Re: K3 ,SSB settings,

[Viggo Magnus Nilsen]

>
> Hello .,
>
> Cant get my Elecraft K3 to work in SSB mode :-((, I am an newcomer to K3, and want to ask :Is  there any  settings in the config meny that can disable the SSB mode?, the mic is the orginal hand mic, and it bring the K3 in PTT, but no power out during settings of mic gain and cmp gain......
>
> 73'Viggo  LA9NEA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Viggo Magnus Nilsen]

Hello again,

The Bias was turned off........,now the K3 working fine in SSB mode....

73,Viggo  LA9NEA

>
>
>
> >
> > Hello .,
> >
> > Cant get my Elecraft K3 to work in SSB mode :-((, I am an newcomer to K3, and want to ask :Is  there any  settings in the config meny that can disable the SSB mode?, the mic is the orginal hand mic, and it bring the K3 in PTT, but no power out during settings of mic gain and cmp gain......
> >
> > 73'Viggo  LA9NEA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Matt Zilmer-3]

Make sure you have the correct Mic selected, and that it's configured
properly.  Mic inputs are on the front and rear panel.  The front
panel socket is an 8-pin Foster type, and the rear is a 3.5mm
stereo-type jack.

If you have the hand mic plugged into the front panel, make sure the
BIAS setting is correct.  If BIAS is off and you're using a condenser
hand mic, this might explain the no-audio problem.

73 and Happy New Year!
matt
W6NIA



On Thu, 1 Jan 2015 17:19:14 +0100 (MET), you wrote:

>
>
>
>>
>> Hello .,
>>
>> Cant get my Elecraft K3 to work in SSB mode :-((, I am an newcomer to K3, and want to ask :Is  there any  settings in the config meny that can disable the SSB mode?, the mic is the orginal hand mic, and it bring the K3 in PTT, but no power out during settings of mic gain and cmp gain......
>>
>> 73'Viggo  LA9NEA
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to [hidden email]

Matt Zilmer, W6NIA
--
"Give me six hours to chop down a tree and I will
spend the first four sharpening the axe." -A. Lincoln
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]