Pomona 3296 Parts Source?

[Paul Clay]

Can't seem to find a source for the subject
BNC-binding post adapter for use with my KX1.  I
checked the Mouser website, but though they show
the item, they don't seem to stock it.  The only
other website I could find that sells this part
has a $60 minimum order for Pomona parts.  Any
recommended source(s)?

- Paul, n6lq
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Stephen W. Kercel]

Paul:

Supposing that you are not in a desperate hurry for the item, and you are
willing to trade a bit of lead time for money, I suggest that it would be
worthwhile for you to consider Mouser.

Of they carry an item as listed but unstocked, they are typically very good
about seeing that it gets delivered within a few days/weeks, even on
small-lot orders. My advice is to give them a call (you'll talk to a human
and not a computer) and see what they can do for you.

73,

Steve Kercel
AA4AK


At 12:06 PM 6/18/2005 -0700, you wrote:

>Can't seem to find a source for the subject
>BNC-binding post adapter for use with my KX1.  I
>checked the Mouser website, but though they show
>the item, they don't seem to stock it.  The only
>other website I could find that sells this part
>has a $60 minimum order for Pomona parts.  Any
>recommended source(s)?
>
>- Paul, n6lq
>_______________________________________________
>Elecraft mailing list
>Post to: [hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[n6wg]

Paul
Try JAMECO.  You can find them on the web.
Good luck and 73
Bob N6WG

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]]On Behalf Of Paul Clay
Sent: Saturday, June 18, 2005 12:07 PM
To: [hidden email]
Subject: [Elecraft] Pomona 3296 Parts Source?


Can't seem to find a source for the subject
BNC-binding post adapter for use with my KX1.  I
checked the Mouser website, but though they show
the item, they don't seem to stock it.  The only
other website I could find that sells this part
has a $60 minimum order for Pomona parts.  Any
recommended source(s)?

- Paul, n6lq
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Leigh L. Klotz Jr WA5ZNU]

The Pomona 1296 is much cheaper. That's what I use.  Try
http://froogle.google.com and they're all in the $10-$15 range.
Leigh / WA5ZNU

Paul Clay wrote:

>Can't seem to find a source for the subject
>BNC-binding post adapter for use with my KX1.  I
>checked the Mouser website, but though they show
>the item, they don't seem to stock it.  The only
>other website I could find that sells this part
>has a $60 minimum order for Pomona parts.  Any
>recommended source(s)?
>
>- Paul, n6lq
>_______________________________________________
>Elecraft mailing list
>Post to: [hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com
>  
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Bob Nielsen]

I found one at my nearest Fry's Electronics.  I recall that it was
around $8 or $9.

Bob, N7XY

On Sat, Jun 18, 2005 at 12:06:47PM -0700, Paul Clay wrote:
> Can't seem to find a source for the subject
> BNC-binding post adapter for use with my KX1.  I
> checked the Mouser website, but though they show
> the item, they don't seem to stock it.  The only
> other website I could find that sells this part
> has a $60 minimum order for Pomona parts.  Any
> recommended source(s)?
>
> - Paul, n6lq
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Matt and Kelly]

I just bought a Pomona 1296 from Allied Electronics, Inc. for $11.90 (over
the Internet).  Well worth the money.  And they had them in stock for
immediate shipment.

Matt - K7OE

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Paul Clay
Sent: Saturday, June 18, 2005 12:07 PM
To: [hidden email]
Subject: [Elecraft] Pomona 3296 Parts Source?

Can't seem to find a source for the subject
BNC-binding post adapter for use with my KX1.  I
checked the Mouser website, but though they show
the item, they don't seem to stock it.  The only
other website I could find that sells this part
has a $60 minimum order for Pomona parts.  Any
recommended source(s)?

- Paul, n6lq


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Rich Ardolino]

I bought a BNC to binding post adapter at a local Radio Shack.....maybe not as good quality as Pomona (brand), but good enough, mine works OK.

Rich   K2CPE
K2 #1102

-------------- Original message --------------

> Can't seem to find a source for the subject
> BNC-binding post .......................................
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Stuart Rohre]

The Pomona web site lists all the major distributors as stocking their
products:   Allied, Newark, Arrow, McMaster Carr, Powell, as well as Mouser.
Maybe not all stock every item, but Allied , Newark, and McMaster Carr are
usually widely stocking down here.
73
Stuart
K5KVH