mIC gAIN GOES TO ZERO

[Jerry]

Evening all,

I was setting up N1MM with the K3 for the Virginia QSO party tomorrow when I noticed the following strange behavior.

Whenever I press any of the FKeys on N1mm (with the exception of F4 and F12), the mic gain on the K3 gets set to 1. I cannot remember this was always this way or something has changed in either N1MM or the newer K3 configuration files.

So a couple of questions before I jump over to N1MM with a bug report; has anyone else experience this problem? Any suggestions to check on the K3?

Best regards,

Jerry, W1IE (who is patiently awaiting the new Syth boards)

[Ross Primrose]

N1MM  or N1MM+?  I'm not seeing that with my K3 with N1MM+.

73, Ross N4RP

On 3/20/2015 8:58 PM, Jerry wrote:

> Evening all,
>
> I was setting up N1MM with the K3 for the Virginia QSO party tomorrow when I
> noticed the following strange behavior.
>
> Whenever I press any of the FKeys on N1mm (with the exception of F4 and
> F12), the mic gain on the K3 gets set to 1. I cannot remember this was
> always this way or something has changed in either N1MM or the newer K3
> configuration files.
>
> So a couple of questions before I jump over to N1MM with a bug report; has
> anyone else experience this problem? Any suggestions to check on the K3?
>
> Best regards,
>
> Jerry, W1IE (who is patiently awaiting the new Syth boards)
>
>
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/mIC-gAIN-GOES-TO-ZERO-tp7600488.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

--
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[w0mu]

You need to visit the N1MM reflector.

Is there a command to set Mic gain to zero?

You probably have a corrupt file.

Mike W0MU

On 3/20/2015 8:11 PM, Ross Primrose wrote:

> N1MM or N1MM+?  I'm not seeing that with my K3 with N1MM+.
>
> 73, Ross N4RP
>
> On 3/20/2015 8:58 PM, Jerry wrote:
>> Evening all,
>>
>> I was setting up N1MM with the K3 for the Virginia QSO party tomorrow
>> when I
>> noticed the following strange behavior.
>>
>> Whenever I press any of the FKeys on N1mm (with the exception of F4 and
>> F12), the mic gain on the K3 gets set to 1. I cannot remember this was
>> always this way or something has changed in either N1MM or the newer K3
>> configuration files.
>>
>> So a couple of questions before I jump over to N1MM with a bug
>> report; has
>> anyone else experience this problem? Any suggestions to check on the K3?
>>
>> Best regards,
>>
>> Jerry, W1IE (who is patiently awaiting the new Syth boards)
>>
>>
>>
>>
>>
>>
>> --
>> View this message in context:
>> http://elecraft.365791.n2.nabble.com/mIC-gAIN-GOES-TO-ZERO-tp7600488.html
>> Sent from the Elecraft mailing list archive at Nabble.com.
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[kc9ee.]

Jerry, did find a resolution to this? I'm 99% cw so never noticed this before. My K3 is doing this with N1MM+. Decided to work the new Phone Fray. That's when I found it.

73,

Gary KC9EE