Elecraft

Re: K2 IF output

Classic

List

Threaded

19 messages Options

Ken G Kopp

Re: K2 IF output

Who makes a Clifton Labs Z1000B replacement for the K2?

On Feb 13, 2017 07:46, "Don Wilhelm" <[hidden email]> wrote:

> Ken,
>
> Sorry, but I do not.
> There is a ham in England who produces a buffer amplifier that can be
> used, but I cannot recall who.
> If you ask on the reflector for a Clifton Labs Z10000B replacement, you
> may get some hits.
>
> 73,
> Don W3FPR
>
> On 2/13/2017 9:20 AM, Ken G Kopp wrote:
>
>> GM Don!
>>
>> Can / do you supply the IF output circuit for the K2?
>>
>> 73
>>
>> Ken - K0PP
>>
>> On Feb 13, 2017 07:15, "Don Wilhelm [hidden email] <mailto:
>> [hidden email]> [KX3]" <[hidden email] <mailto:
>> [hidden email]>> wrote:
>>
>> Bob,
>>
>> Check out the Win4K3 software (http://va2fsq.com/spectrum-scopes/
>> <http://va2fsq.com/spectrum-scopes/>). It
>> has support for the KX2 which allows the use of SDRPlay to produce a
>> panadapter display.
>>
>> 73,
>> Don W3FPR
>>
>>
>>
>> On 2/13/2017 8:29 AM, [hidden email]
>> <mailto:[hidden email]> [KX3] wrote:
>> >
>> >
>> > So the question is - Has anyone been able to put together a viable
>> > support system for signal analysis (aka - Panadapter?) that can
>> be used
>> > directly with the KX2?
>> >
>> __._,_.___
>> ------------------------------------------------------------
>> ------------
>> Posted by: Don Wilhelm <[hidden email]
>> <mailto:[hidden email]>>
>> ------------------------------------------------------------
>> ------------
>> Reply via web post
>> <https://groups.yahoo.com/neo/groups/KX3/conversations/messa
>> ges/61168;_ylc=X3oDMTJybnBybGFwBF9TAzk3MzU5NzE0BGdycElkAzc0N
>> TIwOTQ3BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM2MTE2OARzZWMDZnRyB
>> HNsawNycGx5BHN0aW1lAzE0ODY5OTUzMTE-?act=reply&messageNum=61168>
>> • Reply to sender
>> <mailto:[hidden email]?subject=Re%3A%20%5BKX3%5D%20K
>> X2%20Spectrum%20Software%3F>
>> • Reply to group
>> <mailto:[hidden email]?subject=Re%3A%20%5BKX3%5D%20KX2%
>> 20Spectrum%20Software%3F>
>> • Start a New Topic
>> <https://groups.yahoo.com/neo/groups/KX3/conversations/newto
>> pic;_ylc=X3oDMTJmOGxubG1hBF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ
>> 3BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNudHBjBHN0aW1lAzE0ODY5OTUzMTE-
>> >
>> • Messages in this topic
>> <https://groups.yahoo.com/neo/groups/KX3/conversations/topic
>> s/61167;_ylc=X3oDMTM3NW9wZzloBF9TAzk3MzU5NzE0BGdycElkAzc0NTI
>> wOTQ3BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM2MTE2OARzZWMDZnRyBHN
>> sawN2dHBjBHN0aW1lAzE0ODY5OTUzMTEEdHBjSWQDNjExNjc->
>> (2)
>>
>> ------------------------------------------------------------
>> ------------
>> Have you tried the highest rated email app? <https://yho.com/1wwmgg>
>> With 4.5 stars in iTunes, the Yahoo Mail app is the highest rated
>> email app on the market. What are you waiting for? Now you can
>> access all your inboxes (Gmail, Outlook, AOL and more) in one
>> place. Never delete an email again with 1000GB of free cloud storage.
>> ------------------------------------------------------------
>> ------------
>> Visit Your Group
>> <https://groups.yahoo.com/neo/groups/KX3/info;_ylc=X3oDMTJma
>> mppbnVuBF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ3BGdycHNwSWQDMTcwN
>> TA2MzEwOARzZWMDdnRsBHNsawN2Z2hwBHN0aW1lAzE0ODY5OTUzMTE->
>>
>>
>> * New Members
>> <https://groups.yahoo.com/neo/groups/KX3/members/all;_ylc=X3
>> oDMTJnaWxsbTY2BF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ3BGdycHNwSW
>> QDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2bWJycwRzdGltZQMxNDg2OTk1MzEx>
>> 11
>> * New Photos
>> <https://groups.yahoo.com/neo/groups/KX3/photos/photostream;
>> _ylc=X3oDMTJnaWdyN21hBF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ3BGd
>> ycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2cGhvdARzdGltZQMxNDg2OTk1MzEx>
>> 1
>>
>> Yahoo! Groups
>> <https://groups.yahoo.com/neo;_ylc=X3oDMTJlNGxkaWt0BF9TAzk3M
>> zU5NzE0BGdycElkAzc0NTIwOTQ3BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZ
>> nRyBHNsawNnZnAEc3RpbWUDMTQ4Njk5NTMxMQ-->
>>
>> • Privacy
>> <https://info.yahoo.com/privacy/us/yahoo/groups/details.html> •
>> Unsubscribe
>> <mailto:[hidden email]?subject=Unsubscribe> •
>> Terms of Use <https://info.yahoo.com/legal/us/yahoo/utos/terms/>
>>
>> .
>>
>> __,_._,___
>>
>>
>>
>

