P3 and K3 VFOB
Locked
 
|
I just noticed on my fairly new P3 that VFO B marker shows up on the screen even though it is on a different band. There is no carrier frequency line like when VFO B is on the same band but the magenta band is there. Is that normal?
John N1JM |
|
|
It also seems to vary with span. It may appear at 25khz span but be off screen at 100khz span, etc.
John N1JM
|
|
|
In reply to this post by John_N1JM
John,
Sounds like what you are seeing is not the VFO B marker but the P3's MKR B. You should be able to move it with the P3's SELECT knob and turn it off by holding the MKR B button on the P3. Rick K6LE On 12/17/2011, at 5:54 , John_N1JM wrote: > I just noticed on my fairly new P3 that VFO B marker shows up on the screen > even though it is on a different band. There is no carrier frequency line > like when VFO B is on the same band but the magenta band is there. Is that > normal? > > John N1JM > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Rick:
It's not marker B. I can turn marker B on and off. If someone wants to check it, tune VFO A to 7.160 and B to 14.155 with span set to 25khz. The magenta bar or u shows up to the left of green A. It moves as you tune VFO B. There is no carrier line, however on B as there is for A. John N1JM |
|
|
John is correct. I can duplicate the symptoms here as well and there is no bright center line, only the magenta bar which does move when you move VFO B. As soon as you configure menu item VFO IND to NO, the line disappears and, of course the two VFO's stay on the same band.
Jim - W0EB > Rick: > > It's not marker B. I can turn marker B on and off. If someone wants > to check > it, tune VFO A to 7.160 and B to 14.155 with span set to 25khz. The > magenta > bar or u shows up to the left of green A. It moves as you tune VFO > B. There > is no carrier line, however on B as there is for A. > > John N1JM > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/P3-and-K3-VFOB- > tp7104075p7104525.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Jim:
Glad I am not alone :-). Maybe this is normal or a bug. Hopefully Elecraft might chime in on this or I will email support. 73, John N1JM On Sat, Dec 17, 2011 at 1:10 PM, Jim Sheldon <[hidden email]> wrote: > John is correct. I can duplicate the symptoms here as well and there is > no bright center line, only the magenta bar which does move when you move > VFO B. As soon as you configure menu item VFO IND to NO, the line > disappears and, of course the two VFO's stay on the same band. > > Jim - W0EB > > > Rick: > > > > It's not marker B. I can turn marker B on and off. If someone wants > > to check > > it, tune VFO A to 7.160 and B to 14.155 with span set to 25khz. The > > magenta > > bar or u shows up to the left of green A. It moves as you tune VFO > > B. There > > is no carrier line, however on B as there is for A. > > > > John N1JM > > > > -- > > View this message in context: > > http://elecraft.365791.n2.nabble.com/P3-and-K3-VFOB- > > tp7104075p7104525.html > > Sent from the Elecraft mailing list archive at Nabble.com. > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[hidden email] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > -- sent on my MacBook Pro ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
The magenta bar actually tracks the KHz digits of VFO B but apparently only in the instance where the difference frequency between VFO A and VFO B is 7 MHz. No matter what either VFO is set to, if you set the other one 7.0 MHz either above or below that frequency, and the P3's SPAN to EXACTLY 25 KHz, the phenomenon occurs. If SPAN is set to anything other than an exact 25 KHz (+/- 12.5) the bar disappears.
