Virtual com port problem with k3, nap3, and HRD

[Shel Sherman-2]

Is there a virtual com port program other than LP-Bridge that can be used
to simultaneously connect NAP3, and the latest version of Ham Radio Deluxe
to a K3?  The LP-Bridge program does this for earlier versions of HRD, but
the newer versions are written in Unicode and are not compatible with
LP-Bridge. If anyone has a virtual com port program working in the
configuration described above I really want to talk to you.

Thanks,

Shel  WO0C
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Wes (N7WS)]

LP-Bridge works for me but you might try VSPE. Don't use it myself, so can't
help with setup tho...



On 2/18/2015 12:33 PM, Shel Sherman wrote:

> Is there a virtual com port program other than LP-Bridge that can be used
> to simultaneously connect NAP3, and the latest version of Ham Radio Deluxe
> to a K3?  The LP-Bridge program does this for earlier versions of HRD, but
> the newer versions are written in Unicode and are not compatible with
> LP-Bridge. If anyone has a virtual com port program working in the
> configuration described above I really want to talk to you.
>
> Thanks,
>
> Shel  WO0C
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[ve3dvy]

I use VSPE     It just rides nicely in the background with no
intervention.  and will allow  anything I have talk to K3 all at once.  
except for WSjXT which relies on LP-Bridge even when running alone.    
It seems to pass CW keying without timing issues with same port just fine.

beware however  because of some license issue with Microsoft if you have
64 bit OS  you have to pay for it.     for 32 bit OS it is free.

http://www.eterlogic.com/Products.VSPE.html

David Moes
President: Peterborough Amateur Radio Club.
[hidden email]
VE3DVY,  VE3SD

On 2/18/2015 14:33, Shel Sherman wrote:

> Is there a virtual com port program other than LP-Bridge that can be used
> to simultaneously connect NAP3, and the latest version of Ham Radio Deluxe
> to a K3?  The LP-Bridge program does this for earlier versions of HRD, but
> the newer versions are written in Unicode and are not compatible with
> LP-Bridge. If anyone has a virtual com port program working in the
> configuration described above I really want to talk to you.
>
> Thanks,
>
> Shel  WO0C
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]