W1 enclosure ideas?

[ON4WIX]

Hi all

I was just looking at the W1 watt-meter/SWR bridge specs. Since I am craving
some solder fumes I thought it would be nice to build this kit, also because
I have no peak reading wattmeter yet.
I would like to install this kit into a nice enclosure that I could put
upright or slightly slanted on my desk so all LEDs are clearly visible. Have
any of you done such a thing? Any ideas and suggestions would be very
welcome.

Have a nice weekend!

73 de Glenn ON4WIX

K2/100 #5361
K3/100 #0192
Two left hands ;-)

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[M0XDF]

how about the W1 case on here
http://w8fgu.home.comcast.net/~w8fgu/enclosures.html

--  
Those who walk bravely through life, unafraid of loss or failure,
find that they very rarely lose or fail.



On 11 Apr 2008, at 11:27, ON4WIX wrote:
> Hi all
>
> I was just looking at the W1 watt-meter/SWR bridge specs. Since I am  
> craving some solder fumes I thought it would be nice to build this  
> kit, also because I have no peak reading wattmeter yet.
> I would like to install this kit into a nice enclosure that I could  
> put upright or slightly slanted on my desk so all LEDs are clearly  
> visible. Have any of you done such a thing? Any ideas and  
> suggestions would be very welcome.

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Dave Van Wallaghen]

Hi Glenn,

I currently sell and enclosure for the W1 that may be ordered in 3 different
configurations, depending on how you want to build the W1. An optional tilt
stand can also be purchased for it as well. I externalized the power switch
(included) and recommend putting the battery holder on the back of the board
for ease in changing. The power and com ports are also accessible. Here is
the link to my site: http://w8fgu.home.comcast.net/~w8fgu/enclosures.html

If this interests you, please contact me directly for a shipping quote to
your QTH.

Hope this helps.

73,
Dave W8FGU

> -----Original Message-----
> From: [hidden email] [mailto:elecraft-
> [hidden email]] On Behalf Of ON4WIX
> Sent: Friday, April 11, 2008 6:28 AM
> To: Elecraft Reflector
> Subject: [Elecraft] W1 enclosure ideas?
>
> Hi all
>
> I was just looking at the W1 watt-meter/SWR bridge specs. Since I am
> craving
> some solder fumes I thought it would be nice to build this kit, also
> because
> I have no peak reading wattmeter yet.
> I would like to install this kit into a nice enclosure that I could put
> upright or slightly slanted on my desk so all LEDs are clearly visible.
> Have
> any of you done such a thing? Any ideas and suggestions would be very
> welcome.
>
> Have a nice weekend!
>
> 73 de Glenn ON4WIX
>
> K2/100 #5361
> K3/100 #0192
> Two left hands ;-)
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com