09 PM
To: elecraft Reflector
Subject: [Elecraft] [P3] Missing Part: The Hole Cover

Am I the only one who is missing the hole cover strip that was added to the
parts list and assembly instructions in the latest errata to the P3 manual?

I looked everywhere and this is my second inventory of parts. It is not
critical and will not hold up my assembly but I was curious if anyone else
has it.

73, phil, K7PEH

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Joe Subich, W4TV-4

Re: [P3] Missing Part: The Hole Cover

In reply to this post by Phil Hystad-3

> Am I the only one who is missing the hole cover strip that was added
> to the parts list and assembly instructions in the latest errata to
> the P3 manual?

No. It appears to have been added somewhere around s/n 60 along with
the IF buffer mod. Neither was present in s/n 37.

73,

... Joe, W4TV

On 8/12/2010 9:08 PM, Phil Hystad wrote:

> Am I the only one who is missing the hole cover strip that was added
> to the parts list and assembly instructions in the latest errata to
> the P3 manual?
>
> I looked everywhere and this is my second inventory of parts. It is
> not critical and will not hold up my assembly but I was curious if
> anyone else has it.
>
> 73, phil, K7PEH
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Bill [NS4C]

Re: [P3] Missing Part: The Hole Cover

s/n 81 no hole cover strip but did include K3 I/O output buffer mod kit.

73 Bill NS4C

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Joe Subich, W4TV
Sent: Thursday, August 12, 2010 9:18 PM
To: [hidden email]
Subject: Re: [Elecraft] [P3] Missing Part: The Hole Cover

> Am I the only one who is missing the hole cover strip that was added
> to the parts list and assembly instructions in the latest errata to
> the P3 manual?

No. It appears to have been added somewhere around s/n 60 along with
the IF buffer mod. Neither was present in s/n 37.

73,

... Joe, W4TV

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Phil Hystad-3

Re: [P3] Missing Part: The Hole Cover

In reply to this post by Joe Subich, W4TV-4

What is the IF Buffer Mod -- did I miss something? I am Serial number 0030.

On Aug 12, 2010, at 6:18 PM, Joe Subich, W4TV wrote:

>
>> Am I the only one who is missing the hole cover strip that was added
>> to the parts list and assembly instructions in the latest errata to
>> the P3 manual?
>
> No. It appears to have been added somewhere around s/n 60 along with
> the IF buffer mod. Neither was present in s/n 37.
>
> 73,
>
> ... Joe, W4TV
>
>
> On 8/12/2010 9:08 PM, Phil Hystad wrote:
>> Am I the only one who is missing the hole cover strip that was added
>> to the parts list and assembly instructions in the latest errata to
>> the P3 manual?
>>
>> I looked everywhere and this is my second inventory of parts. It is
>> not critical and will not hold up my assembly but I was curious if
>> anyone else has it.
>>
>> 73, phil, K7PEH
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

Don Wilhelm-4

Re: [P3] Missing Part: The Hole Cover

Phil,

The documentation is available from the Elecraft website. It is only a
resistor value change.
Yes, K3 SN 0030 will need it.

73,
Don W3FPR

Phil Hystad wrote:
> What is the IF Buffer Mod -- did I miss something? I am Serial number 0030.
>
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

AC7AC

Re: [P3] Missing Part: The Hole Cover

In reply to this post by Phil Hystad-3

CONTENTS DELETED

The author has deleted this message.

Craig Smith

Re: [P3] Missing Part: The Hole Cover

In reply to this post by Joe Subich, W4TV-4

Neither was shipped with SN 67.

... Craig AC0DS

<> No. It appears to have been added somewhere around s/n 60 along with
<> the IF buffer mod. Neither was present in s/n 37.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Eric Swartz - WA6HHQ

Re: [P3] Missing Part: The Hole Cover

Administrator

In reply to this post by Phil Hystad-3

The hole cover labels just came in last week and were not included in early P3 shipments. We know who these are and will be sending them out to everyone.

73,
Eric. WA6HHQ

www.elecraft.com
_..._

On Aug 12, 2010, at 6:08 PM, Phil Hystad <[hidden email]> wrote:

> Am I the only one who is missing the hole cover strip that was added to the parts list and assembly instructions in the latest errata to the P3 manual?
>
> I looked everywhere and this is my second inventory of parts. It is not critical and will not hold up my assembly but I was curious if anyone else has it.
>
> 73, phil, K7PEH
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Bruce Beford-2

Re: [P3] Missing Part: The Hole Cover

In reply to this post by Phil Hystad-3

Phil wrote:

➢ What is the IF Buffer Mod -- did I miss something? I am Serial number 0030.

Phil, the IF buffer mod increases the gain of the IF output buffer –inside the K3- by changing a resistor value. What matters is the serial number of the K3, not the P3. Check the Elecraft website K3 mods and enhancements page for details on the resistor swap, and approximate serial number break-in.

Bruce, N1RX

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

k6osx

Re: [P3] Missing Part: The Hole Cover

In reply to this post by Phil Hystad-3

I received my P3 yesterday and the hole cover strip was packaged with the rear panel cover. BTW, I ordered my P3 on April 17.

Vy 73 de k6osx,
Darin

On Aug 12, 2010, at 6:08 PM, Phil Hystad <[hidden email]> wrote:

> Am I the only one who is missing the hole cover strip that was added to the parts list and assembly instructions in the latest errata to the P3 manual?
>
> I looked everywhere and this is my second inventory of parts. It is not critical and will not hold up my assembly but I was curious if anyone else has it.
>
> 73, phil, K7PEH
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

David King-11

[P3] Missing Part: The Hole Cover

In reply to this post by Craig Smith

On 8/122010 Eric posted the following on this subject:

The hole cover labels just came in last week and were not included in early P3 shipments. We know who these are and will be sending them out to everyone.

73,
Eric. WA6HHQ

www.elecraft.com
_..._

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Matt Zilmer

Re: [P3] Missing Part: The Hole Cover

There are also a number of us early adopters that have no serial
number labels. You could send hole cover and s/n labels at the same
time....

Received the larger P3 knob today.

matt W6NIA

On Mon, 16 Aug 2010 14:34:46 -0600, you wrote:

>On 8/122010 Eric posted the following on this subject:
>
>The hole cover labels just came in last week and were not included in early P3 shipments. We know who these are and will be sending them out to everyone.
>
>73,
>Eric. WA6HHQ
>
>www.elecraft.com
>_..._
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html