VOX tripping each receive cycle on FT8

[VA3LX]

I'm having a peculiar problem that I wonder if others have had and resolved.

I'm using a K3 and SignaLink USB interface and WSJT software running FT8
with the current version of WSJT-X.

The issue is that the VOX triggers momentarily at the beginning of each
receive cycle.

I'd be grateful for any ideas of what is causing this.

I've been running FT8 for over a year without this issue occurring.

TNX

Paul VA3LX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Dennis Moore]

Is MAIN: MIC SEL set to LINE IN, and MAIN: MIC+LIN set to OFF?

Dennis NJ6G


On 10/11/2018 14:50, Paul Taenzer wrote:

> I'm having a peculiar problem that I wonder if others have had and resolved.
>
> I'm using a K3 and SignaLink USB interface and WSJT software running FT8
> with the current version of WSJT-X.
>
> The issue is that the VOX triggers momentarily at the beginning of each
> receive cycle.
>
> I'd be grateful for any ideas of what is causing this.
>
> I've been running FT8 for over a year without this issue occurring.
>
> TNX
>
> Paul VA3LX

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bob McGraw - K4TAX]

First, I'd have to ask why are you using VOX?   I find that CAT control
is 100% reliable and is equally as fast or faster than VOX.   Just be
sure the DLY control on the Signalink is set fully counterclockwise.   
Likely your VOX level is too high and AntiVOX level is too low.    I'd
opt for CAT control and not VOX.

73

Bob, K4TAX


On 10/11/2018 4:50 PM, Paul Taenzer wrote:

> I'm having a peculiar problem that I wonder if others have had and resolved.
>
> I'm using a K3 and SignaLink USB interface and WSJT software running FT8
> with the current version of WSJT-X.
>
> The issue is that the VOX triggers momentarily at the beginning of each
> receive cycle.
>
> I'd be grateful for any ideas of what is causing this.
>
> I've been running FT8 for over a year without this issue occurring.
>
> TNX
>
> Paul VA3LX
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]