Post to the group
Locked
 
|
Replies to posts should be to the group - NOT sent as private emails.
Private emails are not seen by the group, hence no one in the group can learn anything or hear what is being said on a particular subject. Bill W2BLC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Bill,
While I agree with you in general, there are occasions when the nitty gritty details are not of interest to the group. For instance, if I begin to help someone with a problem that gets into detailed measurements, that no longer is of interest to everyone, so I take it off-list. I leave it up to the discretion of the person with the problem to post whatever is the final resolution to the reflector. That sometimes happens, but sometimes does not. So, as long as I feel it is of general interest, I will post to the group, but if it is an individual question, I will go off-list. 73, Don W3FPR On 1/27/2013 8:52 PM, Bill Clarke wrote: > Replies to posts should be to the group - NOT sent as private emails. > Private emails are not seen by the group, hence no one in the group > can learn anything or hear what is being said on a particular subject. > > Bill W2BLC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
It would also be considerate it those that want to post critical comments, post direct and not to the group,And I know, sometimes it is read one way, meant another.I also will post to the group, if an answer is of broad interest, but the specifics will likely remain direct.There's no need for someone with a limited amount of time to sort through a whole stack of specifics.Oh oh... and tomorrow's Monday... great. and I only have half a weekend of work done...
Have a great day, --... ...-- Dale - WC7S in Wy > Bill, > > While I agree with you in general, there are occasions when the nitty > gritty details are not of interest to the group. > For instance, if I begin to help someone with a problem that gets into > detailed measurements, that no longer is of interest to everyone, so I > take it off-list. I leave it up to the discretion of the person with > the problem to post whatever is the final resolution to the reflector. > That sometimes happens, but sometimes does not. > > So, as long as I feel it is of general interest, I will post to the > group, but if it is an individual question, I will go off-list. > > 73, > Don W3FPR > On 1/27/2013 8:52 PM, Bill Clarke wrote: > > Replies to posts should be to the group - NOT sent as private emails. > > Private emails are not seen by the group, hence no one in the group > > can learn anything or hear what is being said on a particular subject. > > > > Bill W2BLC > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
That all depends on what is meant by "critical comments". Eric, the
list moderator does not tolerate insulting or demeaning comments posted either privately or publicly. All abuses should be reported to [hidden email]. Eric will handle those responses if needed. 73, Don W3FPR On 1/27/2013 11:12 PM, Dale Putnam wrote: > It would also be considerate it those that want to post critical comments, post direct and not to the group,And I know, sometimes it is read one way, meant another.I also will post to the group, if an answer is of broad interest, but the specifics will likely remain direct.There's no need for someone with a limited amount of time to sort through a whole stack of specifics.Oh oh... and tomorrow's Monday... great. and I only have half a weekend of work done... > > Have a great day, > > > --... ...-- > Dale - WC7S in Wy > > > > >> Bill, >> >> While I agree with you in general, there are occasions when the nitty >> gritty details are not of interest to the group. >> For instance, if I begin to help someone with a problem that gets into >> detailed measurements, that no longer is of interest to everyone, so I >> take it off-list. I leave it up to the discretion of the person with >> the problem to post whatever is the final resolution to the reflector. >> That sometimes happens, but sometimes does not. >> >> So, as long as I feel it is of general interest, I will post to the >> group, but if it is an individual question, I will go off-list. >> >> 73, >> Don W3FPR >> On 1/27/2013 8:52 PM, Bill Clarke wrote: >>> Replies to posts should be to the group - NOT sent as private emails. >>> Private emails are not seen by the group, hence no one in the group >>> can learn anything or hear what is being said on a particular subject. >>> >>> Bill W2BLC >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Don Wilhelm-4
I would say that is a common sense approach to the issue.
Fred/N0AZZ -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Don Wilhelm Sent: Sunday, January 27, 2013 8:09 PM To: [hidden email] Subject: Re: [Elecraft] Post to the group Bill, While I agree with you in general, there are occasions when the nitty gritty details are not of interest to the group. For instance, if I begin to help someone with a problem that gets into detailed measurements, that no longer is of interest to everyone, so I take it off-list. I leave it up to the discretion of the person with the problem to post whatever is the final resolution to the reflector. That sometimes happens, but sometimes does not. So, as long as I feel it is of general interest, I will post to the group, but if it is an individual question, I will go off-list. 73, Don W3FPR On 1/27/2013 8:52 PM, Bill Clarke wrote: > Replies to posts should be to the group - NOT sent as private emails. > Private emails are not seen by the group, hence no one in the group > can learn anything or hear what is being said on a particular subject. > > Bill W2BLC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Bill Clarke
OK Bill, here is a group posting.
Posting to the group here runs the risk of frequent and protracted flames. Thus, I often post to individuals instead. 73 de Brian/K3KO On 1/27/2013 8:52 PM, Bill Clarke wrote: > Replies to posts should be to the group - NOT sent as private emails. > Private emails are not seen by the group, hence no one in the group > can learn anything or hear what is being said on a particular subject. > > Bill W2BLC > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2012.0.2221 / Virus Database: 2639/5561 - Release Date: 01/27/13 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Has anyone tried the KX3 both with and without the KXFL3?
