no audio sidetone for CW

[John Wiener]

I recently had a glitch with the ATU going out of "Auto" mode but  
before I figured it out, I hard reset my K2.

I have since gone back and recal'd PLL and filter settings and  
readjusted S-meter.

I now do not get a CW sidetone on transmit.  Adjustments to St L  and  
St P result in muted audio.

Any suggestions?

Thanks!

John
AB8O
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Ron D'Eau Claire-2]

The reset gave you the wrong source for the sidetone. It's selected in the
MENU.

MENU -> St L -> MENU (to enable the sidetone level set), then tap DISPLAY.
It'll toggle between the two sidetone sources, U6-25 and U8-4. Since you
don't have sidetone now, one tap should restore it.

Ron AC7AC

-----Original Message-----



I recently had a glitch with the ATU going out of "Auto" mode but  
before I figured it out, I hard reset my K2.

I have since gone back and recal'd PLL and filter settings and  
readjusted S-meter.

I now do not get a CW sidetone on transmit.  Adjustments to St L  and  
St P result in muted audio.

Any suggestions?

Thanks!

John
AB8O
_

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

John,

You need to change the sidetone source in the menu.

Enter the menu for ST L, edit the parameter, then tap the DISPLAY button
until you hear sidetone.

73,
Don W3FPR

> -----Original Message-----
>
> I recently had a glitch with the ATU going out of "Auto" mode but
> before I figured it out, I hard reset my K2.
>
> I have since gone back and recal'd PLL and filter settings and
> readjusted S-meter.
>
> I now do not get a CW sidetone on transmit.  Adjustments to St L  and
> St P result in muted audio.
>
> Any suggestions?
>
> Thanks!
>
> John
> AB8O
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com