Heinz Baertschi

Re: K2 IF output

That would be an option:

IF Adapter full kit (SMD components):
http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapter

IF Adapter kit (all SMD components soldered):
http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapterBestückt

73, Heinz HB9BCB

> Am 13.02.2017 um 18:43 schrieb Ken G Kopp <[hidden email]>:
>
> Who makes a Clifton Labs Z1000B replacement for the K2?
>
>> On Feb 13, 2017 07:46, "Don Wilhelm" <[hidden email]> wrote:
>>
>> Ken,
>>
>> Sorry, but I do not.
>> There is a ham in England who produces a buffer amplifier that can be
>> used, but I cannot recall who.
>> If you ask on the reflector for a Clifton Labs Z10000B replacement, you
>> may get some hits.
>>
>> 73,
>> Don W3FPR
>>>

Ken Chandler

Re: K2 IF output

In reply to this post by Ken G Kopp

Contact G4HUP who makes various kits, I've one here.
See
http://G4hup.com.
The work is first class.

Ken.. G0ORH

Sent from my iPad

> On 13 Feb 2017, at 17:43, Ken G Kopp <[hidden email]> wrote:
>
> Who makes a Clifton Labs Z1000B replacement for the K2?
>
>> On Feb 13, 2017 07:46, "Don Wilhelm" <[hidden email]> wrote:
>>
>> Ken,
>>
>> Sorry, but I do not.
>> There is a ham in England who produces a buffer amplifier that can be
>> used, but I cannot recall who.
>> If you ask on the reflector for a Clifton Labs Z10000B replacement, you
>> may get some hits.
>>
>> 73,
>> Don W3FPR
>>
>>> On 2/13/2017 9:20 AM, Ken G Kopp wrote:
>>>
>>> GM Don!
>>>
>>> Can / do you supply the IF output circuit for the K2?
>>>
>>> 73
>>>
>>> Ken - K0PP
>>>
>>> On Feb 13, 2017 07:15, "Don Wilhelm [hidden email] <mailto:
>>> [hidden email]> [KX3]" <[hidden email] <mailto:
>>> [hidden email]>> wrote:
>>>
>>> Bob,
>>>
>>> Check out the Win4K3 software (http://va2fsq.com/spectrum-scopes/
>>> <http://va2fsq.com/spectrum-scopes/>). It
>>> has support for the KX2 which allows the use of SDRPlay to produce a
>>> panadapter display.
>>>
>>> 73,
>>> Don W3FPR
>>>
>>>
>>>
>>> On 2/13/2017 8:29 AM, [hidden email]
>>> <mailto:[hidden email]> [KX3] wrote:
>>>>
>>>>
>>>> So the question is - Has anyone been able to put together a viable
>>>> support system for signal analysis (aka - Panadapter?) that can
>>> be used
>>>> directly with the KX2?
>>>>
>>> __._,_.___
>>> ------------------------------------------------------------
>>> ------------
>>> Posted by: Don Wilhelm <[hidden email]
>>> <mailto:[hidden email]>>
>>> ------------------------------------------------------------
>>> ------------
>>> Reply via web post
>>> <https://groups.yahoo.com/neo/groups/KX3/conversations/messa
>>> ges/61168;_ylc=X3oDMTJybnBybGFwBF9TAzk3MzU5NzE0BGdycElkAzc0N
>>> TIwOTQ3BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM2MTE2OARzZWMDZnRyB
>>> HNsawNycGx5BHN0aW1lAzE0ODY5OTUzMTE-?act=reply&messageNum=61168>
>>> • Reply to sender
>>> <mailto:[hidden email]?subject=Re%3A%20%5BKX3%5D%20K
>>> X2%20Spectrum%20Software%3F>
>>> • Reply to group
>>> <mailto:[hidden email]?subject=Re%3A%20%5BKX3%5D%20KX2%
>>> 20Spectrum%20Software%3F>
>>> • Start a New Topic
>>> <https://groups.yahoo.com/neo/groups/KX3/conversations/newto
>>> pic;_ylc=X3oDMTJmOGxubG1hBF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ
>>> 3BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNudHBjBHN0aW1lAzE0ODY5OTUzMTE-
>>>>
>>> • Messages in this topic
>>> <https://groups.yahoo.com/neo/groups/KX3/conversations/topic
>>> s/61167;_ylc=X3oDMTM3NW9wZzloBF9TAzk3MzU5NzE0BGdycElkAzc0NTI
>>> wOTQ3BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM2MTE2OARzZWMDZnRyBHN
>>> sawN2dHBjBHN0aW1lAzE0ODY5OTUzMTEEdHBjSWQDNjExNjc->
>>> (2)
>>>
>>> ------------------------------------------------------------
>>> ------------
>>> Have you tried the highest rated email app? <https://yho.com/1wwmgg>
>>> With 4.5 stars in iTunes, the Yahoo Mail app is the highest rated
>>> email app on the market. What are you waiting for? Now you can
>>> access all your inboxes (Gmail, Outlook, AOL and more) in one
>>> place. Never delete an email again with 1000GB of free cloud storage.
>>> ------------------------------------------------------------
>>> ------------
>>> Visit Your Group
>>> <https://groups.yahoo.com/neo/groups/KX3/info;_ylc=X3oDMTJma
>>> mppbnVuBF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ3BGdycHNwSWQDMTcwN
>>> TA2MzEwOARzZWMDdnRsBHNsawN2Z2hwBHN0aW1lAzE0ODY5OTUzMTE->
>>>
>>>
>>> * New Members
>>> <https://groups.yahoo.com/neo/groups/KX3/members/all;_ylc=X3
>>> oDMTJnaWxsbTY2BF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ3BGdycHNwSW
>>> QDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2bWJycwRzdGltZQMxNDg2OTk1MzEx>
>>> 11
>>> * New Photos
>>> <https://groups.yahoo.com/neo/groups/KX3/photos/photostream;
>>> _ylc=X3oDMTJnaWdyN21hBF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ3BGd
>>> ycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2cGhvdARzdGltZQMxNDg2OTk1MzEx>
>>> 1
>>>
>>> Yahoo! Groups
>>> <https://groups.yahoo.com/neo;_ylc=X3oDMTJlNGxkaWt0BF9TAzk3M
>>> zU5NzE0BGdycElkAzc0NTIwOTQ3BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZ
>>> nRyBHNsawNnZnAEc3RpbWUDMTQ4Njk5NTMxMQ-->
>>>
>>> • Privacy
>>> <https://info.yahoo.com/privacy/us/yahoo/groups/details.html> •
>>> Unsubscribe
>>> <mailto:[hidden email]?subject=Unsubscribe> •
>>> Terms of Use <https://info.yahoo.com/legal/us/yahoo/utos/terms/>
>>>
>>> .
>>>
>>> __,_._,___
>>>
>>>
>>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