Jim - W0EB > Jim: > > Glad I am not alone :-). Maybe this is normal or a bug. Hopefully > Elecraft might chime in on this or I will email support. > > > 73, John N1JM > > On Sat, Dec 17, 2011 at 1:10 PM, Jim Sheldon <[hidden email]> wrote: > >> John is correct. I can duplicate the symptoms here as well and >> there is no bright center line, only the magenta bar which does >> move when you move VFO B. As soon as you configure menu item VFO >> IND to NO, the line disappears and, of course the two VFO's stay >> on the same band. >> > >> Jim - W0EB >> >> Rick: >> >> It's not marker B. I can turn marker B on and off. If someone >> wants >> to check >> it, tune VFO A to 7.160 and B to 14.155 with span set to 25khz. >> The >> magenta >> bar or u shows up to the left of green A. It moves as you tune VFO >> B. There >> is no carrier line, however on B as there is for A. >> >> John N1JM >> >> -- >> View this message in context: >> http://elecraft.365791.n2.nabble.com/P3-and-K3-VFOB- >> tp7104075p7104525.html >> Sent from the Elecraft mailing list archive at Nabble.com. >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: >> http://www.qsl.net/donate.html Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
On my P3 I can get it to do it at 10, 25 and 50 kHz spans. It will also do
it with other combinations of VFOs on different bands at 10, 25, and 50 spans. John N1JM On Sat, Dec 17, 2011 at 1:58 PM, Jim Sheldon <[hidden email]> wrote: > The magenta bar actually tracks the KHz digits of VFO B but apparently > only in the instance where the difference frequency between VFO A and VFO B > is 7 MHz. No matter what either VFO is set to, if you set the other one > 7.0 MHz either above or below that frequency, and the P3's SPAN to EXACTLY > 25 KHz, the phenomenon occurs. If SPAN is set to anything other than an > exact 25 KHz (+/- 12.5) the bar disappears. > > Jim - W0EB > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Jim: > > > > Glad I am not alone :-). Maybe this is normal or a bug. Hopefully > > Elecraft might chime in on this or I will email support. > > > > > > 73, John N1JM > > > > On Sat, Dec 17, 2011 at 1:10 PM, Jim Sheldon <[hidden email]> wrote: > > > >> John is correct. I can duplicate the symptoms here as well and > >> there is no bright center line, only the magenta bar which does > >> move when you move VFO B. As soon as you configure menu item VFO > >> IND to NO, the line disappears and, of course the two VFO's stay > >> on the same band. > >> > > > >> Jim - W0EB > >> > >> Rick: > >> > >> It's not marker B. I can turn marker B on and off. If someone > >> wants > >> to check > >> it, tune VFO A to 7.160 and B to 14.155 with span set to 25khz. > >> The > >> magenta > >> bar or u shows up to the left of green A. It moves as you tune VFO > >> B. There > >> is no carrier line, however on B as there is for A. > >> > >> John N1JM > >> > >> -- > >> View this message in context: > >> http://elecraft.365791.n2.nabble.com/P3-and-K3-VFOB- > >> tp7104075p7104525.html > >> Sent from the Elecraft mailing list archive at Nabble.com. > >> ______________________________________________________________ > >> Elecraft mailing list > >> Home: http://mailman.qth.net/mailman/listinfo/elecraft > >> Help: http://mailman.qth.net/mmfaq.htm > >> Post: mailto:[hidden email] > >> > >> This list hosted by: http://www.qsl.net > >> Please help support this email list: > >> http://www.qsl.net/donate.html > -- sent on my MacBook Pro ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
The more I look at it, it looks like it happens on all bands where VFOs are
on different bands but maybe only at those spans. Of course one could turn of the b VFO marker until the VFOs are on the same band :-). John N1JM On Sat, Dec 17, 2011 at 2:16 PM, John Merrill <[hidden email]> wrote: > On my P3 I can get it to do it at 10, 25 and 50 kHz spans. It will also do > it with other combinations of VFOs on different bands at 10, 25, and 50 > spans. > > John N1JM > > > On Sat, Dec 17, 2011 at 1:58 PM, Jim Sheldon <[hidden email]> wrote: > >> The magenta bar actually tracks the KHz digits of VFO B but apparently >> only in the instance where the difference frequency between VFO A and VFO B >> is 7 MHz. No matter what either VFO is set to, if you set the other one >> 7.0 MHz either above or below that frequency, and the P3's SPAN to EXACTLY >> 25 KHz, the phenomenon occurs. If SPAN is set to anything other than an >> exact 25 KHz (+/- 12.5) the bar disappears. >> >> Jim - W0EB >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> > Jim: >> > >> > Glad I am not alone :-). Maybe this is normal or a bug. Hopefully >> > Elecraft might chime in on this or I will email support. >> > >> > >> > 73, John N1JM >> > >> > On Sat, Dec 17, 2011 at 1:10 PM, Jim Sheldon <[hidden email]> wrote: >> > >> >> John is correct. I can duplicate the symptoms here as well and >> >> there is no bright center line, only the magenta bar which does >> >> move when you move VFO B. As soon as you configure menu item VFO >> >> IND to NO, the line disappears and, of course the two VFO's stay >> >> on the same band. >> >> >> > >> >> Jim - W0EB >> >> >> >> Rick: >> >> >> >> It's not marker B. I can turn marker B on and off. If someone >> >> wants >> >> to check >> >> it, tune VFO A to 7.160 and B to 14.155 with span set to 25khz. >> >> The >> >> magenta >> >> bar or u shows up to the left of green A. It moves as you tune VFO >> >> B. There >> >> is no carrier line, however on B as there is for A. >> >> >> >> John N1JM >> >> >> >> -- >> >> View this message in context: >> >> http://elecraft.365791.n2.nabble.com/P3-and-K3-VFOB- >> >> tp7104075p7104525.html >> >> Sent from the Elecraft mailing list archive at Nabble.com. >> >> ______________________________________________________________ >> >> Elecraft mailing list >> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> >> Help: http://mailman.qth.net/mmfaq.htm >> >> Post: mailto:[hidden email] >> >> >> >> This list hosted by: http://www.qsl.net >> >> Please help support this email list: >> >> http://www.qsl.net/donate.html >> > > > > -- > sent on my MacBook Pro > -- sent on my MacBook Pro ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Not to beat it to death but the 100khz digits on each VFO need to be close to each other for it to happen such as VFO A is 7267 and VFO B is 21261.
