SSB Net results (1/18/09)
Locked
1 ...
345678
1 ...
345678
 
|
I have K3 s/n 1826 that I love. I just installed a KXV3 (not KXV3A) I/F
adapter. The problem is that when I try to do the Milliwatt TX Gain Calibration procedure, I get errors. I connected a dummy load to the XVTR jack and put the KXV3 into TEST mode. The procedure looks fine on 160 M, yielding 1.00 mW. The other bands give low or 0.00 readings and return the TXG error. Am I doing something wrong? Should I have clipped the W1 and W2 jumpers on the RF PCB? Thanks for your help. 73, Phil, NS7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Phil,
Yes, you should have clipped those jumpers. If they are not clipped the results will be as you describe (guess how I know). 73, Don W3FPR On 12/27/2010 6:23 PM, Phillip Shepard wrote: > I have K3 s/n 1826 that I love. I just installed a KXV3 (not KXV3A) I/F > adapter. The problem is that when I try to do the Milliwatt TX Gain > Calibration procedure, I get errors. I connected a dummy load to the XVTR > jack and put the KXV3 into TEST mode. The procedure looks fine on 160 M, > yielding 1.00 mW. The other bands give low or 0.00 readings and return the > TXG error. Am I doing something wrong? Should I have clipped the W1 and W2 > jumpers on the RF PCB? Thanks for your help. > > 73, > > Phil, NS7P > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Elecraft SSB Net results (1-2-11)
|
|
In reply to this post by Phil Shepard
We had a difficult net today. Propagation didn't seem that great, and we
were bothered quite a bit by QRM from 14.313 MHz. After a few minutes, we QSYed to 14.315 MHz to get away from the QRM, but it was still a problem. As it was, we had 15 participants over a 20 minute period. Thanks to everyone who checked in. Ken, KO5Y, in NM will be the NCS next week. Happy New Year. Here is a list of the participants: Station Name QTH Rig S/N K6EQ Roger CA K3 4629 K4TM Cary VA K3 3448 W0FM Terry MO K3 474 KO5Y Ken NM K3 4442 W4RKS Jim AL K3 3618 K0JWC Jim MN K3 3447 K4GCJ Gerry NC K3 1597 KD1TH Paul NH K3 4882 N9EF Robert IL K3 4411 W5ETJ Gary TX K3 3227 W8YMO Harry OH K3 166 AC0NM Glenn CA K3 2843 K8EAG Gil MI K3 99 ZL1PWD Peter NZ K3 139 NS7P Phil OR K3 1826 73, Phil, NS7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Hi,
Isn't it time to try to find a new frequency? I always have QRM from *both* 14313 and 14316. There are always politicos on 14313. In one of the earliest nets, it was moved to 14310 which was very good here. AB2TC - Knut
|
Elecraft SSB Net results (1-30-11)
|
|
In reply to this post by Phil Shepard
We had a small net today, with only 19 of us over a 21 minute net.
Discussion was on the ALC function and an Icom solid state amp, and a query for more news about the KPA-500. Thanks to everyone who checked in. Here is a list of the participants: Station Name QTH Rig S/N W4PFM Paul VA K3 1673 W0CZ Ken ND K3 457 K4GCJ Gerry NC K3 1597 K8EAG Gil MI K3 99 W4RKS Jim AL K3 3618 K6VWE Stan MI K3 650 N7HTS Gary WY K2 6113 NV5E Rob TX K3 1417 KD1TH Paul NH K3 4882 K6EQ Roger CA K3 4629 WB8RAE Bill NY K3 2389 AE5JD Bart TX K3 2106 WO1I Dick MA K3 911 W1QS John ME K3 2274 WB9JNZ Eric IL K3 4017 W7NMD Palmer AR K3 3779 K7VED Gary WA K3 4628 AB7CE Roy MT K2 40 NS7P Phil OR K3 1826 73, Phil, NS7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Propagation seemed poor in AZ. Usually Phil is 59 and I couldn't hear him hardly at all. Relay stations and most others were not too strong either so I didn't check in.
John N1JM K3 #2555 |
Elecraft SSB Net results (2-6-10)
|
|
In reply to this post by Phil Shepard
We had a good net this morning with 31 participants over a 24 minute period.
