Hello Group.... I am getting ready to add some items to my K3; ATU, couple of filters and the general coverage receive option. I am looking at adding the sub-receiver too. Is that as daunting as it looks?
Thanks. Larry, KN8N ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
On 5/11/2012 9:42 AM, Larry Boekeloo wrote:
> I am looking at adding the sub-receiver too. Is that as daunting as it looks? It's a bit of a shoe-horn job to cram the sub-RX into the chassis once you've got it built, but otherwise no big deal. It's not bad enough to avoid doing, but enough of a PITA that you'd like to avoid taking it out and putting it back in. :) For that reason, I STRONGLY suggest that you buy and install whatever options (including filters) that you think you're going to want at the same time you're adding the sub-RX. 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by Larry Boekeloo
Larry,
Cannot do without the sub Rx. Definitely worth it! It is quite easy to build it into the K3. See this: http://www.youtube.com/watch?v=5EJL8SlJ_L8 73, Arie PA3A Op 11-5-2012 18:42, Larry Boekeloo schreef: > Hello Group.... I am getting ready to add some items to my K3; ATU, couple of filters and the general coverage receive option. I am looking at adding the sub-receiver too. Is that as daunting as it looks? > > Thanks. > > Larry, KN8N > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Adding the sub receiver is not that bad. Just take your time.
Mike W0MU W0MU-1 CC Cluster w0mu.net On 5/11/2012 12:13 PM, Arie Kleingeld PA3A wrote: > Larry, > > Cannot do without the sub Rx. Definitely worth it! > > It is quite easy to build it into the K3. See this: > http://www.youtube.com/watch?v=5EJL8SlJ_L8 > > 73, > Arie PA3A > > Op 11-5-2012 18:42, Larry Boekeloo schreef: >> Hello Group.... I am getting ready to add some items to my K3; ATU, couple of filters and the general coverage receive option. I am looking at adding the sub-receiver too. Is that as daunting as it looks? >> >> Thanks. >> >> Larry, KN8N >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
One word of caution with sub receiver.
Take your time and be careful with back of sub receiver near the IO board. There are a couple of surface mounted caps on the IO board and you can damage them if you are not careful. 73 Dave wo2x Sent from my iPhone On May 11, 2012, at 2:47 PM, W0MU Mike Fatchett <[hidden email]> wrote: > Adding the sub receiver is not that bad. Just take your time. > > Mike W0MU > > W0MU-1 CC Cluster w0mu.net > > > On 5/11/2012 12:13 PM, Arie Kleingeld PA3A wrote: >> Larry, >> >> Cannot do without the sub Rx. Definitely worth it! >> >> It is quite easy to build it into the K3. See this: >> http://www.youtube.com/watch?v=5EJL8SlJ_L8 >> >> 73, >> Arie PA3A >> >> Op 11-5-2012 18:42, Larry Boekeloo schreef: >>> Hello Group.... I am getting ready to add some items to my K3; ATU, couple of filters and the general coverage receive option. I am looking at adding the sub-receiver too. Is that as daunting as it looks? >>> >>> Thanks. >>> >>> Larry, KN8N >>> >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[hidden email] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Installing the sub receiver is much easier if you remove the left side panel (as long as you do not also have the 2M transverter). With the left side off it is much easier to maneuver and line up the sub RX. It certainly allows you to see all the connections, etc. 73, ... Joe, W4TV On 5/11/2012 3:06 PM, Dave wrote: > One word of caution with sub receiver. > Take your time and be careful with back of sub receiver near the IO board. There are a couple of surface mounted caps on the IO board and you can damage them if you are not careful. > > 73 > Dave > wo2x > > > Sent from my iPhone > > On May 11, 2012, at 2:47 PM, W0MU Mike Fatchett<[hidden email]> wrote: > >> Adding the sub receiver is not that bad. Just take your time. >> >> Mike W0MU >> >> W0MU-1 CC Cluster w0mu.net >> >> >> On 5/11/2012 12:13 PM, Arie Kleingeld PA3A wrote: >>> Larry, >>> >>> Cannot do without the sub Rx. Definitely worth it! >>> >>> It is quite easy to build it into the K3. See this: >>> http://www.youtube.com/watch?v=5EJL8SlJ_L8 >>> >>> 73, >>> Arie PA3A >>> >>> Op 11-5-2012 18:42, Larry Boekeloo schreef: >>>> Hello Group.... I am getting ready to add some items to my K3; ATU, couple of filters and the general coverage receive option. I am looking at adding the sub-receiver too. Is that as daunting as it looks? >>>> >>>> Thanks. >>>> >>>> Larry, KN8N >>>> >>>> ______________________________________________________________ >>>> Elecraft mailing list >>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>> Help: http://mailman.qth.net/mmfaq.htm >>>> Post: mailto:[hidden email] >>>> >>>> This list hosted by: http://www.qsl.net >>>> Please help support this email list: http://www.qsl.net/donate.html >>>> >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[hidden email] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Got everything working again. I took the K3 serial cable off the P3 and
went to the computer direct. Held in the Power switch for 10 seconds while applying 12 V and then I was able to down load the new S/W. ??? why because I updated prior to this and all worked through the P3. I'm not technical and have to learn everything the hard way. Always grateful for any help given. Thanks Lu. Phil Philip LaMarche 727-944-3226 727-510-5038 Cell www.w9dvm.com WWW.FLAMGROUP.COM K3 # 1605 KPA500 # 029 P3 #1480 CCA 98-00827 CRA 1701 W9DVM -----Original Message----- From: Joe Subich, W4TV [mailto:[hidden email]] Sent: Friday, May 11, 2012 3:57 PM To: Phil LaMarche Subject: Re: [Elecraft] Sub-Receiver Dick and others have pointed you to the "help file" in the K3 Utility. See particularly the section "Forcing the K3 into "Firmware Load Required" mode. If you do not receive the "K3 boot loader is ready" message after pressing "Test Communications" in the K3 Utility, follow the USB to Serial Adapter Troubleshooting section to find out why you can not communicate with the K3. 73, ... Joe, W4TV On 5/11/2012 3:34 PM, Phil LaMarche wrote: > Joe, Can you help me get the radio to turn on again? > > Attempted to download new S/W version and the utility wouldn't connect > to K3. Kept rotating through the baud rates. No way to stop it. > Tried to turn off but only MCU LD showed in the window. Removed the 13 > volts and then turned back on and the MCU LD is greyed in the window > and the TX Red Light is flashing. Frozen. Any help on what to do next? > > > > Phil > > Philip LaMarche > > > 727-944-3226 > 727-510-5038 Cell > www.w9dvm.com > WWW.FLAMGROUP.COM > > K3 # 1605 > KPA500 # 029 > P3 #1480 > > CCA 98-00827 > CRA 1701 > W9DVM > > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by Jim Brown-10
I thought it would be a pain to take out and in, but it's just time. No real issue. You also have to take it out for the main receiver filters, so you might want to fill that up to what you will want.
Chuck, KE9UW aka Jack, BMW Motorcycles BMWMOA #224 ________________________________________ From: [hidden email] [[hidden email]] on behalf of Jim Brown [[hidden email]] Sent: Friday, May 11, 2012 12:20 PM To: [hidden email] Subject: Re: [Elecraft] Sub-Receiver On 5/11/2012 9:42 AM, Larry Boekeloo wrote: > I am looking at adding the sub-receiver too. Is that as daunting as it looks? It's a bit of a shoe-horn job to cram the sub-RX into the chassis once you've got it built, but otherwise no big deal. It's not bad enough to avoid doing, but enough of a PITA that you'd like to avoid taking it out and putting it back in. :) For that reason, I STRONGLY suggest that you buy and install whatever options (including filters) that you think you're going to want at the same time you're adding the sub-RX. 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Chuck, KE9UW
|
Free forum by Nabble | Edit this page |