k3 KXV3 Board Missing Pin

[Terry Schieler]

I was in the process of installing the KXV3 board in my K3.  When
plugging the 16 Pin connector on the KXV3 board into J66 on the K3, I
noticed that the third pin from the right on the KXV3 connector was
missing.  The photo appears to clearly show all 16 pins there.

Houston, do I have a problem here?
 

Thanks,

Terry, WØFM

(Please reply direct to MY CALL at arrl.net)

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[John Glascock-2]

Not at all.  I had the same question last month.  The staff says its suppose to be like that.   They are in the process of updating the documentation.

John

Terry Schieler wrote

I was in the process of installing the KXV3 board in my K3.  When
plugging the 16 Pin connector on the KXV3 board into J66 on the K3, I
noticed that the third pin from the right on the KXV3 connector was
missing.  The photo appears to clearly show all 16 pins there.

Houston, do I have a problem here?
 

Thanks,

Terry, WØFM

(Please reply direct to MY CALL at arrl.net)

_______________________________________________
Elecraft mailing list
Post to: [e-mail]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[AC7AC]

CONTENTS DELETED

The author has deleted this message.