There was some splatter from 316 for the first half of the net, but we managed OK. We had five K2s this week, two of them QRP! Here is the list of participants. Station Name QTH Rig S/N WB6CLZ Mike CA K3 4522 W8OV Dave TX K3 3139 KO5Y Ken NM K2 7095 K6EQ Roger CA K3 4629 W7QHD Kurt AZ K2 1538 W0RSR Mike CO K2 5767 W5ETJ Gary TX K3 3227 K4GCJ Gerry NC K3 1597 W7NMD Palmer AR K3 3779 K4TM Cary VA K3 3448 W8YMO Harry OH K3 166 W4PFM Paul VA K3 1673 K6DSW Don CA K3 3138 KA1OZ Dick MA K3 859 W4RKS Jim AL K3 3618 AE6IC Fred CA K3 2241 KA0NCR Arnie NE K3 185 K6UO Norm CA K3 755 KD1TH Paul NH K3 4882 AE6RH Ron CA K3 1997 WB9JNZ Eric IL K3 4017 W0NTA Dick CO K3 1208 KE5GBC Mike TX K3 5047 KE4WY Jim KY K3 4864 ZL1PWD Peter NZ K3 139 AB7CE Roy MT K2 40 QRP KB3FBR Joe PA K2 6178 QRP K0CRT Chuck CO Kenwood K8DJC Nelson OH K3 560 KE5MO Larry TX K3 4499 NS7P Phil OR K3 1826 73, Phil, NS7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Elecraft SSB Net results (2-13-10)
|
|
We had a good net this morning with 36 participants over a 33 minute period.
QRM was not a problem, and most stations were strong in Oregon. We again had five K2s this week, two of them QRP! We had a father and son, as well as an OM and XYL checkin. Discussions were on filter selection for new K3 users and the KPA500 details. Here is the list of participants. Station Name QTH Rig S/N WB6CLZ Mike CA K3 4522 OM WB6CIN Cindy CA K3 4522 XYL W6VY Bob CA K3 2765 K2RP Ron CA HW32 N2HMM John NJ K3 5033 K6EQ Roger CA K3 4629 AE6IC Fred CA K3 2241 father KJ6JUS Eric CA K3 2241 son K6UO Norm CA K3 755 AE6RH Ron CA K3 1997 N8RT Rob GA K3 4816 WB9JNZ Eric IL K3 4017 W0RSR Mike CO K2 5767 K8DJC Nelson OH K3 560 K0JWC Jim MN K3 3447 N1EU Barry NY K3 300 K4GCJ Gerry NC K3 1597 W1DFB Don MA K3 2937 VE6NPK Neil AB FT767 N1LQ Dave MA K3 371 KD1TH Paul NH K3 4882 W8OV Dave TX K3 3139 W8YMO Harry OH K3 166 KB3FBR Joe PA K2 6178 QRP W4RKS Jim AL K3 3618 K8EAG Gil MI K3 99 AB7CE Roy MT K2 40 QRP W7QHD Kurt AZ K2 1538 KC5RY George TX TS440 WD8MNG Bill OH K3 1063 KO5Y Ken NM K2 7095 W8UJM Al OH FT920 AE4UTQ Wade TN Paragon W7NMD Palmer AR K3 3779 W8FU Bruce OH K3 2516 NS7P Phil OR K3 1826 73, Phil, NS7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Elecraft SSB Net results (2-20-11)
|
|
The net got off to a slow start due to the terrible QRM from 14.313 and the
refuse taking over that frequency today. Rather than fight it, we moved to 14.316 MHz and were much better off. We'll see how the situation is next week and see if we need to move again. Propagation was OK, and we had three DX check-ins (DK1, EI6 and ZL1). We were also bothered a bit by pulsed QRM of some kind but worked through it. We had 30 participants over a 34 minute period, with six K2s. The discussions were on the KPA500 - Brendan, EI6IZ, is field testing the amp and shared his feedback with us. Here is the list of participants. Station Name QTH Rig S/N WB6CLZ Mike CA K3 4522 KO5Y Ken NM K2 7095 K6EQ Roger CA K3 4629 W2RWA Dick NY K3 2603 W4RKS Jim AL K3 3618 KE4WY Jim KY K3 4864 K8EAG Gil MI K3 99 AD5SX Paul NM K3 4645 W6VY Bob CA K3 2765 K8DJC Nelson OH K3 560 W0RSR Mike CO K2 5767 K4GCJ Gerry NC K3 1597 W9EJB Ed IN K3 1593 W7NMD Palmer AR K3 3779 AB2TC Knut NY K3 81 W7QHD Kurt AZ K2 1538 W8YMO Harry OH K3 166 KI0TF Mike ND TS940 N1IRB Scott CT K3 4555 DK1IP Wolf DK K3 1135 AB7CE Roy MT K2 40 QRP KD1TH Paul NH K3 4882 KB3FBR Joe PA K2 6178 QRP ZL1PWD Peter ZL K3 139 KE5MO Larry TX K3 4499 W5ETJ Gary TX K3 3227 EI6IZ Brendan EI K3 39 AC7SB Peter WA K2 3016 N1LQ Dave MA K3 371 NS7P Phil OR K3 1826 73, Phil, NS7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Elecraft SSB Net results (2-27-11)
|
|
Propagation was mixed - some stations were strong but many were weaker than
they usually are. We did have two DX check-ins (EI6 and ZL1). We had 35 participants over a 37 minute period. The discussions were on the hardware requirements for diversity receive in the shortwave broadcast bands. There was one check-in who seemed to be asking provoking questions. He may not actually be licensed. Here is the list of participants. Station Name QTH Rig S/N AD5SX Paul NM K2 7095 N1YX Igor MA K3 4653 W2RWA Dick NY K3 2603 KE4WY Jim KY K3 4864 KC5RY George TX K3 5208 WB9JNZ Eric IL K3 4017 EI6IZ Brendan EI K3 39 K4GCJ Gerry NC K3 1597 W7NMD Palmer AR K3 3779 KD1TH Paul NH K3 4882 K6EQ Roger CA K3 4629 N0YB Larry IA K3 3435 WB8ENE Art OH K3 4319 W9EJB Ed IN K3 1593 N6JW John CA K3 936 and K2 3290 K8EAG Gil MI K3 99 W0CZ Ken ND K3 457 W8YMO Harry OH K3 166 WA1BHV Dave VT IC718 Not in QRZ.com database! W5ETJ Gary TX K3 3227 KC9FAT Jeff IL K3 4436 AI4VZ George GA K3 2412 N1IRB Scott CT K3 4555 AE6IC Fred CA K3 2241 K6UO Norm CA K3 755 W6VY Bob CA K3 2765 AB7CE Roy MT K2 40 QRP N1EU Barry NY Corsair KB0YH Gus CO K3 441 KA0NCR Arnie NE K3 185 ZL1PWD Peter ZL K3 139 WD8MNG Bill OH K3 1063 K3WOW Gary PA K3 KG8YT Bruce MI K3 5201 NS7P Phil OR K3 1826 73, Phil, NS7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
He is licensed but obviously has been banished from QRZ.COM. Google his call and you'll see why.
AB2TC - Knut
|
Elecraft SSB Net results (3-6-11)
|
|
In reply to this post by Phil Shepard
Conditions weren't great, but they could have been worse. Many stations
were experiencing QRM from the contest. We had 19 participants over a 17 minute net, with no discussions. Thank you to all who hung in there. Here is the list of participants. Station Name QTH Rig S/N AD0NM Glenn CA K3 2843 K6EQ Roger CA K3 4629 KE4WY Jim KY K3 4864 W4RKS Jim AL K3 3618 W8OV Dave TX K3 3139 W7NMD Palmer AR K3 3779 W0RSR Mike CO K2 5767 KA0NCR Arnie NE K3 185 N2HMM John NJ K3 5033 W8YMO Harry OH K3 166 K8EAG Gil MI K3 99 W7QHD Kurt AZ K3 1538 W2RWA Dick NY K3 2603 KE7WRV Alan AZ FT897D N1OXA Ivan ME K3 4538 N6DB Rebar CA K3 3680 AB7CE Roy MT K2 40 QRP KC5RY George TX K3 5208 NS7P Phil OR K3 1826 73, Phil, NS7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Re: Elecraft SSB Net results (3-6-11)
|
|
*Nothing* heard in FL.
73, Mike NF4L On 3/6/2011 3:50 PM, Phillip Shepard wrote: > Conditions weren't great, but they could have been worse. Many stations > were experiencing QRM from the contest. We had 19 participants over a 17 > minute net, with no discussions. Thank you to all who hung in there. Here > is the list of participants. > > Station Name QTH Rig S/N > > AD0NM Glenn CA K3 2843 > K6EQ Roger CA K3 4629 > KE4WY Jim KY K3 4864 > W4RKS Jim AL K3 3618 > W8OV Dave TX K3 3139 > W7NMD Palmer AR K3 3779 > W0RSR Mike CO K2 5767 > KA0NCR Arnie NE K3 185 > N2HMM John NJ K3 5033 > W8YMO Harry OH K3 166 > K8EAG Gil MI K3 99 > W7QHD Kurt AZ K3 1538 > W2RWA Dick NY K3 2603 > KE7WRV Alan AZ FT897D > N1OXA Ivan ME K3 4538 > N6DB Rebar CA K3 3680 > AB7CE Roy MT K2 40 QRP > KC5RY George TX K3 5208 > NS7P Phil OR K3 1826 > > 73, > > Phil, NS7P > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Elecraft SSB Net results (3-20-11)
|
|
In reply to this post by Phil Shepard
Well, we started the net on 14.314 (our usual frequency). We quickly drew
heavy QRM, with harangues to get off of "their" frequency. I got about 8 of our stronger stations checked in, but the situation was deteriorating quickly. I looked up band, found quiet at 14.317 and took the net there. After a minute of being told to stay there and not come back to their frequency, we were left alone. It went well after that and we had 37 participants over the total 30 minutes. I think finding a new frequency is the best course of action - maybe in the 14.316 to 14.320 area. Here is the list of participants. Station Name QTH Rig S/N KO5Y Ken NM K3 4442 K6EQ Roger CA K3 4629 AD5SX Paul NM K3 4645 KE4WY Jim KY K3 4864 W7QHD Kurt AZ K2 1538 W4RKS Jim AL K3 3618 K4GCJ Gerry NC K3 1597 N1JM John AZ K3 2555 NZ0T Bill KS K3 1502 K8DJC Nelson OH K3 560 W8YMO Harry OH K3 166 W2RWA Dick NY K3 2603 AI4VZ George GA K3 2412 NT5Q Don TX K3 4179 NF8J Paul MI K3 758 K4CCH Charles GA K3 3509 K5MEC Dave OK TS440 (W8OV at club station) W0FM Terry MO K3 474 KK7P Lyle WA K3 3036 N5VEZ/m Mike MS W0CZ Ken ND K3 457 K5LAD Jim OK K3 1068 N1LQ Dave MA Omni 5 W6VY Bob CA K3 2765 KB3FBR Joe PA K2 6178 QRP KC5EFM/m Art NM IC706 AC0NM Glenn CA K3 2843 WB9JNZ Eric IL K3 4017 KL7UW Ed AK K3 4340 N1RX Bruce NH K3 559 N5ZM Earl AR K3 3223 KD1TH Paul NH K3 4882 WB8ENE Art OH K3 4319 W5ETJ Gary TX K3 3227 WA5BDU Nick AR K3 1195 W9DVM Phil FL K3 1605 NS7P Phil OR K3 1826 73, Phil, NS7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Elecraft SSB Net results (4-10-11)
|
|
It was good to be back with the net this week. Thanks again to Ken, KO5Y,
for taking over the net in my absence. Propagation was OK to some areas, but not as good to others. The new frequency (14.316) seems to be working out. We had 32 participants over a 25 minute period. There is lots of buzz about the new KPA500. Here is the list of participants. Station Name QTH Rig S/N W4PFM Paul VA K3 1673 K4GCJ Gerry NC K3 1597 WO1I Dick MA K3 911 KE4WY Jim KY K3 4864 KO5Y Ken NM K3 4442 AD5SX Paul NM K3 4645 K5LAD Jim OK K3 1068 W0RSR Mike CO K2 5767 K6EQ Roger CA K3 4629 AC0NM Glenn CA K3 2843 W4RKS Jim AL K3 3618 K8EAG Gil MI K3 99 W8YMO Harry OH K3 166 W9DVM Phil FL K3 1605 W6GF George CA K3 4452 KC5RY George TX K3 5208 K2UE Clyde NY K3 5323 K8TOB Bob OH K3 5144 N1JM John AZ K3 2555 WB6CLZ Mike CA K3 4522 AI4VZ George GA K3 2412 W8OV Dave TX K3 3139 W5ETJ Gary TX K3 3227 N1LQ Dave MA K3 371 W6UO Norm CA K3 755 NT5Q Don TX K3 4179 W6VY Bob CA K3 2765 AB7CE Roy MT K2 40 KF7BCG/AG Rick NV FT847 WB0RRU David CO IC720A ? K1ZW Larry NC K3 5185 NS7P Phil OR K3 1826 73, Phil, NS7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Elecraft SSB Net results (4-17-11)
|
|
Propagation was OK. Nothing too long however. The frequency (14.316 MHz)
was plagued by some type of pulsed QRM - short pulses at about a 2 second interval, about S6 here in Oregon with my antenna pointed east. I was able to copy through it without too much trouble. We had 25 participants over a 21 minute period. Here is the list of participants. Station Name QTH Rig S/N WB6CLZ Mike CA K3 4522 W6CG Dick CA K3 3697 N6JW John CA K3 936 W0RSR Mike CO K2 5767 K4GCJ Gerry NC K3 1597 KO5Y Ken NM K3 4442 NF4L Mike FL K3 3935 KE4WY Jim KY K3 4864 KA0NCR Arnie NE K3 185 NT5Q Don TX K3 4179 AC0NM Glenn CA K3 2843 W4RKS Jim AL K3 3618 K5OAI Sam TX K3 4123 W2RWA Dick NY K3 2603 W4PFM Paul VA K3 1673 W8OV Dave TX K3 3139 N0RIE Gene CA FT100D KG8YT Bruce MI K3 5201 W6GF George CA K3 4452 KK7P Lyle WA K3 3036 AB7CE Roy MT K2 40 (QRP) N1JM John AZ K3 2555 KD0HII Brian IA K3 3672 KD5ZVE Jimmy OK FT897 NS7P Phil OR K3 1826 73, Phil, NS7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
> ...The frequency (14.316 MHz) > was plagued by some type of pulsed QRM - short pulses at about a 2 second > interval, about S6 here in Oregon with my antenna pointed east. I was able > to copy through it without too much trouble. I noticed it too, and found that using AutoNotch reduced it enough to hear some weak stations through it. 73, Lyle KK7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Re: Elecraft SSB Net results (4-17-11)
|
|
On Sun, Apr 17, 2011 at 7:37 PM, Lyle Johnson <[hidden email]> wrote:
> >> ...The frequency (14.316 MHz) >> was plagued by some type of pulsed QRM - short pulses at about a 2 second >> interval, about S6 here in Oregon with my antenna pointed east. I was able >> to copy through it without too much trouble. > > I noticed it too, and found that using AutoNotch reduced it enough to > hear some weak stations through it. It seems to be strongest somewhere in the Tri-state. I auto-notched it then tried to filter it out with no luck (notch helps but its still very distinct). Another note, I don't know about everyone else but 20m at 2PM EDT (1800z) yesterday was very very noisy. -aps ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Re: Elecraft SSB Net results (4-17-11)
|
|
In reply to this post by Phil Shepard
I had intentions of checking it Sunday and monitored the preceding
net, but was called to breakfast about 30-min before net time (10am local). I got reading the newspaper and missed the net. I had an interesting contact earlier on 20m with W6SMJ/mobile south of Visalia, CA coming from the DX Conference. He could hear my 16w fairly well though QRM finally drown me out (I supposed it was all those guys with new KPA-500 tuning up!). Conditions seemed real good at that time. I use a Hygain TH3mk4 triband yagi at 50 feet. 73, Ed - KL7UW, WD2XSH/45 ====================================== BP40IQ 500 KHz - 10-GHz www.kl7uw.com EME: 144-1.4kw, 432-100w, 1296-testing*, 3400-winter? DUBUS Magazine USA Rep [hidden email] ====================================== ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Elecraft SSB Net results (5-1-11)
|
|
In reply to this post by Phil Shepard
We switched to a new frequency this week - 14.3035 MHz. It seemed to work
out, so we'll try it again next week at the same spot. The turn-out was modest this week, 23 participants. The only discussions were audio checks and a request for feedback on the KPA500 (nobody on frequency had one yet). The northeast US was light, and all rigs were K3s this week. Here is the list of participants. Station Name QTH Rig S/N KE5GBC Mike TX K3 5047 KD8NNU Don MI K3 4912 K4TM Cary VA K3 3448 W5ETJ Gary TX K3 3227 W7NMD Palmer AR K3 3779 VE1CHW Rob NS K3 1680 AD5SX Paul NM K3 4645 AE6IC Fred CA K3 2241 WB6CLZ Mike CA K3 4522 W8OV Dave TX K3 3139 AK4IK Ian GA K3 281 W4PFM Paul VA K3 1673 N6JW John CA K3 936 K6LMP Lou CA K3 3805 KC5RY George TX K3 5208 W0CZ Ken ND K3 457 K2XT Rick NJ K3 3814 W0FM Terry MO K3 474 K4GCJ Gerry NC K3 1597 KL7UW Ed AK K3 4340 KB0YH Gus CO K3 441 W8YMO Harry OH K3 166 NS7P Phil OR K3 1826 73, Phil, NS7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |