monitoring your own transmitted RTTY text

[WW3S]

Trying to help a RTTY newbie setup his Microkeyer II to his K3, we had everything working in NAQP except whatever he sent was not visible in the digi window of MM+. We noticed it scrolled by in the microkeyer window, but a nusiance to try to keep your eyes on the screen and the keyer......I noticed a post about the recent K3 firmware, but Ed doesn’t have that installed in his K3.....is there a setting or something we missed? With my microkeyer, I didn’t have to do anything, what I sent was automagically captured in the digi window.....

73, Jamie WW3S
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

Is "Sound Loopback" set to "Int" on the MMTTY Config | Misc tab *and*
TX Port set to "Sound + COM-TxD (FSK)?  That should allow MMTTY to
monitor transmission regardless of the transceiver in use.

I'm not sure that all versions of the K3/K3S firmware echo "Monitor"
to the Line Out.  Is Monitor enabled (Mon level = 8 to 10 at least)
on the "newie's" K3?

73,

    ... Joe, W4TV


On 7/16/2016 9:08 PM, Jamie WW3S wrote:

> Trying to help a RTTY newbie setup his Microkeyer II to his K3, we had everything working in NAQP except whatever he sent was not visible in the digi window of MM+. We noticed it scrolled by in the microkeyer window, but a nusiance to try to keep your eyes on the screen and the keyer......I noticed a post about the recent K3 firmware, but Ed doesn’t have that installed in his K3.....is there a setting or something we missed? With my microkeyer, I didn’t have to do anything, what I sent was automagically captured in the digi window.....
>
> 73, Jamie WW3S
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Jamie,

I think we are talking about display on a computer screen rather than
some function of the K3.

I would suggest that the best answer would come from the support forums
of the software involved rather than from the K3 reflector.

If there is K3 interaction, then your friend should upgrade to the
latest K3 firmware to keep up with the latest.  You did not state just
how downlevel his firmware might be - that might be important.

Soapbox ON ---
I do not know why some owners are reluctant to download the latest
firmware upgrades.  Beta versions may be a concern, but those which are
promoted to production level are safe.  K3 Utility makes it a snap to
download the latest production firmware, it is just a click of a few
buttons.
If something like a computer glitch happens during the firmware upgrade,
it is easily fixed by the "Force Firmware Download" instructions in the
manual and the K3 Utility help file.

Soapbox OFF.

73,
Don W3FPR

On 7/16/2016 9:08 PM, Jamie WW3S wrote:
> Trying to help a RTTY newbie setup his Microkeyer II to his K3, we had everything working in NAQP except whatever he sent was not visible in the digi window of MM+. We noticed it scrolled by in the microkeyer window, but a nusiance to try to keep your eyes on the screen and the keyer......I noticed a post about the recent K3 firmware, but Ed doesn’t have that installed in his K3.....is there a setting or something we missed? With my microkeyer, I didn’t have to do anything, what I sent was automagically captured in the digi window.....
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]