donovanf

Re: K2 IF output

G4HUP is a silent key.... RIP

----- Original Message -----

From: "Ken Chandler" <[hidden email]>
To: "Ken G Kopp" <[hidden email]>
Cc: [hidden email]
Sent: Monday, February 13, 2017 7:02:47 PM
Subject: Re: [Elecraft] K2 IF output

Contact G4HUP who makes various kits, I've one here.
See
http://G4hup.com.
The work is first class.

Ken.. G0ORH

Sent from my iPad

Jack F6AJW

Re: K2 IF output

In reply to this post by Ken Chandler

Sadly, Dave G4HUP is now SK .

73's.

Jacques F6AJW

Le 13/02/2017 à 20:02, Ken Chandler a écrit :

> Contact G4HUP who makes various kits, I've one here.
> See
> http://G4hup.com.
> The work is first class.
>
> Ken.. G0ORH
>
> Sent from my iPad
>
>
>> On 13 Feb 2017, at 17:43, Ken G Kopp <[hidden email]> wrote:
>>
>> Who makes a Clifton Labs Z1000B replacement for the K2?
>>
>>> On Feb 13, 2017 07:46, "Don Wilhelm" <[hidden email]> wrote:
>>>
>>> Ken,
>>>
>>> Sorry, but I do not.
>>> There is a ham in England who produces a buffer amplifier that can be
>>> used, but I cannot recall who.
>>> If you ask on the reflector for a Clifton Labs Z10000B replacement, you
>>> may get some hits.
>>>
>>> 73,
>>> Don W3FPR
>>>
>>>> On 2/13/2017 9:20 AM, Ken G Kopp wrote:
>>>>
>>>> GM Don!
>>>>
>>>> Can / do you supply the IF output circuit for the K2?
>>>>
>>>> 73
>>>>
>>>> Ken - K0PP
>>>>
>>>> On Feb 13, 2017 07:15, "Don Wilhelm [hidden email] <mailto:
>>>> [hidden email]> [KX3]" <[hidden email] <mailto:
>>>> [hidden email]>> wrote:
>>>>
>>>> Bob,
>>>>
>>>> Check out the Win4K3 software (http://va2fsq.com/spectrum-scopes/
>>>> <http://va2fsq.com/spectrum-scopes/>). It
>>>> has support for the KX2 which allows the use of SDRPlay to produce a
>>>> panadapter display.
>>>>
>>>> 73,
>>>> Don W3FPR
>>>>
>>>>
>>>>
>>>> On 2/13/2017 8:29 AM, [hidden email]
>>>> <mailto:[hidden email]> [KX3] wrote:
>>>>>
>>>>> So the question is - Has anyone been able to put together a viable
>>>>> support system for signal analysis (aka - Panadapter?) that can
>>>> be used
>>>>> directly with the KX2?
>>>>>
>>>> __._,_.___
>>>> ------------------------------------------------------------
>>>> ------------
>>>> Posted by: Don Wilhelm <[hidden email]
>>>> <mailto:[hidden email]>>
>>>> ------------------------------------------------------------
>>>> ------------
>>>> Reply via web post
>>>> <https://groups.yahoo.com/neo/groups/KX3/conversations/messa
>>>> ges/61168;_ylc=X3oDMTJybnBybGFwBF9TAzk3MzU5NzE0BGdycElkAzc0N
>>>> TIwOTQ3BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM2MTE2OARzZWMDZnRyB
>>>> HNsawNycGx5BHN0aW1lAzE0ODY5OTUzMTE-?act=reply&messageNum=61168>
>>>> • Reply to sender
>>>> <mailto:[hidden email]?subject=Re%3A%20%5BKX3%5D%20K
>>>> X2%20Spectrum%20Software%3F>
>>>> • Reply to group
