Proper Heil Microphone Adapter?

[Jeffrey Maass]

I have three Heil headsets, each with the HC4 element. These are *not* the Icom "iC"
versions.

Which is the correct Heil adapter for the front panel connector? Kenwood?

I've been sorting through the archives, and have not found a clear answer.


73,   Jeff  K8ND
 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[raroth7]

Jeff Maass wrote:

> I have three Heil headsets, each with the HC4 element. These are *not* the Icom "iC"
> versions.
>
> Which is the correct Heil adapter for the front panel connector? Kenwood?
>
> I've been sorting through the archives, and have not found a clear answer.
>
>
> 73,   Jeff  K8ND
>  
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

Yes...Kenwood.  Since you are using dynamic mic elements you don't have
to be concerned about bias voltage pin-outs.

Happy Holidays!


--
73,
Dick ka1oz
Middleborough, MA

Radio:  Elecraft K3/100(Kit) SN 859
Antenna:  Titan-DX
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-4]

Jeff,

Use the Kenwood adapter - or plug the headset directly into the rear
panel jacks.

73,
Don W3FPR

Jeff Maass wrote:

> I have three Heil headsets, each with the HC4 element. These are *not* the Icom "iC"
> versions.
>
> Which is the correct Heil adapter for the front panel connector? Kenwood?
>
> I've been sorting through the archives, and have not found a clear answer.
>
>
> 73,   Jeff  K8ND
>  
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Jeffrey Maass]

Thanks to all who replied!

Happy Holidays and 73,

Jeff  K8ND
 

> -----Original Message-----
> From: Don Wilhelm [mailto:[hidden email]]
> Sent: Wednesday, December 24, 2008 6:40 AM
> To: [hidden email]
> Cc: [hidden email]
> Subject: Re: [Elecraft] Proper Heil Microphone Adapter?
>
> Jeff,
>
> Use the Kenwood adapter - or plug the headset directly into
> the rear panel jacks.
>
> 73,
> Don W3FPR
>
> Jeff Maass wrote:
> > I have three Heil headsets, each with the HC4 element.
> These are *not* the Icom "iC"
> > versions.
> >
> > Which is the correct Heil adapter for the front panel
> connector? Kenwood?
> >

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com