Xtal Socket - a bit off topic

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

Xtal Socket - a bit off topic

Ken Kaplan
I'm searching for an FT-243 crystal holder,
the type used on DX-40's, Eico 723's and a
million other 60's transmitters.

I've done a bit of searching on the internet
but no luck.

Please contact off list: [hidden email]

tnx & 73
Ken WB2ART
www.wb2art.com
www.unpcbs.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

RE: Xtal Socket - a bit off topic

Don Wilhelm-3
Ken,

If you cannot find a real crystal socket, you could use an octal tube socket
which may be a bit easier to find.
Should you decide to go the octal socket route, I can likely dig one out of
my 'old stuff' junkbox - just send me your address.

73,
Don W3FPR

> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]]On Behalf Of Ken Kaplan
> Sent: Sunday, March 05, 2006 10:12 PM
> To: [hidden email]
> Subject: [Elecraft] Xtal Socket - a bit off topic
>
>
> I'm searching for an FT-243 crystal holder,
> the type used on DX-40's, Eico 723's and a
> million other 60's transmitters.
>
> I've done a bit of searching on the internet
> but no luck.
>
> Please contact off list: [hidden email]
>
> tnx & 73
> Ken WB2ART
> www.wb2art.com
> www.unpcbs.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 268.1.2/274 - Release Date: 3/3/2006
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: Xtal Socket - a bit off topic

Ed - K9EW
In reply to this post by Ken Kaplan
If you use an octal socket, as Don suggests, you can plug in two crystals,
and switch between them - an old boatanchor trick.

73,
ed - k9ew


On 3/5/06, Ken Kaplan <[hidden email]> wrote:

>
> I'm searching for an FT-243 crystal holder,
> the type used on DX-40's, Eico 723's and a
> million other 60's transmitters.
>
> I've done a bit of searching on the internet
> but no luck.
>
> Please contact off list: [hidden email]
>
> tnx & 73
> Ken WB2ART
> www.wb2art.com
> www.unpcbs.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Reply | Threaded
Open this post in threaded view
|

Re: Xtal Socket - a bit off topic

Tom Althoff
And if you take two FT-243 xtals and tape them upside down and back to back
you can electrically switch between two crystals at a time and flip them
over mechanically for a total of 4 frequencies (if there is headroom for the
pins that will be sticking above the top of the crystal that is plugged in).

Us old farts are full of useful Hints and Kinks!

----- Original Message -----
From: "Ed - K9EW" <[hidden email]>
To: "Ken Kaplan" <[hidden email]>
Cc: <[hidden email]>
Sent: Sunday, March 05, 2006 11:45 PM
Subject: Re: [Elecraft] Xtal Socket - a bit off topic


> If you use an octal socket, as Don suggests, you can plug in two crystals,
> and switch between them - an old boatanchor trick.
>
> 73,
> ed - k9ew
>
>
> On 3/5/06, Ken Kaplan <[hidden email]> wrote:
>>
>> I'm searching for an FT-243 crystal holder,
>> the type used on DX-40's, Eico 723's and a
>> million other 60's transmitters.
>>
>> I've done a bit of searching on the internet
>> but no luck.
>>
>> Please contact off list: [hidden email]
>>
>> tnx & 73
>> Ken WB2ART
>> www.wb2art.com
>> www.unpcbs.com
>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: [hidden email]
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft
>>
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>>
>


--------------------------------------------------------------------------------


> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com