John N1JM |
|
|
In reply to this post by John_N1JM
Curious....do you have the second receiver installed to do this?
Gary VK4FD - Motorhome Mobile Elecraft Equipment K3 #679, KPA-500 #018 Living the dream!!! ----- Original Message ----- From: John Merrill To: [hidden email] Sent: Sunday, December 18, 2011 7:37 AM Subject: Re: [Elecraft] P3 and K3 VFOB The more I look at it, it looks like it happens on all bands where VFOs are on different bands but maybe only at those spans. Of course one could turn of the b VFO marker until the VFOs are on the same band :-). John N1JM On Sat, Dec 17, 2011 at 2:16 PM, John Merrill <[hidden email]> wrote: > On my P3 I can get it to do it at 10, 25 and 50 kHz spans. It will also do > it with other combinations of VFOs on different bands at 10, 25, and 50 > spans. > > John N1JM > > > On Sat, Dec 17, 2011 at 1:58 PM, Jim Sheldon <[hidden email]> wrote: > >> The magenta bar actually tracks the KHz digits of VFO B but apparently >> only in the instance where the difference frequency between VFO A and VFO B >> is 7 MHz. No matter what either VFO is set to, if you set the other one >> 7.0 MHz either above or below that frequency, and the P3's SPAN to EXACTLY >> 25 KHz, the phenomenon occurs. If SPAN is set to anything other than an >> exact 25 KHz (+/- 12.5) the bar disappears. >> >> Jim - W0EB >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> > Jim: >> > >> > Glad I am not alone :-). Maybe this is normal or a bug. Hopefully >> > Elecraft might chime in on this or I will email support. >> > >> > >> > 73, John N1JM >> > >> > On Sat, Dec 17, 2011 at 1:10 PM, Jim Sheldon <[hidden email]> wrote: >> > >> >> John is correct. I can duplicate the symptoms here as well and >> >> there is no bright center line, only the magenta bar which does >> >> move when you move VFO B. As soon as you configure menu item VFO >> >> IND to NO, the line disappears and, of course the two VFO's stay >> >> on the same band. >> >> >> > >> >> Jim - W0EB >> >> >> >> Rick: >> >> >> >> It's not marker B. I can turn marker B on and off. If someone >> >> wants >> >> to check >> >> it, tune VFO A to 7.160 and B to 14.155 with span set to 25khz. >> >> The >> >> magenta >> >> bar or u shows up to the left of green A. It moves as you tune VFO >> >> B. There >> >> is no carrier line, however on B as there is for A. >> >> >> >> John N1JM >> >> >> >> -- >> >> View this message in context: >> >> http://elecraft.365791.n2.nabble.com/P3-and-K3-VFOB- >> >> tp7104075p7104525.html >> >> Sent from the Elecraft mailing list archive at Nabble.com. >> >> ______________________________________________________________ >> >> Elecraft mailing list >> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> >> Help: http://mailman.qth.net/mmfaq.htm >> >> Post: mailto:[hidden email] >> >> >> >> This list hosted by: http://www.qsl.net >> >> Please help support this email list: >> >> http://www.qsl.net/donate.html >> > > > > -- > sent on my MacBook Pro > -- sent on my MacBook Pro ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Yes.
