Paul,
I can't answer your question but N3RD of Top Ten Devices no doubt can.
I use the Yaesu TT decoder that I had used with my FT-2000D, now sold, but I
bought the Top Ten cable for the K3 rather than making my own. It works
fine with my 160, 80, 40, 30M antennas and a SteppIR that covers 20-6M. I
have to manually switch to the SteppIR for 6M, but the others switch
automatically my DX Engineering switch on top of the tower.
Jim N7US
-----Original Message-----
Hi all,
Have purchased a Top Ten Devices band decoder and am about to build a
cable to connect it to the K3.
Can someone please tell me if the band switching matrix is as follows?
Band A - Band 0
Band B - Band 1
Band C - Band 2
Band D - Band 3
Thanks in advance,
Cheers,
Paul
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html