PSK31
Locked
 
|
Greetings,
I am looking into getting started on PSK31 using the K2. I have the KPA-100 as well. I have read the WA7SPY app note and several items on the reflector. I have a basic question. Where can you get a connector to interface to the K2 microphone connector? No one seems to address that issue. Also, can you use the K2 Remote Control software to control the PTT for PSK31 or is there a PSK31 package out there that controls the K2? TNX & 73, Jim _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
Hi Jim:
If you are talking about the 8 pin plug for the K2 mic jack, check Radio Shack p/n 274-025. 73, Ken K3IU -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Elmore's Sent: Thursday, January 12, 2006 8:37 PM To: [hidden email] Subject: [Elecraft] PSK31 Greetings, I am looking into getting started on PSK31 using the K2. I have the KPA-100 as well. I have read the WA7SPY app note and several items on the reflector. I have a basic question. Where can you get a connector to interface to the K2 microphone connector? No one seems to address that issue. Also, can you use the K2 Remote Control software to control the PTT for PSK31 or is there a PSK31 package out there that controls the K2? TNX & 73, Jim _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
Ham Radio Deluxe controls the K2 and does PSK31, logbook, satellite
predictions, mapping etc very competently. Available free from http://hrd.ham-radio.ch/downloads.html > Also, can you use the K2 Remote Control software to control the PTT for >PSK31 or is there a PSK31 package out there that controls the K2? > > > > _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
In reply to this post by wa4ywm
Hi Jim -
I got the mike connector from my local Radio Shack...I think I had to ask for a Kenwood microphone connector. I use MixWin and set the K2 for VOX operation instead of PTT. I have the Heil Pro headset whose adapter has a nice jack for a mini plug for the microphone and a 1/4" jack for a foot switch. I just unplug the boom mike from the adaptor (not unplug the adaptor from the K2) and insert the audio plug from the soundcard in the PC. You could order just the adaptor from Heil prewired and use that. I think it was about $30. Tom K2TA ----- Original Message ----- From: "Elmore's" <[hidden email]> To: <[hidden email]> Sent: Thursday, January 12, 2006 8:37 PM Subject: [Elecraft] PSK31 > Greetings, > I am looking into getting started on PSK31 using the K2. I have the > KPA-100 as well. I have read the WA7SPY app note and several items on the > reflector. I have a basic question. Where can you get a connector to > interface to the K2 microphone connector? No one seems to address that > issue. > Also, can you use the K2 Remote Control software to control the PTT for > PSK31 or is there a PSK31 package out there that controls the K2? > > TNX & 73, Jim > > > _______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
In reply to this post by wa4ywm
Jim,
The 8 pin female mike connector that plugs into the K2 mike jack is readily available. You may even be able to get one from Radio Shack. MixW controls the K2 very nicely. You can change frequency, mode, filter settings, and it even controls PTT. Don't run the K2/100 over 30 watts; 20 watts and a fan is better. Set the power control high and control audio level to get the power. Turn off compression. You will need an external volume control or attenuator for audio from the sound card. 73, Chas, W1CG At 08:37 PM 1/12/2006, Elmore's wrote: >Greetings, > I am looking into getting started on PSK31 using the K2. I have > the KPA-100 as well. I have read the WA7SPY app note and several > items on the reflector. I have a basic question. Where can you get > a connector to interface to the K2 microphone connector? No one > seems to address that issue. > Also, can you use the K2 Remote Control software to control the > PTT for PSK31 or is there a PSK31 package out there that controls the K2? > >TNX & 73, Jim > >_______________________________________________ >Elecraft mailing list >Post to: [hidden email] >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): >http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |