My KX3 is my first (and only) Elecraft and I am curious about the procedure
to have have it sent in have have them do a look over of the rig. I've had had it for a few months and would just to get a clean bill of health. Any comments on the procedure? Cost? I'll look on their website too but I wanted to hear from those that have gone through the experience as well! Thank you and 7 3 Bob-WX2I ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
With your KX3 being just a few months old, my suggestion, if you are concerned about something would be to start with a phone call. I usually send my heavy use contest equipment (K3) in every 3 or so years and that accounts for 10's of thousands of qso's.
If your want a check up after just a few months I am assuming something is concerning you and a phone call to elecraft support would probably give you a comfort level. Chris N6WM ________________________________________ From: [hidden email] [[hidden email]] on behalf of Bob Jonas [[hidden email]] Sent: Wednesday, May 31, 2017 10:56 AM To: [hidden email] Subject: [Elecraft] Sending in for a Tuneup My KX3 is my first (and only) Elecraft and I am curious about the procedure to have have it sent in have have them do a look over of the rig. I've had had it for a few months and would just to get a clean bill of health. Any comments on the procedure? Cost? I'll look on their website too but I wanted to hear from those that have gone through the experience as well! Thank you and 7 3 Bob-WX2I ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by Bob Jonas
Bob,
If you bought it new, it had that tuneup before it left the factory - any problems in the first year should be taken care of under warranty. If you do have problems, the first course of action is to contact Elecraft support. If you bought it used, and you want it checked out at the factory the same as would be done if it were new, you will need an RSA to send it in. To start that process, contact [hidden email]. Wait until you have the RSA number and form and instructions before sending it. I don't know what the normal time to check it out will be, but my guess is about 1.5 hours at $99 per hour plus shipping. It will come back to you having been reset to factory defaults with firmware updated, so if you have established some favorite setting like TX/RX EQ or AGC parameters, etc. Write your settings down before sending. In this particular case I would suggest not relying on a saved configuration file. 73, Don W3FPR On 5/31/2017 1:56 PM, Bob Jonas wrote: > My KX3 is my first (and only) Elecraft and I am curious about the procedure > to have have it sent in have have them do a look over of the rig. > I've had had it for a few months and would just to get a clean bill of > health. > Any comments on the procedure? > Cost? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by Bob Jonas
Why do you think it needs a "look over"?
Are you having issues? To send your radio you should call customer support first and they can give you all the instructions on the procedure. Sent from my iPhone ...nr4c. bill > On May 31, 2017, at 1:56 PM, Bob Jonas <[hidden email]> wrote: > > My KX3 is my first (and only) Elecraft and I am curious about the procedure > to have have it sent in have have them do a look over of the rig. > I've had had it for a few months and would just to get a clean bill of > health. > Any comments on the procedure? > Cost? > I'll look on their website too but I wanted to hear from those that have > gone through the experience as well! > Thank you and 7 3 > > Bob-WX2I > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Free forum by Nabble | Edit this page |