[PX3] Reversed IQ on 2m?

[Edouard Lafargue]

  On the latest KX3/PX3 firmware, I just noticed that the IQ signal seems
to be reversed on the PX3 on 2m only - the symptom being that the higher
frequencies are displayed on the left of the screen, and the lower
frequencies on the right... Other bands behave correctly.

   I usually only direct tune on 2m, so I didn't notice this earlier. I did
a quick search on the mailing list archives and didn't find any reference
to this issue...

   Is this a known problem ?

Ed
W6ELA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Edouard Lafargue]

... and answering my own question: I just discovered you can invert
transverter bands in the PX3 settings... so it is merely a matter of
inverting the transverter bands that need it.

    Sorry for the disruption - hope this will help others who run into the
issue!

Ed
W6ELA

On Fri, Dec 4, 2015 at 8:43 AM, Edouard Lafargue <[hidden email]>
wrote:

>
>   On the latest KX3/PX3 firmware, I just noticed that the IQ signal seems
> to be reversed on the PX3 on 2m only - the symptom being that the higher
> frequencies are displayed on the left of the screen, and the lower
> frequencies on the right... Other bands behave correctly.
>
>    I usually only direct tune on 2m, so I didn't notice this earlier. I
> did a quick search on the mailing list archives and didn't find any
> reference to this issue...
>
>    Is this a known problem ?
>
> Ed
> W6ELA
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[JE0LFI]

Dear n6hz Paul

I have factory reset my PX3 with MENU+PWR.

REF and SCALE is OK, but waterfall hight is not saved.

In the auto text display mode on, and waterfall hight = 138,
When the mode return to LSB by changing to CW, waterfall
height will be back to 100.

I hope it is expected to be fixed in the next release.

Best regards,

nakamura / JE0LFI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]