Elecraft › [K3]

Recalling power output levels with K3

Classic

List

Threaded

4 messages Options

K4GM-George

Recalling power output levels with K3

Does the K3 recall output levels ONLY when used with the KPA-500 or will
it recall the levels for each band irrespective of the amp used ?

George K4GM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Jim Bennett

Re: Recalling power output levels with K3

That's one for the Elecraft developers to answer here on the reflector…!

On Thursday, Mar 1, 2012, at Thursday, 9:36 AM, K4GM-George wrote:

> But must the K3 be used with a KPA500 for this to occur or is there a command in the config somewhere to tell the K3 to recall a power level for each band so that any amp can be used???
>
> George K4GM
>
> On 3/1/2012 11:58 AM, Jim Bennett wrote:
>> Each band. And it recalls the proper level depending of if the KPA500 is in standby or operate mode!
>>
>> On Thursday, Mar 1, 2012, at Thursday, 8:43 AM, K4GM-George wrote:
>>
>>> Does the K3 recall output levels ONLY when used with the KPA-500 or will
>>> it recall the levels for each band irrespective of the amp used ?
>>>
>>> George K4GM
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>

Don Wilhelm-4

Re: Recalling power output levels with K3

In reply to this post by K4GM-George

George,

You can set the menu for per-band power levels - see the K3 manual page 27.
With the KPA500 connected to the K3 with the AUX cable, there will be an
additional per band power setting available. See the KPA500 manual page 9.

73,
Don W3FPR

On 3/1/2012 11:43 AM, K4GM-George wrote:
> Does the K3 recall output levels ONLY when used with the KPA-500 or will
> it recall the levels for each band irrespective of the amp used ?
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Oliver Dröse

Re: Recalling power output levels with K3

In reply to this post by Jim Bennett

That's one for everybody who read the manual! ;-))

You can set independent power levels for each band. Use it myself with my
tube amp ...

@Wayne:
Maybe you should stop putting that much effort into the (currently KX3)
manual(s) if nobody is reading them. ;-))

Vy 73, Olli - DH8BQA
http://www.dh8bqa.de

----- Original Message -----
From: "Jim Bennett" <[hidden email]>
To: "Elecraft Reflector" <[hidden email]>
Sent: Thursday, March 01, 2012 6:51 PM
Subject: Re: [Elecraft] Recalling power output levels with K3

That's one for the Elecraft developers to answer here on the reflector…!

On Thursday, Mar 1, 2012, at Thursday, 9:36 AM, K4GM-George wrote:

> But must the K3 be used with a KPA500 for this to occur or is there a
> command in the config somewhere to tell the K3 to recall a power level for
> each band so that any amp can be used???
>
> George K4GM
>
> On 3/1/2012 11:58 AM, Jim Bennett wrote:
>> Each band. And it recalls the proper level depending of if the KPA500 is
>> in standby or operate mode!
>>
>> On Thursday, Mar 1, 2012, at Thursday, 8:43 AM, K4GM-George wrote:
>>
>>> Does the K3 recall output levels ONLY when used with the KPA-500 or will
>>> it recall the levels for each band irrespective of the amp used ?
>>>
>>> George K4GM
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

-----
eMail ist virenfrei.
Von AVG überprüft - www.avg.de
Version: 2012.0.1913 / Virendatenbank: 2114/4842 - Ausgabedatum: 29.02.2012

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html