Re: K3 K3DSPUPGD Installation info?

[Fred Atchley]

Terry, the upgrade board did not come with any special instructions. I
installed mine by following the guidelines in the K3 Kit Assembly Manual. It
was a very easy mod. Of course, the same electrostatic discharge prevention
cautions apply (I.e. you need an ESD mat and wrist strap.)

 

Good luck OM & Happy New Year, Fred

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Terry Schieler]

Thanks Fred.  

Terry, W0FM

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Fred Atchley
Sent: Saturday, December 26, 2009 10:41 AM
To: [hidden email]
Subject: Re: [Elecraft] K3 K3DSPUPGD Installation info?

Terry, the upgrade board did not come with any special instructions. I
installed mine by following the guidelines in the K3 Kit Assembly Manual. It
was a very easy mod. Of course, the same electrostatic discharge prevention
cautions apply (I.e. you need an ESD mat and wrist strap.)

 

Good luck OM & Happy New Year, Fred

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Terry Schieler]

Thanks Fred! Happy New Year!

Terry, W0FM


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Fred Atchley
Sent: Saturday, December 26, 2009 10:41 AM
To: [hidden email]
Subject: Re: [Elecraft] K3 K3DSPUPGD Installation info?

Terry, the upgrade board did not come with any special instructions. I
installed mine by following the guidelines in the K3 Kit Assembly Manual. It
was a very easy mod. Of course, the same electrostatic discharge prevention
cautions apply (I.e. you need an ESD mat and wrist strap.)

 

Good luck OM & Happy New Year, Fred

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html