>>>> <mailto:[hidden email]?subject=Re%3A%20%5BKX3%5D%20KX2%
>>>> 20Spectrum%20Software%3F>
>>>> • Start a New Topic
>>>> <https://groups.yahoo.com/neo/groups/KX3/conversations/newto
>>>> pic;_ylc=X3oDMTJmOGxubG1hBF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ
>>>> 3BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNudHBjBHN0aW1lAzE0ODY5OTUzMTE-
>>>> • Messages in this topic
>>>> <https://groups.yahoo.com/neo/groups/KX3/conversations/topic
>>>> s/61167;_ylc=X3oDMTM3NW9wZzloBF9TAzk3MzU5NzE0BGdycElkAzc0NTI
>>>> wOTQ3BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM2MTE2OARzZWMDZnRyBHN
>>>> sawN2dHBjBHN0aW1lAzE0ODY5OTUzMTEEdHBjSWQDNjExNjc->
>>>> (2)
>>>>
>>>> ------------------------------------------------------------
>>>> ------------
>>>> Have you tried the highest rated email app? <https://yho.com/1wwmgg>
>>>> With 4.5 stars in iTunes, the Yahoo Mail app is the highest rated
>>>> email app on the market. What are you waiting for? Now you can
>>>> access all your inboxes (Gmail, Outlook, AOL and more) in one
>>>> place. Never delete an email again with 1000GB of free cloud storage.
>>>> ------------------------------------------------------------
>>>> ------------
>>>> Visit Your Group
>>>> <https://groups.yahoo.com/neo/groups/KX3/info;_ylc=X3oDMTJma
>>>> mppbnVuBF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ3BGdycHNwSWQDMTcwN
>>>> TA2MzEwOARzZWMDdnRsBHNsawN2Z2hwBHN0aW1lAzE0ODY5OTUzMTE->
>>>>
>>>>
>>>> * New Members
>>>> <https://groups.yahoo.com/neo/groups/KX3/members/all;_ylc=X3
>>>> oDMTJnaWxsbTY2BF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ3BGdycHNwSW
>>>> QDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2bWJycwRzdGltZQMxNDg2OTk1MzEx>
>>>> 11
>>>> * New Photos
>>>> <https://groups.yahoo.com/neo/groups/KX3/photos/photostream;
>>>> _ylc=X3oDMTJnaWdyN21hBF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ3BGd
>>>> ycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2cGhvdARzdGltZQMxNDg2OTk1MzEx>
>>>> 1
>>>>
>>>> Yahoo! Groups
>>>> <https://groups.yahoo.com/neo;_ylc=X3oDMTJlNGxkaWt0BF9TAzk3M
>>>> zU5NzE0BGdycElkAzc0NTIwOTQ3BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZ
>>>> nRyBHNsawNnZnAEc3RpbWUDMTQ4Njk5NTMxMQ-->
>>>>
>>>> • Privacy
>>>> <https://info.yahoo.com/privacy/us/yahoo/groups/details.html> •
>>>> Unsubscribe
>>>> <mailto:[hidden email]?subject=Unsubscribe> •
>>>> Terms of Use <https://info.yahoo.com/legal/us/yahoo/utos/terms/>
>>>>
>>>> .
>>>>
>>>> __,_._,___
>>>>
>>>>
>>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Elecraft mailing list

Re: K2 IF output

In reply to this post by Ken Chandler

Ken,

Sorry to be the bearer of bad news, but G4HUP died last week at the age of 68, a great loss to the community.

We have no word on the future, if any, of his excellent products.

