P3 at 115,200 baud

[Richard Fjeld]

I can't find it now, but someone posted something showing a screen capture with the latest P3 f/w and Utility running at 115,200 baud rate.  

I'd like to know how they got the K3 to go that high?  Mine tops out at 38,400 using 4.39 f/w.


Richard Fjeld, n0ce
[hidden email]
I'd rather be learning.


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

The link between PC and P3  can now be 4800, 9600, 19200, 38400, 57600, or 15200 if your hardware is good enough. The link between P3 and K3 remains 38400. The K3 is not likely to change this. This was done for P3 image transfer.

When commands and responses are short, turnaround time is dominant and the link speed just doesn't make all that much difference.

Dick, K6KR

Sent from my iPad

On Mar 18, 2012, at 9:59 PM, "Richard Fjeld" <[hidden email]> wrote:

> I can't find it now, but someone posted something showing a screen capture with the latest P3 f/w and Utility running at 115,200 baud rate.
>  
> I'd like to know how they got the K3 to go that high?  Mine tops out at 38,400 using 4.39 f/w.
>  
>  
> Richard Fjeld, n0ce
> [hidden email]
> I'd rather be learning.
>  
>
>  
> __._,_.___
> Reply to sender | Reply to group | Reply via web post | Start a New Topic
> Messages in this topic (1)
> RECENT ACTIVITY: New Members 27 New Photos 1 New Files 1
> Visit Your Group
> Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use
> .
>  
> __,_._,___

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[k6dgw]

On 3/18/2012 9:59 PM, Richard Fjeld wrote:
> I can't find it now, but someone posted something showing a screen
> capture with the latest P3 f/w and Utility running at 115,200 baud
> rate.
>
> I'd like to know how they got the K3 to go that high?  Mine tops out
> at 38,400 using 4.39 f/w.

They didn't and likely won't, everyone's K3 maxes out at 38Kbps.  The
115Kbps is P3->PC only to improve the screen capture process.  Not all
PC serial ports [real or simulated] will work at that speed however.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2012 Cal QSO Party 6-7 Oct 2012
- www.cqp.org

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html