West Mountain COMSPKR Question

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

West Mountain COMSPKR Question

Dave C
Hi all,

    I know some folks on here are using the COMSPKRs with Elecrafts so I
thought I would ask a quick question.  I picked up a pair at a hamfest
today to try with my K3 but I must have been half-asleep because I didn't
catch that the power supply was not included.  I need to know what input
voltage it takes.

    The rear of the speaker says "DC IN" and I found a review on e-Ham
saying it took 9VDC in but then I took the speaker apart and the power
connection on the circuit board clearly says "AC IN".  So, I'm obviously
confused and don't want to guess at this point.  Couldn't find the answer
on West Mountain's website so thought I would ask here.  Thanks and 73,

Dave
K8JDC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: West Mountain COMSPKR Question

Dave C
I got a couple of responses off-list saying they can be run off 12VDC so
that's good enough.  Wanted to let folks know that my question was
answered.  Thanks...

Dave
K8JDC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: West Mountain COMSPKR Question

Dave C
In reply to this post by Dave C
One last follow-up.  I tried 12VDC on my speakers and I was blowing 5A
fuses.  I checked with one of the guys who wrote me off-list and he
double-checked his speakers and found they were running on 9VDC.  I tried
9VDC and that is working fine.  Just thought I should correct the earlier
info I posted.  Thanks and sorry for cluttering the list.

Dave
K8JDC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html