73 from David GM4JJJ

> On 13 Feb 2017, at 19:02, Ken Chandler <[hidden email]> wrote:
>
> Contact G4HUP who makes various kits, I've one here.
> See
> http://G4hup.com.
> The work is first class.
>
> Ken.. G0ORH
>
> Sent from my iPad
>
>
>> On 13 Feb 2017, at 17:43, Ken G Kopp <[hidden email]> wrote:
>>
>> Who makes a Clifton Labs Z1000B replacement for the K2?
>>
>>> On Feb 13, 2017 07:46, "Don Wilhelm" <[hidden email]> wrote:
>>>
>>> Ken,
>>>
>>> Sorry, but I do not.
>>> There is a ham in England who produces a buffer amplifier that can be
>>> used, but I cannot recall who.
>>> If you ask on the reflector for a Clifton Labs Z10000B replacement, you
>>> may get some hits.
>>>
>>> 73,
>>> Don W3FPR
>>>
>>>> On 2/13/2017 9:20 AM, Ken G Kopp wrote:
>>>>
>>>> GM Don!
>>>>
>>>> Can / do you supply the IF output circuit for the K2?
>>>>
>>>> 73
>>>>
>>>> Ken - K0PP
>>>>
>>>> On Feb 13, 2017 07:15, "Don Wilhelm [hidden email] <mailto:
>>>> [hidden email]> [KX3]" <[hidden email] <mailto:
>>>> [hidden email]>> wrote:
>>>>
>>>> Bob,
>>>>
>>>> Check out the Win4K3 software (http://va2fsq.com/spectrum-scopes/
>>>> <http://va2fsq.com/spectrum-scopes/>). It
>>>> has support for the KX2 which allows the use of SDRPlay to produce a
>>>> panadapter display.
>>>>
>>>> 73,
>>>> Don W3FPR
>>>>
>>>>
>>>>
>>>> On 2/13/2017 8:29 AM, [hidden email]
>>>> <mailto:[hidden email]> [KX3] wrote:
>>>>>
>>>>>
>>>>> So the question is - Has anyone been able to put together a viable
>>>>> support system for signal analysis (aka - Panadapter?) that can
>>>> be used
>>>>> directly with the KX2?
>>>>>
>>>> __._,_.___
>>>> ------------------------------------------------------------
>>>> ------------
>>>> Posted by: Don Wilhelm <[hidden email]
>>>> <mailto:[hidden email]>>
>>>> ------------------------------------------------------------
>>>> ------------
>>>> Reply via web post
>>>> <https://groups.yahoo.com/neo/groups/KX3/conversations/messa
>>>> ges/61168;_ylc=X3oDMTJybnBybGFwBF9TAzk3MzU5NzE0BGdycElkAzc0N
>>>> TIwOTQ3BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM2MTE2OARzZWMDZnRyB
>>>> HNsawNycGx5BHN0aW1lAzE0ODY5OTUzMTE-?act=reply&messageNum=61168>
>>>> • Reply to sender
>>>> <mailto:[hidden email]?subject=Re%3A%20%5BKX3%5D%20K
>>>> X2%20Spectrum%20Software%3F>
>>>> • Reply to group
>>>> <mailto:[hidden email]?subject=Re%3A%20%5BKX3%5D%20KX2%
>>>> 20Spectrum%20Software%3F>
>>>> • Start a New Topic
>>>> <https://groups.yahoo.com/neo/groups/KX3/conversations/newto
>>>> pic;_ylc=X3oDMTJmOGxubG1hBF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ
>>>> 3BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNudHBjBHN0aW1lAzE0ODY5OTUzMTE-
>>>>>
>>>> • Messages in this topic
>>>> <https://groups.yahoo.com/neo/groups/KX3/conversations/topic
>>>> s/61167;_ylc=X3oDMTM3NW9wZzloBF9TAzk3MzU5NzE0BGdycElkAzc0NTI
>>>> wOTQ3BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAM2MTE2OARzZWMDZnRyBHN
>>>> sawN2dHBjBHN0aW1lAzE0ODY5OTUzMTEEdHBjSWQDNjExNjc->
>>>> (2)
>>>>
>>>> ------------------------------------------------------------
>>>> ------------
>>>> Have you tried the highest rated email app? <https://yho.com/1wwmgg>
>>>> With 4.5 stars in iTunes, the Yahoo Mail app is the highest rated
>>>> email app on the market. What are you waiting for? Now you can
>>>> access all your inboxes (Gmail, Outlook, AOL and more) in one
>>>> place. Never delete an email again with 1000GB of free cloud storage.
>>>> ------------------------------------------------------------
>>>> ------------
>>>> Visit Your Group
>>>> <https://groups.yahoo.com/neo/groups/KX3/info;_ylc=X3oDMTJma
>>>> mppbnVuBF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ3BGdycHNwSWQDMTcwN
>>>> TA2MzEwOARzZWMDdnRsBHNsawN2Z2hwBHN0aW1lAzE0ODY5OTUzMTE->
>>>>
>>>>
>>>> * New Members
>>>> <https://groups.yahoo.com/neo/groups/KX3/members/all;_ylc=X3
>>>> oDMTJnaWxsbTY2BF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ3BGdycHNwSW
>>>> QDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2bWJycwRzdGltZQMxNDg2OTk1MzEx>
>>>> 11
>>>> * New Photos
>>>> <https://groups.yahoo.com/neo/groups/KX3/photos/photostream;
>>>> _ylc=X3oDMTJnaWdyN21hBF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ3BGd
>>>> ycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2cGhvdARzdGltZQMxNDg2OTk1MzEx>
>>>> 1
>>>>
>>>> Yahoo! Groups
>>>> <https://groups.yahoo.com/neo;_ylc=X3oDMTJlNGxkaWt0BF9TAzk3M
>>>> zU5NzE0BGdycElkAzc0NTIwOTQ3BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZ
>>>> nRyBHNsawNnZnAEc3RpbWUDMTQ4Njk5NTMxMQ-->
>>>>
>>>> • Privacy
>>>> <https://info.yahoo.com/privacy/us/yahoo/groups/details.html> •
>>>> Unsubscribe
>>>> <mailto:[hidden email]?subject=Unsubscribe> •
>>>> Terms of Use <https://info.yahoo.com/legal/us/yahoo/utos/terms/>
>>>>
>>>> .
>>>>
>>>> __,_._,___
>>>>
>>>>
>>>>
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