The manual says it results in a "significant performance improvement in rejecting extremely strong interfering signals that are just a few kHz away from the received signal." I wonder if it's possible to quantify that? 73 Geoff G3UCK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by alsopb
Yup I know about that.
Fred/N0AZZ -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of briana Sent: Monday, January 28, 2013 6:40 AM To: [hidden email] Subject: Re: [Elecraft] Post to the group OK Bill, here is a group posting. Posting to the group here runs the risk of frequent and protracted flames. Thus, I often post to individuals instead. 73 de Brian/K3KO On 1/27/2013 8:52 PM, Bill Clarke wrote: > Replies to posts should be to the group - NOT sent as private emails. > Private emails are not seen by the group, hence no one in the group > can learn anything or hear what is being said on a particular subject. > > Bill W2BLC > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2012.0.2221 / Virus Database: 2639/5561 - Release Date: > 01/27/13 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by alsopb
Although "Me Toos" are discouraged.
Me Too! Also cuts down on the chest beating emails! 73 George AI4VZ -----Original Message----- From: briana Posting to the group here runs the risk of frequent and protracted flames. Thus, I often post to individuals instead. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Geoffrey Downs-3
Thanks Walter. I had forgotten that Rob Sherwood had tested it. Interesting.
The dynamic range looks pretty good compared with other rigs even without the KXFL3. I don't have enough technical background to understand the significance of footnote v, though. Perhaps some knowledgeable person could explain? Would anyone who has a KX3 without a KXFL3 care to comment on their experience? 73 Geoff G3UCK -----Original Message----- From: Walter Underwood Yes, it is possible to quantify it. See the measurements with and without the roofing filter here (you'll need to check the footnotes): http://www.sherweng.com/table.html wunder K6WRU On Jan 28, 2013, at 5:11 AM, Geoffrey Downs wrote: > Has anyone tried the KX3 both with and without the KXFL3? > > The manual says it results in a "significant > performance improvement in rejecting extremely strong interfering signals > that are just a few kHz away from > the received signal." > > I wonder if it's possible to quantify that? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Bill Clarke
On Sun, 27 Jan 2013 20:52:29 -0500, Bill Clarke wrote:
> Replies to posts should be to the group - NOT sent as private emails. > Private emails are not seen by the group, hence no one in the group can > learn anything or hear what is being said on a particular subject. Absolutely. Apparently those words fall on deaf ears, even when directed to those who control it. This is the only group (of many) that I belong to that does this, and it is very inconvenient and rude to the rest of the group. Many more key presses/mouse clicks to change the addr to the group in my mailer. Gary P.S. This is the first posting that I've actually thought to change the address on without first letting it go only to the OP by mistake. -- Web: http://ag0n.net NodeOp Page: http://ag0n.net/irlp Node 3055: http://ag0n.net/irlp/3055 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by alsopb
I belong to the school of thought that the reason we have these
lists/groups is to share information and solutions to problems. For that reason, I have all of the lists/groups that I administer/own set so that replies go to the group. Obviously, there are exceptions. For example, replies to FS/FT solicitations should go to the individual concerned. Bur if someone asks a question, just like in school, there is probably at least one other person who has the same question, so sharing is a good thing. 73 de Jim - AD6CW ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by alsopb
I don't agree with that -- I think the moderator(s) keep attacks to a
minimum, if that's what you mean by "flames". Some people think a "flame" is a difference of opinion. I don't think that's the case -- this is a discussion group -- people discuss. Beyond that, I don't mind if people go "off list", but I hope most universally interesting stuff stays on the list. 73- Nick, WA5BDU -- no "flame" intended. On 1/28/2013 6:40 AM, briana wrote: > OK Bill, here is a group posting. > > Posting to the group here runs the risk of frequent and protracted > flames. Thus, I often post to individuals instead. > > 73 de Brian/K3KO > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
Administrator
|
We encourage vigorous debate, right up to (but hopefully not
including) the point where it gets out of hand. Ideas are floated, supported or critiqued, then perhaps incorporated into current or future products. Thanks, everyone, for keeping the list [relatively] civilized. Wayne N6KR On Jan 28, 2013, at 7:48 PM, Nick-WA5BDU wrote: > I don't agree with that -- I think the moderator(s) keep attacks to > a minimum, if that's what you mean by "flames". > > Some people think a "flame" is a difference of opinion. I don't > think that's the case -- this is a discussion group -- people discuss. > > Beyond that, I don't mind if people go "off list", but I hope most > universally interesting stuff stays on the list. > > 73- > > Nick, WA5BDU > > -- no "flame" intended. > > On 1/28/2013 6:40 AM, briana wrote: >> OK Bill, here is a group posting. >> >> Posting to the group here runs the risk of frequent and protracted >> flames. Thus, I often post to individuals instead. >> >> 73 de Brian/K3KO >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |