|
Is there a K4 or 1500 watt amplifier on the horizon?
Fred, K3BHX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
Until either of those products are actually "close enough" to release to
take orders, the answer will always be no. That's just the way it is. (This in no way should imply that either is in actual development). 73, Bruce N1RX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by fserota
Yeah! When the Cows come home to roost!
((((73)))) Milverton / W9MMS. From: Fred Serota <[hidden email]> To: [hidden email] Sent: Monday, March 30, 2015 3:14 PM Subject: [Elecraft] Is there a K4 on the horizon? Is there a K4 or 1500 watt amplifier on the horizon? Fred, K3BHX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
Be nice to hear of a KM3....
Mobile transceiver maybe with HF/6/VHF/UHF capsbility. Anyone serious about a mobile setup would much prefer a dedicated transceiver over trying to use a kx3 which has some major obstacles when installing it for mobile use. The k3 is a bit to large in many instances and the kx3 has its own unique issues needing to be addressed for safety as well as neatness of the installation. Just sayin..... 73 Gary Vk1ZZ K3, KPA500-FT, KAT500-FT On 31/03/2015 9:04 AM, "Milverton M. Swire via Elecraft" < [hidden email]> wrote: > Yeah! When the Cows come home to roost! > > ((((73)))) Milverton / W9MMS. > From: Fred Serota <[hidden email]> > To: [hidden email] > Sent: Monday, March 30, 2015 3:14 PM > Subject: [Elecraft] Is there a K4 on the horizon? > > Is there a K4 or 1500 watt amplifier on the horizon? > > Fred, K3BHX > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by fserota
No guarantees, but I understand that Elecraft may be making a new
product announcement at IDXC in Visalia at the new product showcase on April 18th. I don't guarantee to be there, as this forum is scheduled for 0830-0930L. :-) Last time I got excited about the announcement of a new product, it was at the Dayton Hamvention, 2013. Turned out that Ten-Tec introduced their new programmable QRP radio. Did nothing for me. Then again, just when I thought I owned everything that I needed from Elecraft, Eric motioned me over at IDXC 2014 and showed me the new PX3. Of course, I now own one of those, as well. 73 de Jim - AD6CW On 3/30/2015 1:14 PM, Fred Serota wrote: > Is there a K4 or 1500 watt amplifier on the horizon? > > Fred, K3BHX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by Gary Gregory-2
Sadly, "neatness of the installation" has never made it onto my
"installation radar screen." Just look behind my "wireless." 73, Fred K6DGW - Northern California Contest Club - CU in the 50th Running of the Cal QSO Party 3-4 Oct 2015 - www.cqp.org On 3/30/2015 5:05 PM, Gary Gregory wrote: > The k3 is a bit to large in many instances and the kx3 has its own unique > issues needing to be addressed for safety as well as neatness of the > installation. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by Gary Gregory-2
I'm 100% in agreement with you Gary.
Announce a Mobile Radio ( Elecraft KXM3 ) and I'll be the first one standing on the Street Corner robbing the proverbial " Lil Ole Lady " ((((73))) Milverton / W9MMS. From: Gary Gregory <[hidden email]> To: Milverton M. Swire <[hidden email]> Cc: Fred Serota <[hidden email]>; Elecraft List <[hidden email]> Sent: Monday, March 30, 2015 7:05 PM Subject: Re: [Elecraft] Is there a K4 on the horizon? Be nice to hear of a KM3....Mobile transceiver maybe with HF/6/VHF/UHF capsbility.Anyone serious about a mobile setup would much prefer a dedicated transceiver over trying to use a kx3 which has some major obstacles when installing it for mobile use.The k3 is a bit to large in many instances and the kx3 has its own unique issues needing to be addressed for safety as well as neatness of the installation.Just sayin.....73Gary Vk1ZZ K3, KPA500-FT, KAT500-FTOn 31/03/2015 9:04 AM, "Milverton M. Swire via Elecraft" <[hidden email]> wrote: Yeah! When the Cows come home to roost! ((((73)))) Milverton / W9MMS. Â Â Â From: Fred Serota <[hidden email]> Â To: [hidden email] Â Sent: Monday, March 30, 2015 3:14 PM Â Subject: [Elecraft] Is there a K4 on the horizon? Is there a K4 or 1500 watt amplifier on the horizon? Fred, K3BHX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
Last year at IDXC, I decided to take a chance during a forum that Eric
was presenting, to put in a good word for an all-mode VHF/UHF transceiver. I brought up the point that Elecraft already sells transverters for 2m/222 MHz/432 MHz, so they have the technology. Unfortunately, it comes down to whether the product would have sufficient appeal to justify the R&D costs. Well, I tried! 73 de Jim - AD6CW On 3/30/2015 5:30 PM, Milverton M. Swire via Elecraft wrote: > I'm 100% in agreement with you Gary. > Announce a Mobile Radio ( Elecraft KXM3 ) and I'll be the first one > standing on the Street Corner robbing the proverbial " Lil Ole Lady " > > ((((73))) Milverton / W9MMS. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by Jim Low man
Well here is hoping for the long awaited TX module for the P3.
