Hi Mark,
That connector (looks like an RJ11) is an accessory connector that isn't used for anything at the moment. Perhaps the guys at Aptos use it for diagnostics? James K2QI That connector ------Original Message------ From: Mark Goecke Sender: [hidden email] To: Elecraft Reflector Subject: [Elecraft] Connector on bottom right side of the fmain front panelboard? Sent: Nov 17, 2010 08:12 In the pictures of the K3 boards, for the front panel board, there is a connector on the right side of the board that faces downward, through a cutout in the front cover. It looks like a Cat 5 Ethernet connector. I have not been able to find anything in the documentation that describes what this connector is for. Have I overlooked it? Can someone please tell me what that connector is for? TNX Mark KC5VF ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Sent via BlackBerry from T-Mobile ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
--... ...-- -.. . .--- .- -- . ...
|
Quoting [hidden email]: > Hi Mark, > > That connector (looks like an RJ11) is an accessory connector that > isn't used for anything at the moment. Perhaps the guys at Aptos use > it for diagnostics? > > James K2QI > That connector > ------Original Message------ > From: Mark Goecke > Sender: [hidden email] > To: Elecraft Reflector > Subject: [Elecraft] Connector on bottom right side of the fmain > front panelboard? > Sent: Nov 17, 2010 08:12 > > In the pictures of the K3 boards, for the front panel board, there is a > connector on the right side of the board that faces downward, through a > cutout in the front cover. It looks like a Cat 5 Ethernet connector. I > have not been able to find anything in the documentation that describes what > this connector is for. Have I overlooked it? Can someone please tell me > what that connector is for? > > TNX > > Mark KC5VF > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > Sent via BlackBerry from T-Mobile > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by K2QI
Quoting [hidden email]: > Hi Mark, > > That connector (looks like an RJ11) is an accessory connector that > isn't used for anything at the moment. Perhaps the guys at Aptos use > it for diagnostics? > > James K2QI > That connector > ------Original Message------ > From: Mark Goecke > Sender: [hidden email] > To: Elecraft Reflector > Subject: [Elecraft] Connector on bottom right side of the fmain > front panelboard? > Sent: Nov 17, 2010 08:12 > > In the pictures of the K3 boards, for the front panel board, there is a > connector on the right side of the board that faces downward, through a > cutout in the front cover. It looks like a Cat 5 Ethernet connector. I > have not been able to find anything in the documentation that describes what > this connector is for. Have I overlooked it? Can someone please tell me > what that connector is for? > > TNX > > Mark KC5VF > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > Sent via BlackBerry from T-Mobile > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by K2QI
It's a 6 lead version of the modular connector. There is one on the P3
front panel as well. I think it might be a test port for the panel assembly. sure would be nice for a mic or a separate panel to use fo mobile installation. ,,,bc nr4c Quoting [hidden email]: > Hi Mark, > > That connector (looks like an RJ11) is an accessory connector that > isn't used for anything at the moment. Perhaps the guys at Aptos use > it for diagnostics? > > James K2QI > That connector > ------Original Message------ > From: Mark Goecke > Sender: [hidden email] > To: Elecraft Reflector > Subject: [Elecraft] Connector on bottom right side of the fmain > front panelboard? > Sent: Nov 17, 2010 08:12 > > In the pictures of the K3 boards, for the front panel board, there is a > connector on the right side of the board that faces downward, through a > cutout in the front cover. It looks like a Cat 5 Ethernet connector. I > have not been able to find anything in the documentation that describes what > this connector is for. Have I overlooked it? Can someone please tell me > what that connector is for? > > TNX > > Mark KC5VF > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > Sent via BlackBerry from T-Mobile > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Free forum by Nabble | Edit this page |