Power pins on P3

[Richard W Hemingway]

Hi,
I am wondering which of the pins I should use to allow the P3 turn on when the K3s is turned on: Power Control Pins 2 & 3 or Pins 1 & 2, (where the Power switch is disabled).Thanks, Dick, N5XRD 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Chester Alderman]

Dick,

In the manuals that came with your K3 and P3, there are explanations on how to do this. You don't need to add anything!

Tom - W4BQF


-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Richard W Hemingway
Sent: Saturday, April 16, 2016 12:08 PM
To: Elecraft Reflector
Subject: [Elecraft] Power pins on P3

Hi,
I am wondering which of the pins I should use to allow the P3 turn on when the K3s is turned on: Power Control Pins 2 & 3 or Pins 1 & 2, (where the Power switch is disabled).Thanks, Dick, N5XRD ______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Nr4c]

Download the manual.

Sent from my iPhone
...nr4c. bill

> On Apr 16, 2016, at 12:07 PM, Richard W Hemingway <[hidden email]> wrote:
>
> Hi,
> I am wondering which of the pins I should use to allow the P3 turn on when the K3s is turned on: Power Control Pins 2 & 3 or Pins 1 & 2, (where the Power switch is disabled).Thanks, Dick, N5XRD
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[ke9uw]

I jumper 2 and 3. You can still turn off the P3 if desired but when power is applied from the K3 or elsewhere, the P3 automatically turns on. Best of both.