Hopefully it will appear on the WEB site for ordering at the same time. I really want to retire my old Heath SB610. It is my last in use hollow state device. 73, Bob K2TK ex KN2TKR (1956) & K2TKR On 3/30/2015 8:09 PM, Jim Lowman wrote: > No guarantees, but I understand that Elecraft may be making a new product > announcement at IDXC in Visalia at the new product showcase on April 18th. > > > > Then again, just when I thought I owned everything that I needed from Elecraft, > Eric motioned me over at IDXC 2014 and showed me the new PX3. > Of course, I now own one of those, as well. > > 73 de Jim - AD6CW > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
Well i dont see where a huge budget is needed for a mobile version of the
k3. Remote the box, single rcvr, minimum hardware and a 100w pa. Remote head should not be too hard to come up with? The competition is pretty darn ordinary..... 73 Gary Vk1ZZ K3, KPA500-FT, KAT500-FT On 31/03/2015 11:09 AM, "Bob" <[hidden email]> wrote: > Well here is hoping for the long awaited TX module for the P3. > > Hopefully it will appear on the WEB site for ordering at the same time. I > really want to retire my old Heath SB610. It is my last in use hollow > state device. > > 73, > Bob > K2TK ex KN2TKR (1956) & K2TKR > > > On 3/30/2015 8:09 PM, Jim Lowman wrote: > >> No guarantees, but I understand that Elecraft may be making a new product >> announcement at IDXC in Visalia at the new product showcase on April 18th. >> >> >> >> Then again, just when I thought I owned everything that I needed from >> Elecraft, >> Eric motioned me over at IDXC 2014 and showed me the new PX3. >> Of course, I now own one of those, as well. >> >> 73 de Jim - AD6CW >> >> ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
Ahem, if you want to go that route it's already available! Take a K3 +
K3/0 mini for the cockpit. ;-) 73, Olli Contest, DX & radio projects: http://www.dh8bqa.de Am 31.03.2015 um 04:18 schrieb Gary Gregory: > Well i dont see where a huge budget is needed for a mobile version of the > k3. > > Remote the box, single rcvr, minimum hardware and a 100w pa. > > Remote head should not be too hard to come up with? > > The competition is pretty darn ordinary..... > > 73 > > Gary > Vk1ZZ > K3, KPA500-FT, KAT500-FT > On 31/03/2015 11:09 AM, "Bob" <[hidden email]> wrote: > >> Well here is hoping for the long awaited TX module for the P3. >> >> Hopefully it will appear on the WEB site for ordering at the same time. I >> really want to retire my old Heath SB610. It is my last in use hollow >> state device. >> >> 73, >> Bob >> K2TK ex KN2TKR (1956) & K2TKR >> >> >> On 3/30/2015 8:09 PM, Jim Lowman wrote: >> >>> No guarantees, but I understand that Elecraft may be making a new product >>> announcement at IDXC in Visalia at the new product showcase on April 18th. >>> >>> >>> >>> Then again, just when I thought I owned everything that I needed from >>> Elecraft, >>> Eric motioned me over at IDXC 2014 and showed me the new PX3. >>> Of course, I now own one of those, as well. >>> >>> 73 de Jim - AD6CW >>> >>> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
Securing the current hardware from becoming an unguided cockpit missile is
not easy and rather ugly.... Gary Vk1ZZ K3, KPA500-FT, KAT500-FT On 31/03/2015 6:30 PM, "Oliver Dröse" <[hidden email]> wrote: > Ahem, if you want to go that route it's already available! Take a K3 + > K3/0 mini for the cockpit. ;-) > > 73, Olli > > Contest, DX & radio projects: http://www.dh8bqa.de > > > Am 31.03.2015 um 04:18 schrieb Gary Gregory: > >> Well i dont see where a huge budget is needed for a mobile version of the >> k3. >> >> Remote the box, single rcvr, minimum hardware and a 100w pa. >> >> Remote head should not be too hard to come up with? >> >> The competition is pretty darn ordinary..... >> >> 73 >> >> Gary >> Vk1ZZ >> K3, KPA500-FT, KAT500-FT >> On 31/03/2015 11:09 AM, "Bob" <[hidden email]> wrote: >> >> Well here is hoping for the long awaited TX module for the P3. >>> >>> Hopefully it will appear on the WEB site for ordering at the same time. I >>> really want to retire my old Heath SB610. It is my last in use hollow >>> state device. >>> >>> 73, >>> Bob >>> K2TK ex KN2TKR (1956) & K2TKR >>> >>> >>> On 3/30/2015 8:09 PM, Jim Lowman wrote: >>> >>> No guarantees, but I understand that Elecraft may be making a new >>>> product >>>> announcement at IDXC in Visalia at the new product showcase on April >>>> 18th. >>>> >>>> >>>> >>>> Then again, just when I thought I owned everything that I needed from >>>> Elecraft, >>>> Eric motioned me over at IDXC 2014 and showed me the new PX3. >>>> Of course, I now own one of those, as well. >>>> >>>> 73 de Jim - AD6CW >>>> >>>> ______________________________________________________________ >>>> >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[hidden email] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to [hidden email] >>> >>> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by Jim Low man
Hmm, never thought of Visalia, I was thinking Dayton.
3/30/2015 5:09 PM, Jim Lowman wrote: > No guarantees, but I understand that Elecraft may be making a new product > announcement at IDXC in Visalia at the new product showcase on April 18th. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
The K3 was announced at Visalia while simultaneously being announced at
Ozarkcon. I was in Tom Hammond's hotel room when he got permission to tell me about it and then gave me the original design documents. Later he announced the new rig to the rest of the crowd. Kevin. KD5ONS On 3/31/2015 6:50 AM, Wes (N7WS) wrote: > Hmm, never thought of Visalia, I was thinking Dayton. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
Okay. Good to know I don't have to wait so long. Too bad it's on the downslope of the sunspot cycle.
On Mar 31, 2015, at 7:21 AM, "[hidden email]" <[hidden email]> wrote: > The K3 was announced at Visalia while simultaneously being announced at Ozarkcon. I was in Tom Hammond's hotel room when he got permission to tell me about it and then gave me the original design documents. Later he announced the new rig to the rest of the crowd. > Kevin. KD5ONS > > On 3/31/2015 6:50 AM, Wes (N7WS) wrote: >> Hmm, never thought of Visalia, I was thinking Dayton. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by Wes (N7WS)
On Tue,3/31/2015 6:50 AM, Wes (N7WS) wrote:
> Hmm, never thought of Visalia, I was thinking Dayton. You should -- it's a great hangout, Starbucks within walking distance, and your presence would add to it. 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
IDXC is a one-of-a-kind gathering of DXers, as far as I know.
These guys are serious, and not afraid to spend money. IDXC attracts ~ 800 hard-core DXers each year. When US Tower was located in Visalia, they would have an open house to coincide with IDXC. It was not uncommon to see folks open their checkbooks and credit cards and spend some big money. 73 de Jim - AD6CW On 3/31/2015 9:14 AM, Jim Brown wrote: > On Tue,3/31/2015 6:50 AM, Wes (N7WS) wrote: >> Hmm, never thought of Visalia, I was thinking Dayton. > > You should -- it's a great hangout, Starbucks within walking distance, > and your presence would add to it. > > 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
On Tue,3/31/2015 9:38 AM, Jim Lowman wrote:
> IDXC is a one-of-a-kind gathering of DXers, as far as I know. > These guys are serious, and not afraid to spend money. > > IDXC attracts ~ 800 hard-core DXers each year. Visalia is also a contester hangout. NCCC does a Contest Academy on Friday. 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by Jim Brown-10
Thanks, but I was there once. Sat next to W6KPC at the banquet. Shows how long
ago that was. On 3/31/2015 9:14 AM, Jim Brown wrote: > On Tue,3/31/2015 6:50 AM, Wes (N7WS) wrote: >> Hmm, never thought of Visalia, I was thinking Dayton. > > You should -- it's a great hangout, Starbucks within walking distance, and > your presence would add to it. > > 73, Jim K9YC > ______________________________________________________________ > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by Jim Brown-10
Hmm .. contester hangout vs. Starbucks: Which has
the greatest appeal? :-) 73, Phil W7OX On 3/31/15 9:52 AM, Jim Brown wrote: > On Tue,3/31/2015 9:38 AM, Jim Lowman wrote: >> IDXC is a one-of-a-kind gathering of DXers, as >> far as I know. >> These guys are serious, and not afraid to spend >> money. >> >> IDXC attracts ~ 800 hard-core DXers each year. > > Visalia is also a contester hangout. NCCC does a > Contest Academy on Friday. > > 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
| Free forum by Nabble | Edit this page |
