Waterproofing cable fittings

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Waterproofing cable fittings

Jeremiah McCarthy
Even if you are careful not to stretch the tape before cutting it, it still might not cling well if you get a finger print on it or some of the sealant leaked...Putting a plastic cable tie, (ty-wrap) over the end of the wrap, or tying it off with lacing cord, the flat stuff used on aircraft cable bundles, will keep it in place...I have used both methods...The plastic ty-wraps might eventually turn brittle and break if they have tension on them, but they will last for several years...

Jerry, wa2dkg
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

RE: Waterproofing cable fittings

srife
        But be sure and use the black ty-wraps. They will last a lot longer.
The white ones don't stand up to the UV.

Stan Rife
W5EWA
Houston, TX
K2 S/N 4216
 
-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Jeremiah McCarthy
Sent: Wednesday, February 16, 2005 9:42 AM
To: [hidden email]
Subject: [Elecraft] Waterproofing cable fittings

Even if you are careful not to stretch the tape before cutting it, it still
might not cling well if you get a finger print on it or some of the sealant
leaked...Putting a plastic cable tie, (ty-wrap) over the end of the wrap, or
tying it off with lacing cord, the flat stuff used on aircraft cable
bundles, will keep it in place...I have used both methods...The plastic
ty-wraps might eventually turn brittle and break if they have tension on
them, but they will last for several years...

Jerry, wa2dkg
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: Waterproofing cable fittings

coltondunn
In reply to this post by Jeremiah McCarthy
While cable fitting you should also take care of all the safety concern. You shouldn't forget to wrap the all the wires.

cinching straps | wire tie tools