On Sat, Dec 17, 2011 at 3:05 PM, Gary VK4FD <[hidden email]> wrote: > ** > Curious....do you have the second receiver installed to do this? > > Gary > > > VK4FD - Motorhome Mobile > Elecraft Equipment > K3 #679, KPA-500 #018 > Living the dream!!! > > ----- Original Message ----- > *From:* John Merrill <[hidden email]> > *To:* [hidden email] > *Sent:* Sunday, December 18, 2011 7:37 AM > *Subject:* Re: [Elecraft] P3 and K3 VFOB > > The more I look at it, it looks like it happens on all bands where VFOs are > on different bands but maybe only at those spans. > Of course one could turn of the b VFO marker until the VFOs are on the same > band :-). > > John N1JM > > On Sat, Dec 17, 2011 at 2:16 PM, John Merrill <[hidden email]> wrote: > > > On my P3 I can get it to do it at 10, 25 and 50 kHz spans. It will also > do > > it with other combinations of VFOs on different bands at 10, 25, and 50 > > spans. > > > > John N1JM > > > > > > On Sat, Dec 17, 2011 at 1:58 PM, Jim Sheldon <[hidden email]> wrote: > > > >> The magenta bar actually tracks the KHz digits of VFO B but apparently > >> only in the instance where the difference frequency between VFO A and > VFO B > >> is 7 MHz. No matter what either VFO is set to, if you set the other one > >> 7.0 MHz either above or below that frequency, and the P3's SPAN to > EXACTLY > >> 25 KHz, the phenomenon occurs. If SPAN is set to anything other than an > >> exact 25 KHz (+/- 12.5) the bar disappears. > >> > >> Jim - W0EB > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > Jim: > >> > > >> > Glad I am not alone :-). Maybe this is normal or a bug. Hopefully > >> > Elecraft might chime in on this or I will email support. > >> > > >> > > >> > 73, John N1JM > >> > > >> > On Sat, Dec 17, 2011 at 1:10 PM, Jim Sheldon <[hidden email]> wrote: > >> > > >> >> John is correct. I can duplicate the symptoms here as well and > >> >> there is no bright center line, only the magenta bar which does > >> >> move when you move VFO B. As soon as you configure menu item VFO > >> >> IND to NO, the line disappears and, of course the two VFO's stay > >> >> on the same band. > >> >> > >> > > >> >> Jim - W0EB > >> >> > >> >> Rick: > >> >> > >> >> It's not marker B. I can turn marker B on and off. If someone > >> >> wants > >> >> to check > >> >> it, tune VFO A to 7.160 and B to 14.155 with span set to 25khz. > >> >> The > >> >> magenta > >> >> bar or u shows up to the left of green A. It moves as you tune VFO > >> >> B. There > >> >> is no carrier line, however on B as there is for A. > >> >> > >> >> John N1JM > >> >> > >> >> -- > >> >> View this message in context: > >> >> http://elecraft.365791.n2.nabble.com/P3-and-K3-VFOB- > >> >> tp7104075p7104525.html > >> >> Sent from the Elecraft mailing list archive at Nabble.com. > >> >> ______________________________________________________________ > >> >> Elecraft mailing list > >> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft > >> >> Help: http://mailman.qth.net/mmfaq.htm > >> >> Post: mailto:[hidden email] <[hidden email]> > >> >> > >> >> This list hosted by: http://www.qsl.net > >> >> Please help support this email list: > >> >> http://www.qsl.net/donate.html > >> > > > > > > > > -- > > sent on my MacBook Pro > > > > > > -- > sent on my MacBook Pro > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] <[hidden email]> > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > -- sent on my MacBook Pro ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by John_N1JM
I can't duplicate any of this on my K3/P3 combo.
73, Stephen G4SJP On 17/12/2011 22:00, "John_N1JM" <[hidden email]> wrote: >Not to beat it to death but the 100khz digits on each VFO need to be >close to >each other for it to happen such as VFO A is 7267 and VFO B is 21261. > >John N1JM > >-- >View this message in context: >http://elecraft.365791.n2.nabble.com/P3-and-K3-VFOB-tp7104075p7104798.html >Sent from the Elecraft mailing list archive at Nabble.com. >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[hidden email] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Gary Gregory
Hadn't thought about that aspect, but yes, I also have the 2nd receiver installed. I didn't try other frequency relationships and only a couple of different SPAN widths when it disappeared after moving off the 25KHz. Getting back in the Stew Perry 160 meter contest so don't have much time to play with this right now.
