The few, the proud, the Beta testers! Free new K3 software.

[Don Rasmussen]

Hi Guys,

This code is fresh off the java mill, enhanced K3 operation at your fingertips. Especially wanting those familiar with Procat Cool V6 to load and use K3BSR-SM (K3 Band Stacking Registers w/S Meter) version 7.1.

Anyone can try this, but those not expecting some small frustration because something does not work 100%, or because something that should have been documented was not - should wait. ;-)

The doc guy (me) had a hard time with the code guy (me) last week and once again we are behind schedule. But close enough for beta. !!

I'll be doing CW during the contest this weekend but others may want something to do with the K3/PC.

http://www.zerobeat.net/mediawiki/index.php/K3_BSR-SM_Version_7

Note - this program has nothing to do with digital modes or remote (internet) operation of K3. It's an operating aid for those (like me) that need it.

Cheers,
Don wb8yqj
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[hb9brj]

Don Rasmussen wrote

This code is fresh off the java mill, enhanced K3 operation at your fingertips.

... but it requires the outdated VBRUN300.DLL in order to run SETUP.EXE.
If the app is programmed in Java, why not distribute it as Java archive?

73, Markus

[chen dave]

hi Don,

     After D/L, it say need VBRUN300.DLL, after D/L VBRUN300.DLL, say can't
find SETUPKIT.DLL ...
      give up.

73 de ba4rf/David

On Sat, Dec 5, 2009 at 1:39 PM, Don Rasmussen <[hidden email]> wrote:

> Hi Guys,
>
> This code is fresh off the java mill, enhanced K3 operation at your
> fingertips. Especially wanting those familiar with Procat Cool V6 to load
> and use K3BSR-SM (K3 Band Stacking Registers w/S Meter) version 7.1.
>
> Anyone can try this, but those not expecting some small frustration because
> something does not work 100%, or because something that should have been
> documented was not - should wait. ;-)
>
> The doc guy (me) had a hard time with the code guy (me) last week and once
> again we are behind schedule. But close enough for beta. !!
>
> I'll be doing CW during the contest this weekend but others may want
> something to do with the K3/PC.
>
> http://www.zerobeat.net/mediawiki/index.php/K3_BSR-SM_Version_7
>
> Note - this program has nothing to do with digital modes or remote
> (internet) operation of K3. It's an operating aid for those (like me) that
> need it.
>
> Cheers,
> Don wb8yqj
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

--

--------------------------------
All the best!

David,ba4rf
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[VE3NFK]

looks nice - found 'setupkit.dll' with google, vbrun300 was on my system with another obsolete program, and got it running - only to find you have limited it to Com 8...
My K3 is on COM 13 ....

good luck  73  John VE3NFK

chen dave wrote

hi Don,

     After D/L, it say need VBRUN300.DLL, after D/L VBRUN300.DLL, say can't
find SETUPKIT.DLL ...
      give up.

73 de ba4rf/David

On Sat, Dec 5, 2009 at 1:39 PM, Don Rasmussen <[e-mail]> wrote:

> Hi Guys,
>
> This code is fresh off the java mill, enhanced K3 operation at your
> fingertips. Especially wanting those familiar with Procat Cool V6 to load
> and use K3BSR-SM (K3 Band Stacking Registers w/S Meter) version 7.1.
>
> Anyone can try this, but those not expecting some small frustration because
> something does not work 100%, or because something that should have been
> documented was not - should wait. ;-)
>
> The doc guy (me) had a hard time with the code guy (me) last week and once
> again we are behind schedule. But close enough for beta. !!
>
> I'll be doing CW during the contest this weekend but others may want
> something to do with the K3/PC.
>
> http://www.zerobeat.net/mediawiki/index.php/K3_BSR-SM_Version_7
>
> Note - this program has nothing to do with digital modes or remote
> (internet) operation of K3. It's an operating aid for those (like me) that
> need it.
>
> Cheers,
> Don wb8yqj
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[e-mail]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



--

--------------------------------
All the best!

David,ba4rf
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[e-mail]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Wp4cw]

I found that I can look at my USB serial adaptor computer setting and change the comport address. You may be able to change the com port from com 8 to com 1-4. Just keep irq conflicts in mind. Ted WP4CW


In a message dated 12/05/09 07:18:34 Pacific Standard Time, [hidden email] writes:


looks nice - found 'setupkit.dll' with google, vbrun300 was on my system
with another obsolete program, and got it running - only to find you have
limited it to Com 8...
My K3 is on COM 13 ....

good luck  73  John VE3NFK
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[VE3NFK]

Hi Ted

Thanks for the comment  _ I am ok with com ports (got 14 ! ) but my
1-8 are configured for those items that 'must' be below 9 -  not the
case with the K3 and the utilities I use with it  (TRX-Manager,
PowerSDR, Skimmer, K3 Util; and occasional HRD)

73

John VE3NFK

2009/12/5 wp4cw [via Elecraft] <[hidden email]>:

>
> I found that I can look at my USB serial adaptor computer setting and change
> the comport address. You may be able to change the com port from com 8 to
> com 1-4. Just keep irq conflicts in mind. Ted WP4CW
>
>
> In a message dated 12/05/09 07:18:34 Pacific Standard Time, [hidden email]
> writes:
>
>
> looks nice - found 'setupkit.dll' with google, vbrun300 was on my system
> with another obsolete program, and got it running - only to find you have
> limited it to Com 8...
> My K3 is on COM 13 ....
>
> good luck  73  John VE3NFK
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> ________________________________
> View message @
> http://n2.nabble.com/The-few-the-proud-the-Beta-testers-Free-new-K3-software-tp4116565p4118588.html
> To unsubscribe from Re: The few, the proud, the Beta testers! Free new K3
> software., click here.
>