Rich,
Rather than attempting to walk you through the steps to bypass the KDSP2 (it
is in the KDSP2 menu which is kicked in with the DISPLAY button, not AFIL).
I suggest you drag out the KDSP2 manual and follow the instructions to put
it into bypass state. Actually, I never remember the exact sequence myself,
so I just look it up when I need to do it.
73,
Don W3FPR
> -----Original Message-----
>
> Old age must be kicking in :(
>
> I originally aligned the K2 using Spectrogram and it worked great.
>
> I am doing a realignment and am lost.
>
> I am running a DSP unit and it appears that Toms instructions say that if
> you are running either DSP or Audio options you need to turn the
> AFIL off in
> the K2 Menu AND set the in/out switch to OUT on the PC board.
>
> Well to start, I dont see a AFIL in the K2 menu and dont see any
> switches,
> jumpers, etc on the DSP board.
>
> What am I missing?
>
> Thanks and 73,
> Rich
> kd0zv
>
>
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft>
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 268.1.0/269 - Release Date: 2/24/2006
>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