Byron Servies

Re: K2 IF output

In reply to this post by Ken G Kopp

Hi Ken,

Clifton Labs products were acquired by DX Engineering:

https://www.dxengineering.com/techarticles/dxepressreleases/dx-engineering-acquires-clifton-laboratories

Perhaps they will know if the Z1000B is going to be produced again.

73, Byron N6NUL

On Mon, Feb 13, 2017 at 9:43 AM, Ken G Kopp <[hidden email]> wrote:
> Who makes a Clifton Labs Z1000B replacement for the K2?
>

--
- Northern California Contest Club
- CU in the Cal QSO Party 7-8 Oct 2017
- www.cqp.org
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Leroy

Re: K2 IF output

In reply to this post by Heinz Baertschi

The Cliffton Webb unit was specifically made for K2 exact signal/clean easy
physical fit internally,
and a external IF pass band filter for a clean signal no matter what kind
of signals
are present in your shack.
Not a area of your receiver where you want to be hacking about. Just saying.

73 Leroy AB7CE

-----Original Message-----
From: Heinz Bärtschi
Sent: Monday, February 13, 2017 11:22 AM
To: Ken G Kopp
Cc: [hidden email]
Subject: Re: [Elecraft] K2 IF output

That would be an option:

IF Adapter full kit (SMD components):
http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapter

IF Adapter kit (all SMD components soldered):
http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapterBestückt

73, Heinz HB9BCB

Don Wilhelm

Re: K2 IF output

The Clifton Labs Z10000B was a general purpose instrumentation
amplifier. One version was specific for the K2 by adding a filter
The buffer amp at QRP projects is specifically designed for the K2.
See
http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapter.

73,
Don W3FPR

On 2/13/2017 8:22 PM, lmarion wrote:
>
> The Cliffton Webb unit was specifically made for K2 exact signal/clean
> easy physical fit internally,
> and a external IF pass band filter for a clean signal no matter what
> kind of signals
> are present in your shack.
> Not a area of your receiver where you want to be hacking about. Just
> saying.
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Leroy

Re: K2 IF output

In reply to this post by Leroy

I am using it and it works PERFECTLY on both sides of the signal.
If you want more explanation than I am prepared to provide,
Cliffs site info is still there, just not the products.

73 Leroy AB7CE

-----Original Message-----
From: Ron D'Eau Claire
Sent: Monday, February 13, 2017 8:55 PM
To: 'lmarion' ; 'Heinz Bärtschi' ; 'Ken G Kopp'
Cc: [hidden email]
Subject: RE: [Elecraft] K2 IF output

If you want to see spectrum on either side of the signal, you do not want a
filter in the loop. Ideally, you would see the entire spectrum *before* any
I.F. filtering on the panadapter.

73, Ron AC7AC

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of
lmarion
Sent: Monday, February 13, 2017 5:22 PM
To: Heinz Bärtschi; Ken G Kopp
Cc: [hidden email]
Subject: Re: [Elecraft] K2 IF output

The Cliffton Webb unit was specifically made for K2 exact signal/clean easy
physical fit internally, and a external IF pass band filter for a clean
signal no matter what kind of signals are present in your shack.
Not a area of your receiver where you want to be hacking about. Just saying.

73 Leroy AB7CE

-----Original Message-----
From: Heinz Bärtschi
Sent: Monday, February 13, 2017 11:22 AM
To: Ken G Kopp
Cc: [hidden email]
Subject: Re: [Elecraft] K2 IF output

That would be an option:

IF Adapter full kit (SMD components):
http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapter

IF Adapter kit (all SMD components soldered):
http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapterBestückt

73, Heinz HB9BCB

> Am 13.02.2017 um 18:43 schrieb Ken G Kopp <[hidden email]>:
>
> Who makes a Clifton Labs Z1000B replacement for the K2?
>
>> On Feb 13, 2017 07:46, "Don Wilhelm" <[hidden email]> wrote:
>>
>> Ken,
>>
>> Sorry, but I do not.
>> There is a ham in England who produces a buffer amplifier that can be
>> used, but I cannot recall who.
>> If you ask on the reflector for a Clifton Labs Z10000B replacement,
>> you may get some hits.
>>
>> 73,
>> Don W3FPR
>>>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Bob-2

Re: K2 IF output

Hi Ron,

The filter was a 200kc wide bandpass filter so you would see all
the signals of interest. So may have helped with the input to the LP Pan which
was the hot setup back then.

