low KX1 power w/ 3080

[Lloyd Lachow-2]

"Another thing I noticed is that I used to get 3.5W out on 30m and 3W
on 40 and 2.5 on 20 and now I get 2.5W out on 30 and 1.82W on the
other bands, measured with the DL1.
Either my LPF wasn't up to snuff in the past, or I have some other
problem. Leigh/WA5ZNU"

  Keep us posted on your findings...I have a similar issue.

LL/K3ESE
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[wayne burdick]

Hi Lloyd,

Our test units put out full power, but we do have one unit in the lab
here that has lower than normal output. Chances are we'll change the
winding instructions slightly. I'll post this information as soon as
possible.

73,
Wayne
N6KR



>   Keep us posted on your findings...I have a similar issue.
>
> LL/K3ESE


---

http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Goerg, Michael]

Hi Wayne,

Are your lab-KX1s having the 2 resistors replaced (as of the power mod)or are these standard as in the built-manual?

As I am waiting for my KX1 to arrive ;o) I want to clarify if those mods still make sense with the 3080 or should be better no more implemented.

73,
Michael, DL3DCM ..

-----Original Message-----
From: wayne burdick [mailto:[hidden email]]
Sent: Montag, 27. März 2006 21:50
To: Lloyd Lachow
Cc: List Elecraft
Subject: [Elecraft] Re: low KX1 power w/ 3080

Hi Lloyd,

Our test units put out full power, but we do have one unit in the lab here that has lower than normal output. Chances are we'll change the winding instructions slightly. I'll post this information as soon as possible.

73,
Wayne
N6KR



>   Keep us posted on your findings...I have a similar issue.
>
> LL/K3ESE


---

http://www.elecraft.com


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com