TCXO3 Method 3 REF CAL when might it be implemented

[Roger Marrotte-2]

Many of us have the TCXO3 and I for one, and I assume many others, would
like to have some idea when the "Method 3 (1 ppm TCXO Option)" will be
implemented.  I'll settle for something like soon, in a few months, by the
end of the year or when we get around to it.  Some statement on the subject
would be appreciated.
 
Thanks, a very satisfied K3 owner,
 
Roger, W1EM
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Bob Serwy]

 Unless I am mistaken, the tcxo3 option gives you +/- 1 ppm now.  Method 3
will improve this to +/- 0.5 ppm (when implemented).  The standard tcxo
provides +/- 5 ppm.


Bob Serwy - N9RS

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Roger Marrotte
Sent: Thursday, July 24, 2008 12:33 PM
To: [hidden email]
Subject: [Elecraft] [K3] TCXO3 Method 3 REF CAL when might it be implemented

Many of us have the TCXO3 and I for one, and I assume many others, would
like to have some idea when the "Method 3 (1 ppm TCXO Option)" will be
implemented.  I'll settle for something like soon, in a few months, by the
end of the year or when we get around to it.  Some statement on the subject
would be appreciated.
 
Thanks, a very satisfied K3 owner,
 
Roger, W1EM
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com



_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Brett Howard]

You are not mistaken this is 100% true!  The purchase was not in vain
it gains you an instant 80% increase in accuracy.  Its that last
little bit that isn't implemented yet...

On Thu, Jul 24, 2008 at 11:02 AM, Bob Serwy <[hidden email]> wrote:

>  Unless I am mistaken, the tcxo3 option gives you +/- 1 ppm now.  Method 3
> will improve this to +/- 0.5 ppm (when implemented).  The standard tcxo
> provides +/- 5 ppm.
>
>
> Bob Serwy - N9RS
>
> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of Roger Marrotte
> Sent: Thursday, July 24, 2008 12:33 PM
> To: [hidden email]
> Subject: [Elecraft] [K3] TCXO3 Method 3 REF CAL when might it be implemented
>
> Many of us have the TCXO3 and I for one, and I assume many others, would
> like to have some idea when the "Method 3 (1 ppm TCXO Option)" will be
> implemented.  I'll settle for something like soon, in a few months, by the
> end of the year or when we get around to it.  Some statement on the subject
> would be appreciated.
>
> Thanks, a very satisfied K3 owner,
>
> Roger, W1EM
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Greg - AB7R]

Here's some good new Roger.

It is already working at 1ppm.  So if that's your goal, you were there when
you installed the TCXO-3.  The method 3 calibration is for the FW to enhance
the result to .5ppm.  It's high on Wayne's list but I cannot say when it
will be done.

73
Greg
AB7R

----- Original Message -----
From: "Roger Marrotte" <[hidden email]>
To: <[hidden email]>
Sent: Thursday, July 24, 2008 10:32 AM
Subject: [Elecraft] [K3] TCXO3 Method 3 REF CAL when might it be implemented

> Many of us have the TCXO3 and I for one, and I assume many others, would
> like to have some idea when the "Method 3 (1 ppm TCXO Option)" will be
> implemented.  I'll settle for something like soon, in a few months, by the
> end of the year or when we get around to it.  Some statement on the
> subject
> would be appreciated.
>
> Thanks, a very satisfied K3 owner,
>
> Roger, W1EM
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.138 / Virus Database: 270.5.5/1571 - Release Date: 7/24/2008
> 5:42 PM
>
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com