Loading... |
Reply to author |
Edit post |
Move post |
Delete this post |
Delete this post and replies |
Change post date |
Print post |
Permalink |
Raw mail |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Thus far I've only used one of my programmable function keys. (Speaker
plus phones or not.) I do about half my operating at QRP and half at ~100 W. A nice single-push toggle would be one that could swap the K3 from, for example, 5 W and 100 W. 73--Nick, WA5BDU ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Loading... |
Reply to author |
Edit post |
Move post |
Delete this post |
Delete this post and replies |
Change post date |
Print post |
Permalink |
Raw mail |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
>
> I do about half my operating at QRP and half at ~100 W. A nice > single-push toggle would be one that could swap the K3 from, for > example, 5 W and 100 W. > > 73--Nick, WA5BDU > I agree. I like to be able to go to low power to use my remote tuner. It takes quite a few turns to "crank" down to 5 watts and then return to 100 watts. 73 Rick Dettinger K7MW ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Loading... |
Reply to author |
Edit post |
Move post |
Delete this post |
Delete this post and replies |
Change post date |
Print post |
Permalink |
Raw mail |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
In reply to this post by Nick Kennedy
Rick, you can set the config item "TUN PWR" to low power for tuning
purposes. This gives a pre-set power level when pressing the "TUNE" button, settable from 0.1 Watt upwards. 73 Dave, G4AON K3/100 #80 -------------------- /I agree. I like to be able to go to low power to use my remote tuner. It takes quite a few turns to "crank" down to 5 watts and then return to 100 watts. 73 Rick Dettinger K7MW/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Loading... |
Reply to author |
Edit post |
Move post |
Delete this post |
Delete this post and replies |
Change post date |
Print post |
Permalink |
Raw mail |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
> Rick, you can set the config item "TUN PWR" to low power for tuning > purposes. This gives a pre-set power level when pressing the "TUNE" > button, settable from 0.1 Watt upwards. > > 73 Dave, G4AON > K3/100 #80 Thanks Dave and Lyle That will work very well. I guess I need to "Read The Fine Manual"! Although, with a K3, that is a moving target. 73 Rick Dettinger K7MW ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Free forum by Nabble | Edit this page |