Jim - W0EB > Curious....do you have the second receiver installed to do this? > > Gary > > > VK4FD - Motorhome Mobile > Elecraft Equipment > K3 #679, KPA-500 #018 > Living the dream!!! > > ----- Original Message ----- > From: John Merrill > To: [hidden email] > Sent: Sunday, December 18, 2011 7:37 AM > Subject: Re: [Elecraft] P3 and K3 VFOB > > > The more I look at it, it looks like it happens on all bands where > VFOs are > on different bands but maybe only at those spans. > Of course one could turn of the b VFO marker until the VFOs are on > the same > band :-). > > John N1JM > > On Sat, Dec 17, 2011 at 2:16 PM, John Merrill <[hidden email]> > wrote: > >> On my P3 I can get it to do it at 10, 25 and 50 kHz spans. It >> will also do >> it with other combinations of VFOs on different bands at 10, 25, >> and 50 >> spans. >> >> John N1JM >> >> >> On Sat, Dec 17, 2011 at 1:58 PM, Jim Sheldon <[hidden email]> wrote: >> >>> The magenta bar actually tracks the KHz digits of VFO B but >>> apparently >>> only in the instance where the difference frequency between VFO >>> A and VFO B >>> is 7 MHz. No matter what either VFO is set to, if you set the >>> other one >>> 7.0 MHz either above or below that frequency, and the P3's SPAN >>> to EXACTLY >>> 25 KHz, the phenomenon occurs. If SPAN is set to anything >>> other than an >>> exact 25 KHz (+/- 12.5) the bar disappears. >>> >>> Jim - W0EB >>> >>> >>>> Jim: >>>> >>>> Glad I am not alone :-). Maybe this is normal or a bug. >>>> Hopefully >>>> Elecraft might chime in on this or I will email support. >>>> >>>> >>>> 73, John N1JM >>>> >>>> On Sat, Dec 17, 2011 at 1:10 PM, Jim Sheldon <[hidden email]> >>>> wrote: >>>> >>>>> John is correct. I can duplicate the symptoms here as well >>>>> and >>>>> there is no bright center line, only the magenta bar which >>>>> does >>>>> move when you move VFO B. As soon as you configure menu >>>>> item VFO >>>>> IND to NO, the line disappears and, of course the two VFO's >>>>> stay >>>>> on the same band. >>>>> >>>> >>>>> Jim - W0EB >>>>> >>>>> Rick: >>>>> >>>>> It's not marker B. I can turn marker B on and off. If >>>>> someone >>>>> wants >>>>> to check >>>>> it, tune VFO A to 7.160 and B to 14.155 with span set to >>>>> 25khz. >>>>> The >>>>> magenta >>>>> bar or u shows up to the left of green A. It moves as you >>>>> tune VFO >>>>> B. There >>>>> is no carrier line, however on B as there is for A. >>>>> >>>>> John N1JM >>>>> >>>>> -- >>>>> View this message in context: >>>>> http://elecraft.365791.n2.nabble.com/P3-and-K3-VFOB- >>>>> tp7104075p7104525.html >>>>> Sent from the Elecraft mailing list archive at Nabble.com. >>>>> ______________________________________________________________ >>>>> Elecraft mailing list >>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>>> Help: http://mailman.qth.net/mmfaq.htm >>>>> Post: mailto:[hidden email] >>>>> >>>>> This list hosted by: http://www.qsl.net >>>>> Please help support this email list: >>>>> http://www.qsl.net/donate.html >> >> >> -- >> sent on my MacBook Pro > > > -- > sent on my MacBook Pro > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Stephen Prior
What firmware version do you have in your P3?
John N1JM
|
|
|
In reply to this post by John_N1JM
John,
Thanks for the exact description so I could confirm the bug. It's very strange - it only happens when cross-band and at certain spans and frequencies. I'll add it to the bug list. Alan N1AL On Sat, 2011-12-17 at 10:58 -0800, John_N1JM wrote: > Rick: > > It's not marker B. I can turn marker B on and off. If someone wants to check > it, tune VFO A to 7.160 and B to 14.155 with span set to 25khz. The magenta > bar or u shows up to the left of green A. It moves as you tune VFO B. There > is no carrier line, however on B as there is for A. > > John N1JM > > -- > View this message in context: http://elecraft.365791.n2.nabble.com/P3-and-K3-VFOB-tp7104075p7104525.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
«
Return to [P3]
|
1 view|%1 views
| Free forum by Nabble | Edit this page |