|
I was going to install the sub-receiver in my K3.
Then I thought it might me advantageous to have a second
K3 instead.
I need a back up radio also. Are there any
opinions?
Dave N1IX
_______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
A few weeks ago on this reflector I mentioned that I was using my two
K3s for diversity. I have two full station setups (primarily for RTTY contesting), and one is connected to 80/20/10 antennas and the other to a 40/15. Also, each separate station feeds a different side earpiece in my headphones, so it was very easy for me to implement diversity just by linking the VFOs together through N8LP's LP-Bridge program. Even though the "other" K3 is on the "wrong band" antenna, it all works FB. I have not tried to link the master oscillators in the K3s, but I did carefully tweak the freq calibration so they are on the same freq (within tenths of a Hz, I think). Since I already had the two radios here, it made sense for me to do diversity with them when the second radio was not busy, but maybe not so sensible to buy one solely for this. Go back through the archives and search for my posts both here and also the LP-Pan reflector. Jerry W4UK At 18:17 1/25/2009, N1IX wrote: > >I was going to install the sub-receiver in my K3. >Then I thought it might me advantageous to have a second K3 instead. >I need a back up radio also. Are there any opinions? > >Dave N1IX _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
In reply to this post by n1ix
Two K3s would be better than one Dave, but would not give you the automatic muting you need for diversity receive and the benefits of two receivers. With two K3s I think I would want one or both to have two receivers. I am happy with one K3 and two receivers with a couple of Kenwoods for backup, but I would trade a well used TS 850 or a lightly used TS 440 for a second K3 without hesitation
Willis 'Cookie' Cooke K5EWJ --- On Sun, 1/25/09, N1IX <[hidden email]> wrote: > From: N1IX <[hidden email]> > Subject: [Elecraft] Sub-receiver or 2 k3's > To: [hidden email] > Date: Sunday, January 25, 2009, 10:17 AM > I was going to install the sub-receiver in my K3. > Then I thought it might me advantageous to have a second K3 > instead. > I need a back up radio also. Are there any opinions? > > Dave N1IX_______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
CONTENTS DELETED
The author has deleted this message.
|
|
Administrator
|
"I have a dream...."
:) Wayne Ron D'Eau Claire wrote: > Perhaps it's time to revisit that concept with a K3 for each band, or > at > least a K3 for each mode... --- http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
| Free forum by Nabble | Edit this page |