Here:

http://www.cliftonlaboratories.com/K2_Filter.htm

73,
Bob
K2TK ex KN2TKR (1956) and K2TKR

On 2/14/2017 12:00 AM, lmarion wrote:

> I am using it and it works PERFECTLY on both sides of the signal.
> If you want more explanation than I am prepared to provide,
> Cliffs site info is still there, just not the products.
>
> 73 Leroy AB7CE
>
> -----Original Message----- From: Ron D'Eau Claire
> Sent: Monday, February 13, 2017 8:55 PM
> To: 'lmarion' ; 'Heinz Bärtschi' ; 'Ken G Kopp'
> Cc: [hidden email]
> Subject: RE: [Elecraft] K2 IF output
>
> If you want to see spectrum on either side of the signal, you do not want a
> filter in the loop. Ideally, you would see the entire spectrum *before* any
> I.F. filtering on the panadapter.
>
> 73, Ron AC7AC
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email]] On Behalf Of lmarion
> Sent: Monday, February 13, 2017 5:22 PM
> To: Heinz Bärtschi; Ken G Kopp
> Cc: [hidden email]
> Subject: Re: [Elecraft] K2 IF output
>
>
> The Cliffton Webb unit was specifically made for K2 exact signal/clean easy
> physical fit internally, and a external IF pass band filter for a clean
> signal no matter what kind of signals are present in your shack.
> Not a area of your receiver where you want to be hacking about. Just saying.
>
> 73 Leroy AB7CE
>
>
> -----Original Message-----
> From: Heinz Bärtschi
> Sent: Monday, February 13, 2017 11:22 AM
> To: Ken G Kopp
> Cc: [hidden email]
> Subject: Re: [Elecraft] K2 IF output
>
> That would be an option:
>
> IF Adapter full kit (SMD components):
> http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapter
>
>
> IF Adapter kit (all SMD components soldered):
> http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapterBestückt
>
>
> 73, Heinz HB9BCB
>
>
>> Am 13.02.2017 um 18:43 schrieb Ken G Kopp <[hidden email]>:
>>
>> Who makes a Clifton Labs Z1000B replacement for the K2?
>>
>>> On Feb 13, 2017 07:46, "Don Wilhelm" <[hidden email]> wrote:
>>>
>>> Ken,
>>>
>>> Sorry, but I do not.
>>> There is a ham in England who produces a buffer amplifier that can be
>>> used, but I cannot recall who.
>>> If you ask on the reflector for a Clifton Labs Z10000B replacement,
>>> you may get some hits.
>>>
>>> 73,
>>> Don W3FPR
>>>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

Leroy

Re: K2 IF output

It works perfectly with HSDR that I use and several others, I have never
used it with LP Pan however.

Leroy AB7CE

-----Original Message-----
From: Bob
Sent: Monday, February 13, 2017 10:19 PM
To: Ron D'Eau Claire
Cc: [hidden email]
Subject: Re: [Elecraft] K2 IF output

Hi Ron,

The filter was a 200kc wide bandpass filter so you would see
all
the signals of interest. So may have helped with the input to the LP Pan
which
was the hot setup back then.

Here:

http://www.cliftonlaboratories.com/K2_Filter.htm

73,
Bob
K2TK ex KN2TKR (1956) and K2TKR

On 2/14/2017 12:00 AM, lmarion wrote:

> I am using it and it works PERFECTLY on both sides of the signal.
> If you want more explanation than I am prepared to provide,
> Cliffs site info is still there, just not the products.
>
> 73 Leroy AB7CE
>
> -----Original Message----- From: Ron D'Eau Claire
> Sent: Monday, February 13, 2017 8:55 PM
> To: 'lmarion' ; 'Heinz Bärtschi' ; 'Ken G Kopp'
> Cc: [hidden email]
> Subject: RE: [Elecraft] K2 IF output
>
> If you want to see spectrum on either side of the signal, you do not want
> a filter in the loop. Ideally, you would see the entire spectrum *before*
> any I.F. filtering on the panadapter.
>
> 73, Ron AC7AC
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email]] On Behalf Of
> lmarion
> Sent: Monday, February 13, 2017 5:22 PM
> To: Heinz Bärtschi; Ken G Kopp
> Cc: [hidden email]
> Subject: Re: [Elecraft] K2 IF output
>
>
> The Cliffton Webb unit was specifically made for K2 exact signal/clean
> easy physical fit internally, and a external IF pass band filter for a
> clean signal no matter what kind of signals are present in your shack.
> Not a area of your receiver where you want to be hacking about. Just
> saying.
>
> 73 Leroy AB7CE
>
>
> -----Original Message-----
> From: Heinz Bärtschi
> Sent: Monday, February 13, 2017 11:22 AM
> To: Ken G Kopp
> Cc: [hidden email]
> Subject: Re: [Elecraft] K2 IF output
>
> That would be an option:
>
> IF Adapter full kit (SMD components):
> http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapter
>
> IF Adapter kit (all SMD components soldered):
> http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapterBestückt
>
> 73, Heinz HB9BCB
>
>
>> Am 13.02.2017 um 18:43 schrieb Ken G Kopp <[hidden email]>:
>>
>> Who makes a Clifton Labs Z1000B replacement for the K2?
>>
>>> On Feb 13, 2017 07:46, "Don Wilhelm" <[hidden email]> wrote:
>>>
>>> Ken,
>>>
>>> Sorry, but I do not.
>>> There is a ham in England who produces a buffer amplifier that can be
>>> used, but I cannot recall who.
>>> If you ask on the reflector for a Clifton Labs Z10000B replacement,
>>> you may get some hits.
>>>
>>> 73,
>>> Don W3FPR
>>>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

