RTTY questions

[Dale Long]

I am having trouble getting started in RTTY.  Am using AFSK and N1MM with MTTY.

In the RTTY Engine it appears that I am transmitting, but there is no output.  Last night I went through all the K3 config parameters, and still no luck.

There were a few times that I noticed an "Overload" error message...Another thing is that in the TX tab of the setup, it will not recognize my COM port.  Thats probably because it is in use. The problem may be a N1MM setup issue.  In the Configur Ports tab, what ports do I need to assign in addition to the radio?

Thanks

Dale CX/N3BNA


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dale Long]

I found a problem with  audio output from computer and am transmitting on 15m...But no QSO, so not sure if it will work.  Thanks

dale

--- On Thu, 3/4/10, DALE LONG <[hidden email]> wrote:

From: DALE LONG <[hidden email]>
Subject: [Elecraft] RTTY questions
To: [hidden email]
Date: Thursday, March 4, 2010, 8:05 AM

I am having trouble getting started in RTTY.  Am using AFSK and N1MM with MTTY.

In the RTTY Engine it appears that I am transmitting, but there is no output.  Last night I went through all the K3 config parameters, and still no luck.

There were a few times that I noticed an "Overload" error message...Another thing is that in the TX tab of the setup, it will not recognize my COM port.  Thats probably because it is in use. The problem may be a N1MM setup issue.  In the Configur Ports tab, what ports do I need to assign in addition to the radio?

Thanks

Dale CX/N3BNA


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dale Long]

Our K3 seems to have full output on 10/15 and 20m. 

70 watts on 40m
60 watts on 80m
40 watts on 160m.

This does not seem to be related to antenna SWR, so must be a setting of some kind.  All tests were done on CW mode

Thanks

Dale CX/N3BNA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Dale,

Please substantiate that it is not antenna related by doing the same
test into a dummy load with the KAT3 in bypass.

73,
Don W3FPR

DALE LONG wrote:

> Our K3 seems to have full output on 10/15 and 20m.  
>
> 70 watts on 40m
> 60 watts on 80m
> 40 watts on 160m.
>
> This does not seem to be related to antenna SWR, so must be a setting of some kind.  All tests were done on CW mode
>
> Thanks
>
> Dale CX/N3BNA
>  
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html