TX Audio
Locked
 
|
To all the new K3S owners,
I need a little help with an issue I am having with my K3S so I thought I would ask for some input. The issue is with audio being sent from the PC to radio thru the USB cable. Simply put, I have non. Receive audio going back to the PC from the radio is fine. The S meter on HRD sees signals just fine. I can decode CW , PSK , and RTTY fine also. I just can’t transmit any audio. By the way CW sends great, no problem with that. Doesn’t matter what the source is. Could be a digital program or a logging program or a contesting program. I tried DVK files (wav.files) even recorded music but nothing. It appears that Windows is doing it’s job here. You can see the audio being played on the little meters in the playback devices window. But nothing at the radio. I have tried this on 3 different computers with the same results. With different OS. Win.7, Win.8.1. USB drivers seem to load fine when I connect the radio. I checked all the menu settings. Just don’t know where to go from here. Am I missing something? Any suggestions would be appreciated Keith Robinson W4KTR --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Be sure the 3.5mm LINE IN jack has nothing plugged in. if a cable is
plugged into this jack, the KIO3B will only accept LINE audio from the jack, not from the USB. LINE OUT will always be active on both the analog 3.5mm jack as well as USB. 73, Lyle KK7P On 8/5/15 2:21 PM, Keith Robinson wrote: > To all the new K3S owners, > I need a little help with an issue I am having with my K3S so I thought > I would ask for some input. > The issue is with audio being sent from the PC to radio thru the USB cable. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by Keith Robinson
Keith,
May be obvious, but make sure MENU::MIC SEL is set To Line In, and as Lyle is saying nothing shall be plugged into the rear Line In port. On the PC, select "Speakers (USB Audio Codec)" 73 Marco HB9CAT -----Original Message----- From: Elecraft [mailto:[hidden email]] On Behalf Of Keith Robinson Sent: mercoledì, 5. agosto 2015 23:21 To: [hidden email] Subject: [Elecraft] TX Audio To all the new K3S owners, I need a little help with an issue I am having with my K3S so I thought I would ask for some input. The issue is with audio being sent from the PC to radio thru the USB cable. Simply put, I have non. Receive audio going back to the PC from the radio is fine. The S meter on HRD sees signals just fine. I can decode CW , PSK , and RTTY fine also. I just can’t transmit any audio. By the way CW sends great, no problem with that. Doesn’t matter what the source is. Could be a digital program or a logging program or a contesting program. I tried DVK files (wav.files) even recorded music but nothing. It appears that Windows is doing it’s job here. You can see the audio being played on the little meters in the playback devices window. But nothing at the radio. I have tried this on 3 different computers with the same results. With different OS. Win.7, Win.8.1. USB drivers seem to load fine when I connect the radio. I checked all the menu settings. Just don’t know where to go from here. Am I missing something? Any suggestions would be appreciated Keith Robinson W4KTR --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by Lyle Johnson
Has anybody run into this?
Building my K3S and I'm ready to install the K144XV which needs a 1-pin connector on the RF board. The two options in the instructions don't seem to match my board and the errata sheet doesn't address it. I've sent email to tech support, but really need to wrap this project up before the wife gets home tonight and finds her dining table looking like a work bench!! I've been looking through the radio for a 1-pin unused connector pre-installed - no joy. The instructions indicate two possible locations near U12 and C198. No holes in that location on my board. 73 Mark, ab7mp (S# 10186) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Just heard from tech support. I will use pin 1 of P95 and got a thanks for
pointing out an error in the manual. Great bunch of people at Elecraft - fastest reply to an email query I've ever received! Mark, ab7mp -----Original Message----- From: Mark Sent: Friday, August 07, 2015 10:40 AM To: [hidden email] Subject: [Elecraft] K144XV Has anybody run into this? Building my K3S and I'm ready to install the K144XV which needs a 1-pin connector on the RF board. The two options in the instructions don't seem to match my board and the errata sheet doesn't address it. I've sent email to tech support, but really need to wrap this project up before the wife gets home tonight and finds her dining table looking like a work bench!! I've been looking through the radio for a 1-pin unused connector pre-installed - no joy. The instructions indicate two possible locations near U12 and C198. No holes in that location on my board. 73 Mark, ab7mp (S# 10186) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by Mark AB7MP
Elecraft got right back to me on this - error in the manual.
From Elecraft: The KXV144 power cord plugs in to P95 (near the batt on the RF board) the pin 1 end Thanks for pointing the error out in the K3S Manual. 73 Mark, ab7mp -----Original Message----- From: Mark Sent: Friday, August 07, 2015 10:40 AM To: [hidden email] Subject: [Elecraft] K144XV Has anybody run into this? Building my K3S and I'm ready to install the K144XV which needs a 1-pin connector on the RF board. The two options in the instructions don't seem to match my board and the errata sheet doesn't address it. I've sent email to tech support, but really need to wrap this project up before the wife gets home tonight and finds her dining table looking like a work bench!! I've been looking through the radio for a 1-pin unused connector pre-installed - no joy. The instructions indicate two possible locations near U12 and C198. No holes in that location on my board. 73 Mark, ab7mp (S# 10186) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |