P4 on K2 Control board

[Steve Harpole, DDS.]

Page 17 in the K2 manual describes where to solder P4 , which is to the left of P5.  Are the Long pins inserted into the PCB board or are the short pins inserted like P5.  The manual , I think, does not describe this in detail.

Thanks,

Steve
KQ4UB
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-2]

Steve,

The short pins go into the PC board - that is THE normal way to mount them,
not only for Elecrarft kits but for many others as well.

73,
Don W3FPR

----- Original Message -----
Subject: [Elecraft] P4 on K2 Control board


Page 17 in the K2 manual describes where to solder P4 , which is to the left
of P5.  Are the Long pins inserted into the PCB board or are the short pins
inserted like P5.  The manual , I think, does not describe this in detail.



_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[G3VVT]

 
Steve,
 
My K2 manual rev F, January 29, 2004 is very specific. To quote:
 
"Install the 10 pin, dual row connector, P4 (to the left of P5). The short  
ends of the 10 pins are inserted into the board"
 
There is a misprint following which refers to P5 when believe it should be  
P4.
 
Regards,
Bob, G3VVT
K2 #4168

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com