Depends on the front end device.
This is typical of smoked GaAsFETS, for example, dumping a hundred watts in
the tail end of a mast mounted antenna pre-amp will cause this result.
I had a "friend" who had this happen (wink-wink.......).
73, Charlie k3ICH
-----Original Message-----
From:
[hidden email] <
[hidden email]> On
Behalf Of Dana Roode K6NR
Sent: Saturday, December 26, 2020 4:45 PM
To: Elecraft Reflector <
[hidden email]>
Subject: [Elecraft] S2-3 on K3 With No Antenna?
Any thoughts on what it means to have a s2-3 noise when I switch in the
preamp on my K3 with no antenna connected?
Dana
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html Message
delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]