Doug Person-4

Re: K2 IF output

In reply to this post by Don Wilhelm

That's a pretty neat little kit. Anyone have experience with it?

Doug -- K0DXV

On 2/13/2017 6:41 PM, Don Wilhelm wrote:

> The Clifton Labs Z10000B was a general purpose instrumentation
> amplifier. One version was specific for the K2 by adding a filter
> The buffer amp at QRP projects is specifically designed for the K2.
> See
> http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapter.
>
> 73,
> Don W3FPR
>
>
>
> On 2/13/2017 8:22 PM, lmarion wrote:
>>
>> The Cliffton Webb unit was specifically made for K2 exact signal/clean
>> easy physical fit internally,
>> and a external IF pass band filter for a clean signal no matter what
>> kind of signals
>> are present in your shack.
>> Not a area of your receiver where you want to be hacking about. Just
>> saying.
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

Elecraft mailing list

Re: K2 IF output

I just ordered one today

You need to register on the site so the pricing shows up correct

From: Doug Person <[hidden email]>
To: [hidden email]
Sent: Tuesday, February 14, 2017 2:49 PM
Subject: Re: [Elecraft] K2 IF output

That's a pretty neat little kit. Anyone have experience with it?

Doug -- K0DXV

On 2/13/2017 6:41 PM, Don Wilhelm wrote:

Hajo Dezelski

Re: K2 IF output

In reply to this post by Doug Person-4

Hi Doug,

it works without any problems since ... I don't remember when.
But you can also buy this board with all SMT parts already soldered.
http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapterBest%C3%BCckt

73 de
Hajo dl1sdz

---
Cela est bien dit, mais il faut cultiver notre jardin.

http://hajos-kontrapunkte.blogspot.de/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Elecraft mailing list

Re: K2 IF output

I hope the instructions are in English
Else I need to go Visit my mother to translate

From: Hajo Dezelski <[hidden email]>
To: Doug Person <[hidden email]>
Cc: Elecraft Reflector <[hidden email]>
Sent: Tuesday, February 14, 2017 3:26 PM
Subject: Re: [Elecraft] K2 IF output

Hi Doug,

it works without any problems since ... I don't remember when.
But you can also buy this board with all SMT parts already soldered.
http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapterBest%C3%BCckt

73 de
Hajo dl1sdz

---
Cela est bien dit, mais il faut cultiver notre jardin.

http://hajos-kontrapunkte.blogspot.de/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Doug Person-4

Re: K2 IF output

In reply to this post by Hajo Dezelski

Thanks! I will certainly order one.

Doug -- K0DXV

On 2/14/2017 1:26 PM, Hajo Dezelski wrote:

> Hi Doug,
>
> it works without any problems since ... I don't remember when.
> But you can also buy this board with all SMT parts already soldered.
> http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapterBest%C3%BCckt
>
> 73 de
> Hajo dl1sdz
>
> ---
> Cela est bien dit, mais il faut cultiver notre jardin.
>
> http://hajos-kontrapunkte.blogspot.de/

Heinz Baertschi

Re: K2 IF output

In reply to this post by Elecraft mailing list

> Am 14.02.2017 um 22:07 schrieb Harry Yingst via Elecraft <[hidden email]>:
>
> I hope the instructions are in English
> Else I need to go Visit my mother to translate

However, it does not seem to be a labyrinth, hi.
http://dd2nu.my1.cc/ZF_AdapterK2.pdf

Have fun!
73, Heinz HB9BCB

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Elecraft mailing list

Re: K2 IF output

Thank you
I ran it through Google translator
Not much info needed other than build it as per the diagram

From: Heinz Bärtschi <[hidden email]>
To: Harry Yingst <[hidden email]>
Cc: Elecraft Reflector <[hidden email]>
Sent: Tuesday, February 14, 2017 4:54 PM
Subject: Re: [Elecraft] K2 IF output

> Am 14.02.2017 um 22:07 schrieb Harry Yingst via Elecraft <[hidden email]>:
>
> I hope the instructions are in English
> Else I need to go Visit my mother to translate

However, it does not seem to be a labyrinth, hi.
http://dd2nu.my1.cc/ZF_AdapterK2.pdf

Have fun!
73, Heinz HB9BCB

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]